How To Properly Maintain Battery Storage Systems

battery storage systems

Little do people know, but battery storage systems actually play a big role in providing renewable energy while still meeting electricity demands. So, yes, if you’re still wondering what these battery storage systems are for, it is definitely not your typical stock battery at the back of the room. Battery storage systems are a one-of-a-kind tool that is beneficial in providing quality electricity without compromising nature’s health. 

What does it exactly do?

Battery storage power is a far cry from the batteries we put behind children’s toys and remote controls. Let’s give a more vivid explanation of how battery storage systems work. As we’ve mentioned above, it is a big contributor to providing renewable energy while not falling short of being a remarkable source of power in the industrial, residential, and commercial sectors. So to sum it up, these systems run on renewables such as solar power and wind power. 

These solar and wind power is stored in battery storage systems and is then reserved and used if the situation calls for it.  

How important are battery storage systems?

The simple fact that they encourage the use of green energy is already a valuable feature that is prized in electrical-related industries. Considering that anything power related is tagged as a plague to natural resources, battery storage systems are greatly favored in ensuring that the power supply can never run out. 

Just imagine, if the electrical supply only relies on, electric-generating machines, what of it if one of them falls short? This will only entail costly maintenance and repairs. On the other hand, if you have a source of power that relies on natural resources, then this will eventually be more beneficial in terms of having a more reliable and steady energy supply. 

Possible faults of battery storage systems?

Batteries are susceptible to faults because of their sensitive nature. This is why daily maintenance checks need to be in the works for these kinds of systems to prevent such defects. Just how sensitive are we talking about? They are preferred to work best between a given temperature. They must be between 15 and 35 °C so that they can prevent possible malfunctions. 

So to say, these kinds of batteries when exposed to low pressures can slow down the electrochemistry. Meanwhile, when they are at higher temperatures, this would allow corrosion to seep in. This is also why most batteries are placed in places that are shaded and well-ventilated. 

Terminal corrosion can also be a suspect for battery storage system faults. This happens when you tend to overcharge electrolyte leaking from overfilling with water. However, there are ways to remove corrosion and that’s by using antioxidant material. Make sure to check with your manufacturer if they have recommendations. 

The Fluke techs to use to ensure optimum performance!

With all of these faults possibly infesting your battery storage systems, you need to have the best of the best test tools there are. Fluke tools specialize in providing only the best quality test tools to ensure that your machine has zero issues. These yellow-holstered tools are trusted by professionals in different industries and sectors in the entire world! 

So, if you want to make sure that your battery storage systems are working well and fine for the next year to come, make a good investment by purchasing one of the finest test tools on the market.

You must be wondering, what’s the best Fluke tool to check up on Battery Storage Systems, considering that there are more than a hundred different Fluke tools in the market that specializes in different mechanical faults and maintenance issue. But given our topic for today, the best Fluke tool for the job must be the Fluke Battery Analyzers.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.  

Sources:

Read more
, ,

Keeping Lightning Protection System With Fluke Tools

Lightning is the result when there is too much interaction between the positive and negative charges in the clouds. The air acts as the insulator between the charges and the cloud and the ground. When there is too much build-up, the air brakes, and the electrical discharge we know as lightning is produced. As lightning carries a significant amount of electrical charge, it is very dangerous. In the USA, it is the leading weather-related cause of death. That’s why lightning protection systems are a necessity, especially during the rainy season.

What is Lightning Protection System?

A Lightning Protection System is used to minimize the effect of lightning on a structure when it strikes. They protect the electrical components inside the building and prevent fire and electrocution. Usually, there is a metal rod mounted on top of buildings that receives the lightning as it strikes the tower. The metal rod should be connected to the ground via paths that receive the lightning.

Metal rods are usually made of copper and aluminum and other conductive materials. Because of the high current levels, no one can guarantee safety from lightning strikes. Even side flashes can cause damage. But when you have a lightning protection system, the current is being distributed into every conductive path there is to spare the structure.

Benefits of maintaining the Lightning Protection System

Reduce the risk of fire and explosions.

As they say, when there’s smoke there’s fire. When it comes to lightning, the same also applies. Lightning carries a huge amount of electricity that when not properly taken care of, might result in a fire. The metal in electrical systems and plumbing systems in a structure may become very hot and the nearby combustible materials will start to catch fire. In 2021, there was a case of fire in Cebu caused by lightning that struck a transformer. A house was burned down because of this.

There are homes that are made of highly combustible materials. Homes that use corrugated stainless-steel tubing are prone to explosions. Corrugated stainless steel tubing (CSST) is commonly used because of its flexibility but it is highly combustible.

Protect electronics from surges.

