Maintenance Management is Keeping the World Up and Running (Here’s Why!)

Going the extra mile to make sure your machines and devices are running smoothly can reap rewards in the long run. Many don’t know it, but maintenance management is a key factor in helping keep the industry up and operating. Without daily maintenance checks, a lot of machines and devices may be susceptible to faults and other malfunctions. This alone might negatively impact the productivity of workers and put a wedge on their day-to-day processes.

Just imagine if important assets suddenly shut down. Take the internet as an example. Nowadays, if your internet provider experiences any hiccups, a whole population is affected by it, with their work, school, entertainment, and a lot of other things. It’s quite obvious that people hate experiencing downtimes.

This also applies to valuable assets. Unwanted machine/device breakdowns are unforgivable especially if you need to meet certain schedules or if the machine on hand is responsible for providing power. Technically, this only highlights how important maintenance management is especially if we’re living in a machine-dependent economy. So, let’s go in-depth into just how maintenance management keeps the world up and running and how we benefit from it.

Why everyone should practice maintenance management.

Maintenance management deals with caring about the performance of every industrial tool, device, or machine. Remember, no matter how high-end your device is, it will always be susceptible to faults. Having maintenance management in your protocols can not only help with machine health but it can also be of advantage to the people working with the machines.

Having maintenance management can benefit you in these ways:

  • Longevity of the machine/device – If you do daily maintenance checks, you can easily spot possible faults that might occur. This will also save you from costly repairs.
  • It will keep the workplace a healthier environment – A well-conditioned machine keeps the workers around it more confident and assured that there won’t be any unwanted surprises.
  • Improves efficiency – if your tools are well-maintained, this will allow them to be more efficient and reliable. Accurate data and such can be expected from them.
  • Will be cost efficient – If your tools are working well, then there’s no use to spend on replacements. Whereas when you’re handling a machine that’s practically breaking down, then expect a lot of costly repairs to be made.

How efficient Fluke tools are for maintenance management?

We’re talking about