Because the lightning protection system distributes the current to different conductive paths, it saves the electrical and plumbing lines of a structure from damage. It protects the electrical wiring, circuit breakers, and any electric appliances plugged in or not.

Increase property value.

Since the lightning protection system is considered a home improvement, the residential value increases. The residential value is determined by the condition of the house, neighborhood, and other home improvements. The increase may not break even with the cost of installing an improvement but at least it subsidizes the cost of the installment.

Reduce homeowners’ insurance premiums.

There are some home insurance companies that offer reductions in home insurance premiums when you have a lightning protection system installed.

How to maintain a lightning protection system with Fluke Tools?

Maintaining the lightning protection system with the ever-dependable Fluke Tool will lessen your worry about lightning-related incidents completely. Preparation will always reduce the impact of the incident. Here are ways how to maintain your lightning protection system with Fluke Tools.

Assess the existing grounding system, and measure soil resistivity.

Measuring the soil resistivity will help you determine which electrode to use and the depth it should be able to reach to get a lower ground resistance value.

Best Fluke Tool for assessment: Fluke 1625-2 GEO Earth Ground Tester

This Fluke ground tester measures earth ground loop resistances using clamps. With this Fluke tool, the danger and time-consuming job of disconnecting parallel grounds will not be a worry anymore. It allows you to run tests in places where soil may not be easily available (inside buildings and power pylons). It gives you a more accurate reading because of its Automatic Frequency Control. Fluke Ground Tester can store up to 1500 records and have them read via the USB port.

Fluke 1625-2 GEO Earth Ground Tester. Photo from Fluke.com

Measure ground impedance and continuity and take other preventive maintenance steps.

Measuring ground impedance after the soil resistivity will help you determine the soil’s ability to distribute the amount of energy it will receive when lightning strikes. With the help also of the Fluke 1625-2 GEO Earth Ground tester, you can also determine the equipotentiality of grounding system components like DC and AC resistance.

Troubleshoot problems.

Identify loose connections and overheating conductors. Also, measure insulation resistance to identify insulation breakdown.

Best Fluke Tools for troubleshooting: Fluke Infrared Cameras

Packed with wireless connectivity and temperature range, Fluke Infrared Cameras deliver the needs that most electrical professionals need. They also come with Fluke Smartview software. Identify the problems right away with accuracy through the graph view and safely with their wireless features. Check out the infrared cameras that Fluke has!

Fluke 1577 Insulation Multimeter

This insulation multimeter measures ac/dc voltage, dc millivolts, ac/dc milliamps, resistance, and continuity wirelessly at a safe distance. You won’t have a hard time reading the measurements even in cramped areas because of its big display screen and backlight. This compact multimeter also allows you to measure true RMS. It automatically shuts down when not in use – thus preserving the battery life!

Fluke 1577 Insulation Multimeter. Photo from Fluke.com

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Sources:

Read more
, , ,

How To Prevent Overheating Electrical Panels Using Fluke Tools!

how-to-prevent-overheating-electrical-panels-using-fluke-tools

Let’s give a brief background on why electrical panels are important to every household, or to every establishment in general. This little rectangular box holds the power to every electrical aspect of buildings and houses. We know it can seem a bit intimidating to look at but once you get the hang of it, it’s straightforward. Let’s just say that without electrical panels, you won’t be able to have control over electricity in certain areas of your home (if you’re a homeowner) or establishment (if you’re a maintenance professional).

Whether it be on buildings, homes, industrial plants, or in any area that requires electrical power, they will never be alive without electrical panels. So, regarding their importance, what would now happen if you had a faulty electrical panel in your midst, or worse, an overheating one? Here’s how you can resolve them with early detection using Fluke tools!

Reasons for overheating electrical panels

Initial, don’t be confused. All electrical panels may feel a bit warm since electrical currents run through them. There is a difference between a warm electrical panel and an overheating one. Remember, each circuit breaker is assigned to one current flow. Take a house, for example, one current flow (that is aligned to a breaker) may be connected to the bedroom, another can be connected to the kitchen, and so on.

Take note that circuit breakers also have ratings. So, if it exceeds that rating, it will also be a cause of a warm-up. However, these are not the only reasons why your panels are heating up. Here are some more probable reasons why they are overheating…

It might be a case of a loose connection.

Watch out for loose connections as this can generate heat. Loose connections often happen with the breakers. You see, when installing these little switches inside the electrical panel, you need to make sure that it is secured with the clip that holds them to the bus bar. If all else fails, maybe you need to bring out your screwdriver and tighten the lug that holds the breaker.

Current limits may also be in the works.

Keep in mind that electrical panels consist of multiple currents in different breakers, therefore, when one of those currents exceeds their rating then there might be a “trip” to the current flow breaking electricity. This can be a cause of power-hungry appliances. And, more often than not, when such appliances are often turned on and off, this can cause distress on your breaker. A simple solution would be to reset it. Switch it off, and switch it back on.

Faulty breakers also make electrical panels to overheat.

How do you know if one of your breakers is bad? An indication can be flickering lights or if your power is not working continuously in certain areas of your place. These are some of the signs that you have a bad breaker on your hands. If in such circumstances you’ve had your breakers replaced and are still experiencing the same thing, then it might be high time to upgrade to a modern panel.

Fluke tools to use for preventive measures and safety.

The iconic yellow holstered tools are a phenomenon in the industrial department. They are the best test tools that are highly recommended by professionals and maintenance men/women alike. They are not only known for their safe testing features but they are also well-applauded for their accurate performance. People working with Fluke tools in hand can operate more confidently, quickly, and safely, especially when working on highly sensitive projects. But that’s not all, Fluke tools are also praised because they can prevent all kinds of faults from a wide variety of tools, machines, electrical equipment, and even devices.

Considering preventing the overheating of electrical panels, Fluke tools can play a big role in determining faults in advance. Considering that most of these faults cannot be seen by our own eyes and might be too dangerous for us to inspect by hand, Fluke tool comes to the rescue with its high-performing tools. Here are some of the Fluke tools that can be an asset in the preventive maintenance of overheating electrical panels…

  1. Fluke Insulation Testers – They can be efficient in measuring phase-to-phase or phase-to-neutral voltage.
  2. Fluke Clamp Meters – They are good for measuring currents and looking for current harmonics.
  3. Fluke Energy Analyzers – These Fluke tools are great for monitoring voltage, harmonics, and load.
  4. Fluke Thermal Imagers – The preferred tools for spotting hot and cold spots.
  5. Fluke 1735 Three-Phase Powe Logger – They are great for measuring currents.
  6. Fluke 1587 Insulation Multimeter – They are perfect for measuring voltage and voltage drops.
  7. Fluke Insulated Tools – If you need to tighten bolts, make sure to use insulated tools for extra safety from harmful electricity.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Sources:

Read more
, , , , , ,

Maintenance Management is Keeping the World Up and Running (Here’s Why!)

maintenance-management-is-keeping-the-world-up-and-running

Going the extra mile to make sure your machines and devices are running smoothly can reap rewards in the long run. Many don’t know it, but maintenance management is a key factor in helping keep the industry up and operating. Without daily maintenance checks, a lot of machines and devices may be susceptible to faults and other malfunctions. This alone might negatively impact the productivity of workers and put a wedge on their day-to-day processes.

Just imagine if important assets suddenly shut down. Take the internet as an example. Nowadays, if your internet provider experiences any hiccups, a whole population is affected by it, with their work, school, entertainment, and a lot of other things. It’s quite obvious that people hate experiencing downtimes.

This also applies to valuable assets. Unwanted machine/device breakdowns are unforgivable especially if you need to meet certain schedules or if the machine on hand is responsible for providing power. Technically, this only highlights how important maintenance management is especially if we’re living in a machine-dependent economy. So, let’s go in-depth into just how maintenance management keeps the world up and running and how we benefit from it.

Why everyone should practice maintenance management.

Maintenance management deals with caring about the performance of every industrial tool, device, or machine. Remember, no matter how high-end your device is, it will always be susceptible to faults. Having maintenance management in your protocols can not only help with machine health but it can also be of advantage to the people working with the machines.

Having maintenance management can benefit you in these ways:

  • Longevity of the machine/device – If you do daily maintenance checks, you can easily spot possible faults that might occur. This will also save you from costly repairs.
  • It will keep the workplace a healthier environment – A well-conditioned machine keeps the workers around it more confident and assured that there won’t be any unwanted surprises.
  • Improves efficiency – if your tools are well-maintained, this will allow them to be more efficient and reliable. Accurate data and such can be expected from them.
  • Will be cost efficient – If your tools are working well, then there’s no use to spend on replacements. Whereas when you’re handling a machine that’s practically breaking down, then expect a lot of costly repairs to be made.

How efficient Fluke tools are for maintenance management?

We’re talking about the best of the best. Fluke tools are the most reliable tools for maintenance. Professionals, men, and women who work in the maintenance field prefer to have Fluke tools by their sides when doing maintenance rounds. Why? These tools aren’t just ahead of their time, but they also ensure every worker’s safety on the field. Here are the top reasons why you should have fluke tools with you during maintenance management…

  • They allow you to take measurements from afar so you don’t have to risk your safety by having close proximity to malfunctioning machines or devices.
  • Fluke can see what the naked eye cannot – they can spot possible faults that may occur.
  • These tools can also give a diagnosis of what you should do once a fault is spotted.
  • They can give and send real-time results.
  • Some Fluke features 2 or more functions in one. 
  • They encourage wireless testing.
  • Fluke instruments help to eradicate the drastic costs attributed to manual errors.

The best maintenance practice you can apply?

Do them as often as you can. If you have reliable Fluke tools by your side, why not test and test your equipment and machines as often as you can? The key to working closely with sensitive (but important) assets is to never be complacent with them. Usually, the best assets are also the costliest ones, and Fluke corporation understands this dilemma. Therefore, they built the best tools for the job.

So, as much as possible, the best maintenance management practice that is applicable anywhere and everywhere is to always evaluate your equipment are often as possible. Therefore, most maintenance men and women on the job roam around with a device in hand. Trust us when we say you will rarely see one without a testing tool with them. This is because most Fluke tools are not even that big that it becomes a nuisance to bring along. Most of them fit right in your pocket! So yes, they are not only dependable, but they are best for hand carry tools.

Going back… So how does maintenance management keep the world up and running again?

By simply taking care of the machines and equipment that makes the world go round of course! One of the main goals of maintenance management is to make sure that everything is working in its tippy-top condition. Living in a machine-generated world, this process speaks of significant importance every day. Add in Fluke tools in the picture, and we are pretty sure that things can last a bit longer.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Read more

The Importance of Monitoring Power Consumption

the-importance-of-monitoring-power-consumption

Do not take your power consumption for granted. Logging and keeping track of energy saved and wasted proves important when managing large facilities. So what does it entail? Energy monitoring is the process of tracking, recording, and visualizing energy consumption, which can be across an entire facility or right down to an asset. Yes, that is how thorough the process can be.

Benefits of monitoring power consumption with Fluke power loggers.

Monitoring power consumption is of vital importance in every facility. Electrical power can be so available and so easily consumed that we tend to abuse it sometimes. In return, it abuses our machines and our costs as well. Therefore, keeping one eye on daily power consumption can be beneficial to future uses in such a time when important energy management decisions are needed to be made. Here are more of its benefits and why you should monitor power consumption daily.

Monitoring power consumption can give accurate measurements.

Monitoring power consumption also entails being accurate in utility bills. And when you are running huge facilities, you would want those reports on point. Sadly, one thing that it will not tell you is sudden shoot-ups in costs. Therefore monitoring power consumption comes in handy since it can give you accurate measurements when it comes to billing.

Monitoring power consumption can let you identify issues in advance.

If you are consistent in monitoring your power consumption, it can have an effective impact in terms of equipment performance. Fluke tools can immediately recognize when assets, tools, and utility machines are not operating efficiently. Spotting these faults right away can have loads of benefits in return since faulty machines tend to consume power more (and not in a good way).

It applies to real-time monitoring.

What’s more efficient than real-time monitoring? Real-time monitoring can be done with the use of Fluke tools. It’s better to have data on machines as soon as they break down rather than leaving it behind and waiting for experts to examine them. With Fluke tools, you will be able to know what’s wrong in a matter of seconds!

Moreover, if daily monitoring takes place, it can also act as predictive maintenance for all machines. This will reap rewards in the future since it will promise fewer failures which will entail little to no downtime.

Why fluke power quality logger is the best bet.

With the use of the Fluke power logger, you can be able to assess and properly address power problems that are plaguing your facilities or specific machines that also need power monitoring. By doing so, you will be able to keep track as to which areas your energy power is tripping.

The Fluke power logger can automatically capture and log voltage, current, power, harmonics, and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles. In other words, it will be able to successfully troubleshoot power quality issues with ease.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Shop Now: https://presidium.ph/shop/?wlfilter=1&product_cat=fluke-power-quality-analyzers

Read more
, ,

4 Common Electrical Grounding Mistakes

4-common-electrical-grounding-mistakes

Upright grounding is more than a safety feature. In fact, it safeguards tools, equipment, and other devices that are supplied in the facility. Therefore, effective grounding procedures must take place in every part of a project and must never be overlooked. With the absence of proper grounding systems, you might be able to expose yourself to the risk of electric shock and instrument errors. However, at times, there are grounding errors that cannot be assisted. Here, we will be able to discuss the five common electrical grounding mistakes that some people make.

Why test ground systems?

Soils do not stay the same over time. Corrosive soils, high moisture content, salt, content, and elevated temperatures, can decrease the quality of your soil. In a natural setting, this might be okay for backyard gardens. However, if you are building extremely sensitive projects on top of it, you might want to double-check if the soil is compatible with the proper standards.

According to an official Fluke source, faulty ground systems will omit electrical problems that will result in unwanted downtimes. The root causes. Poor grounding and poor power quality.

The common electrical grounding mistakes…

There are different projects that require proper grounding. One can differ from the other, but one thing rings true, and that is never to forget proper grounding.

1 Do understand soil resistivity.

The number one of a grounding system is to provide a low impedance route to the earth. Going back, soil resistivity plays a significant role in the process since it is the main basis of any grounding system. It relates to a lot of functions including soil type, moisture content, and temperatures. These kinds of characteristics pave the way for ground impedances.

Take note that the current will likely follow through a path of low resistance rather than a high one. High soil resistance will result in unsafe paths that will eventually increase equipment failures and human injuries.

2 Failing to measure the grounding system.

One thing you need to check is the grounding systems if there are any vacancies. Make sure that there are none so to speak of. A variance may occur over time that was not intended for. As an example, if a ground rod hits a large rock and it does not reach the depth that it’s required to be at this may cause complications.

3 Always reattach ground paths.

In such instances that you must relocate, replace, or remove equipment for repairs, it is of utmost importance that you reconnect the entire path completely. Technically, all connection in the ground path includes setscrews, locknuts, and threads. You should fully evaluate the continuity before putting them back into the system.

Also, it is probably best for you to check for any corrosion, rust, and dirt since impurities can contaminate metal raceways.

4 Using ground wire incorrectly

Pay attention to the conductor’s bends and lengths! Ground wires that are bundled up together can create high impedance and this will give way to higher voltages on the equipment during transient events. Also, refrain from coiling the wires since this will prevent the current to go through a straight and simple path.

Standards for ground testing…

Not sure if you are meeting the standard for grounding? Here’s something to guide you along the way! These organizations provide recommendations and/or develop standards for grounding to ensure safety.

Remember, the goal of these grounding standards is to help you ensure the reliability of your equipment in such cases that faulty currents occur.

Purchase from an authentic source!

Hey, you made it to the bottom! Be sure to check out Fluke Earth Ground Testers through our official site! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines.

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

https://presidium.ph/shop/?wlfilter=1&product_cat=fluke-earth-ground-testers
Read more
, ,

Can Too Much Heat Affect the Performance of Fluke Test Tools?

can-too-much-heat-affect-the-performance-of-fluke-test-tools

The simple answer to this is yes, it does. Fluke test tools no matter how high performing they are, are still susceptible to a decrease in performance if there is too much heat involved. But in all fairness, it’s not just for Fluke tools, heat is a long-time enemy of electronics in all forms and variations. Therefore, most gadgets are preferred to be stored in cooler places. However, this may pose are a difficult task for those who are residing in tropical countries, or in places that are constantly under immeasurable heat.

How can heat cause electronics to lessen in performance?

Precisely, electronics are at their best performance when they are used in lower temperatures compared to high ones. In such cases that you expose your tools regularly to high heat temperatures, expect that your tools may decrease in life and may no longer be as reliable as it once was.

Also, if your tool is always under heat, don’t be surprised if it suddenly begins to break down or malfunction. Remember, allowing devices to run for long periods of time at high temperatures will provoke your tools to be less functional.

How does a Fluke tool perform when under extreme heat?

We’ll give you an idea. According to MasterFlex, a civilian employee in Iraq, Robert Kirkman who is regularly using a digital multimeter under the harsh heat of the desert sun has experienced malfunctions with his DMM because of the heat. He says that the screen turns black regularly. He quoted “So far, the meters have recovered after several hours in air conditioning, but this causes a severe inconvenience when troubleshooting equipment. I am using the tools to work on power generation equipment, power distribution and environmental control systems.” Technically the systems that he’s trying to troubleshoot are HVAC systems to keep soldiers cool.

Although he was a bit beaten down with the device’s performance, he clarified that it’s not the Fluke test tool’s fault. He has been using the brand for nearly 30 years and is quite content with its performance. He clarified saying, “This environment is very extreme and most equipment we use was not designed for it.” Therefore, it’s not just zeroing out with one tool, heat has the tendency to really decrease the performance of every electronic, especially in extreme conditions.

Ideal operating temperatures.

Not too hot and not too cold is the most ideal room temperature for your tool to work with. This will be approximately 50 degrees F to 82 degrees. But let’s not put our focus too much on hot and cold temperatures. There are other factors that can also contribute to the performance of your Fluke test tool. 

Humidity also gets a hand in your tools’ performance. Excessive humidity or extreme dryness. This kind of environment can cause errant discharges and can trigger condensation and water which is not preferred for your tools.

Managing heat with electronics.

But worry not, there are a lot of ways how you can keep your test tools cool in the blazing summer heat. According to the Institute for Advanced Study, there are five easy ways for you to manage heat when your electronics are in use, especially those that are quick to overheat.

  1. Allowing airflow. Don’t keep your tools compressed with thick and heavy materials. Allow a 2–3-inch space around them to let air cool heater areas or spots. Gear free from obstructions that are not granting your device any airflow.
  1. When not in use, stay away from heat. Therefore, don’t just leave your tools lying around under the sun. Remember, no matter how reliable and rugged a Fluke tool can be, it will work well when it’s in a calm and cool environment rather than being left alone in heated places.
  1. Stacking is a no-no. Electronics can get hot on their own. To help manage the heat around your device, prevent them from making heat on their own. So, it’s better to lay them all separately.
  1. Keep it clean! Okay, this is more of maintenance advice rather than heat advice. But nevertheless, it does help it cool down. Just don’t wipe it with hot liquid of course!
  1. If your tool overheats, shut it down! Let it sit and cool down before using it again. And remember, allow a lot of airflows so that your tool doesn’t continuously overheat.

Get your test tools through an authentic source!

Rest assured that through proper measurement, you can achieve the best PV solutions for your establishment, homes, facilities, and businesses. So, if you’re currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines, you’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Read more
, , , ,

Safety Installation of Photovoltaic Systems Using Fluke Tools

safety-installation-of-photovoltaic-systems-using-fluke-tools

One of the most revolutionary inventions (and is continuously developing) is photovoltaic systems. What may seem like a feature in most flashlights can now be a part of our everyday lives! Photovoltaic systems are an applauded feature in most establishments because of their ability to produce natural energy from the sun. Not only that but it also holds other benefits as well. Therefore, a lot of people are preferring to install solar panels to power their establishments. With this said, let us talk about the safe installation of photovoltaic systems using Fluke tools.

Photovoltaic systems and Fluke tools…

Fluke was commended for its impeccable performance in the industrial field. No wonder why most maintenance and women favor these yellow holstered tools for their maintenance and test checks. This specifically includes the safe installation of photovoltaic systems. If you have not experienced installations of this innovative product yet, you will be surprised by how sensitive they are.

Naturally, the key role of Fluke tools in safely installing these systems in homes and different establishments. You see, what most people do not know is that PV systems run on batteries. It can significantly decrease electricity bills and make the most out of sustainable lights. Seriously, what more can a person ask? Therefore, Fluke tools make the most key role in maintaining these systems because of their specialty to detect underlying faults of electrical devices, panels, and the heat intake of your PV systems.

Potential photovoltaic problems

Primarily, you must consult a professional in such time you are decided to install PV systems in your place. Again, the installation process is most crucial and sensitive, so it is important for you to have trained hands to oversee everything. If you have hired untrained workers to do it on the other hand, then better be ready to face a couple of mishaps along the way.

PV systems are great investments especially when they are working properly. Therefore, the installation is a significant process when quality performance is on the line. Nevertheless, here are the possible faults that may occur during the installation and operations of PV systems according to an official Fluke source.

Potential problems that may occur:

  • Extensive shading of the PV array
  • Insecure structural attachment to rooftops and other structures
  • Inadequate weather sealing for roof and other penetrations
  • Unsafe wiring
  • Unsafe battery installation or improper battery maintenance or use
  • Insufficient conductor ampacity and/or insulation type
  • Using unlisted equipment
  • Wrongfully applying listed or unlisted equipment
  • Improper placement of overcurrent protection and disconnect devices
  • Improper system grounding
  • Poor labeling on major system components and disconnected devices
  • Inadequate documentation on system design and operating and maintenance requirements
  • Inadequate environmental protection for certain system components

Last min inspections.

So, you have installed everything, and all things are already in their place, right? Then it is high time for final inspections! This will also come in handy for maintenance purposes. Given the fact that PV systems are always in direct contact with violent UV rays of the sun, as well as its other components, having a quick maintenance check should be in the works to make sure that your PV systems stand the test of time.

Typical maintenance items that PV installations may require include:

  • Check the wiring connections and terminations if it is loose or is starting to corrode.
  • See if the wiring harnesses are neatly bundled and protected.
  • Make sure that your PVs are clean! This means they are free of damage and structural integrity.
  • Inspecting roof penetrations and weather sealing.
  • Maintaining batteries, which may include cleaning, adding electrolytes, charge equalization, and replacement if needed.

Make sure to use the right tools for the task!

Yes, we are talking about the indestructible Fluke test tools. They are undoubtedly the best tools for the task. Rugged, dependable, and most of all, ensures optimum safety for all users. So, if you want to make sure that you are getting the right results for your photovoltaic systems, better use a trusted tool to get the job done.

Ideally, you should be able to perform tests on your PV systems whether you are installing or maintaining them. The most preferred test tool for the job is a high-quality digital multimeter with an amp clamp. So, if you’re planning on running on solar panels permanently, consider having them on standby for daily maintenance checks.

Use it as soon as you receive the equipment and again after the installation. This will help you get a clear grasp of output voltage and current. Also, remember that the appropriate unit needs to be connected in series to provide the proper voltage. Make sure that the sections are connected in parallel to provide the proper current.

Get your test tools through an authentic source!

Rest assured that through proper measurement, you can achieve the best PV solutions for your establishment, homes, facilities, and businesses. So, if you’re currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines, you’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Read more
, , , , , , , , ,

Smart Ways to Save Energy and Prevent Downtime

smart-ways-to-save-energy-and-prevent-downtime

Fluke is a powerhouse tool that can see, hear, and detect all kinds of electricity-related health situations. And that is only one out of a hundred reasons why it is favored by maintenance men and women all over the world. But Fluke tools can only do so much when people get a bit dismissive about caring for their electronics and electricity in general. Therefore energy-saving has become a smart practice for most households, buildings, and facilities. Today, we’ll teach you how to save energy using the most profound test tools in the industry – Fluke test tools.

Moreover, considering downtimes, electricity usage, when abused, can cause downtime. Like all things electronic, they are also prone to wear and faults with excessive use. Therefore adopting healthy practices is always preferable when consuming energy on a daily basis.

Importance of saving energy.

So, when we’re talking about how to save energy, we are not just singling out completely avoiding its use, but rather, we want to introduce smart ways on how you can do it. Energy-saving is a strategy that can completely help the environment, but other than that, it also comes in handy in preventing downtime incidents, abusing your electronics, and inducing excessive use of them.

Take facilities for example. It’s a given fact that most facilities take up loads of energy. And what most people might think is a natural thing that they no longer need to save energy, is a huge misconception. Energy takes up money, and when the electric bills pile up, most managers tend to have a double-take. Remember, we are no longer living in the last decade, this is the 21st century, and prices are hiked up. A quick solution? Have your equipment and machines evaluated and measured. You will never know, one machine might already be causing havoc in a way that is affecting your electric bills, the surrounding environment, and the people working close to it.

To this day, electricity and its availability are almost infinite which is why monitoring, measuring, and testing take a huge significance in establishments. Therefore, we need to consume energy in the most conducive way. In all honesty, electricity and how it is important to our day-to-day tasks can make or break productivity. That’s why, with proper monitoring, we are also at the same time, caring for our businesses or our homes.

Why measurement is relevant to save energy…

In all fairness, measurement is crucial in every point of work to know where you needed to align, adjust, and most of all make strategic decisions to meet goals. This is like our current topic. To save energy, you need to know how much energy is being wasted, you need to gauge if the equipment and machines are the ones that are causing them, and you also need to know which ones need immediate solutions.

Above else, data and logging still reign supreme in businesses, in maintenance, and in a lot of aspects that entail work. You need to measure how much energy you are taking up and see if the numbers are still aligning. This will allow you to document energy waste and machine faults. This information plays a crucial part for future reference.

Ways to save energy…

One of the very known characteristics of Fluke tools is its ability to promote energy-saving, and electronic care, and to give solid solutions to maintenance problems concerning electric machines. The very first thing you want to know when you are saving energy is the health of your electric machines and the overall power that holds them.

And with the help of Fluke tools, this is now achievable in quick and efficient ways. You see, when your electronics are spilling out energy everywhere without you knowing, then your energy-saving methods might be all for naught. This is something you want to check up on daily, especially if you are consuming them every day. So, here are things to keep in mind, on ways to save energy.

1 Mind your bulbs! They can be beneficial to save energy

If you are working in a huge facility, using traditional incandescent lightbulbs can consume excessive amounts of electricity. Try using halogen incandescent bulbs and compact fluorescent lights. Also, take note that fluorescent lights can also have faults. Therefore, it is also preferred for you to use a Fluke Fluorescent Light Tester for easier detection of underlying faults.

2 Turning off lights or appliances to save energy

The simplest and easiest way to save energy is to unplug them when not in use. And we are not just saying to turn the switch off, we mean going the extra mile and unplugging them from sockets. Machines and electronics may seem hardcore materials, but they are also prone to overheating and faults due to excessive use.

3 Be mindful of “Phantom loads”

Not even kidding this is a totally a major source of energy waste. This pertains to electricity used by electronics when they are turned off or in standby mode. Consider the use of smart power strips to eliminate this electricity fault.

4 Check your HVAC systems! They can be a huge factor for you to save energy

This abbreviation stands for Heating, Ventilation, and Air Conditioning. These are three things that also accept much energy in an establishment. There is a number of Fluke tools that can ideally help you with this.

For moisture intrusion:

  • Fluke Ti480 PRO Thermal Camera
  • Fluke 971 Temperature Humidity Meter

For heat loss:

  • Fluke 561 HVAC Infrared and Contact Thermometer
  • Fluke Ti480 PRO Thermal Camera

For monitoring indoor air quality:

  • Fluke 985 Particle Counter
  • Fluke 922 Airflow Meter/Micromanometer

For verifying HVAC system performance:

  • Fluke Ti480 PRO Thermal Camera or Fluke 561 HVAC Infrared and Contact Thermometer

Get your test tools through an authentic source!

Rest assured that through proper measurement, you can achieve the best energy-saving solutions for your establishment, homes, facilities, and businesses. So if you’re currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines, you’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Read more
, , , , ,

How Often Should You Calibrate?

how-often-should-you-calibrate

Calibrate your Fluke tools to keep them in pristine shape. For test tools, calibration is one of the utmost crucial steps for you to maintain their performance level and their accuracy in reading and testing. Many may think that calibration happens only once, but you need to do it based on the exposure to stress that your Fluke tool experiences. But the question remains, how often should we calibrate fluke tools?

There is additional to it than simply ensuring that the tools are dependable and safe. Take note that there are multiple calibration tools and not just one to ensure that all products and Fluke equipment are accounted for. There is also a thing called calibration intervals which also stands on important grounds when you are planning to do this on a regular basis, but we’ll get to that in a bit.

Importance of calibration

Fluke builds to last. The durability of products is one aspect that Fluke considers when building test tools. Therefore, Fluke is known for its rugged features and its ability to withstand harsh elements. Moreover, it can tolerate strenuous activities and pressure since these test tools are built to keep workers safe and confident working in risky environments. And that is what makes them so sought-after. Initially, when Fluke builds a product, one of the most important things we think about is how our instruments perform over time. And this is where calibration comes in.

Calibration ensures that the device is still well-equipped to manage activities that are in a high-pressure environment.  Moreover, performing calibration can reap rewards overall since you will be able to determine errors, faults, and the limits of your test tool.

What are Calibration Intervals?

Be aware of calibration intervals. As the name itself suggests, calibration intervals are the time in between calibration tests. It is the period that the test tools need before going back for a recalibration session. There is no hard rule for calibration but there is a couple of things you need to remember to determine whether your Fluke tools need one.

How often do you need to calibrate?

The utmost accurate calibration is twenty minutes intervals! We know that is a close call but don’t worry, this doesn’t mean that you need to calibrate every twenty minutes. A one-year calibration is preferred. But that is not only the one specific timeline that you must keep track of. If your Fluke tool is frequently in use and is mostly exposed to harsh environments, you might need to calibrate more often. Here is a quick guide to it!

Calibrate through manufacturer recommendation.

These are calibration instructions based on the manual itself. You can find your manuals tucked in the box of your Fluke tool. Every box has a warranty inside, if it doesn’t have one, then you better have a chat with your supplier. Those aren’t official Fluke products.

Also, keep in mind that the calibration interval may be different for each tool depending on the gravity of its usage.

Calibrate before undergoing a major critical measuring project.

It is preferred for you to calibrate your Fluke device accordingly before an extremely sensitive operation. Let us say you are about to do testing that requires accurate results. To achieve this, you need to prep your Fluke tool through calibration. Keep in mind that the older your Fluke tool is, the more it needs calibration to ensure that it is still at the tip of its performance.

Take note that operating on an extremely sensitive project may require you to act based on your finding. This fact makes it even more important for you to calibrate accordingly.

Calibrate after a major critical measuring project.

Calibrating before the project is just as important as calibrating your Fluke device after. In some industries that rely on accurate data. It is actually a required process for them to also calibrate after the testing. This is done because it ensures that the reference used can either show an intolerant condition before, during, or after the measurement project.

Calibrate monthly, quarterly, or semi-annually

As we’ve stated before, calibration is truly a recommended step for every Fluke test tool. The shorter the time span of your calibration, the better. This will ensure that your tools are in good reading condition. Plus, this will prevent you from receiving questionable readings during your operations.

So really, calibrate your Fluke tool whenever you can. Make it monthly, quarterly, annually, semi-annually, etc. Just always remember to calibrate your tool to keep them at their peak performance during every operation. But of course, the decision still stands with the user. You can either opt for shorter cycles or longer cycles depending on the results.

Calibrate through an authentic source!

Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Rest assured that all tools have gone through calibration and proper tests. Prevent faults from penetrating your projects that might cause bad downtimes by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Email us at calservices@presidium.ph / info@presidium.ph

Read more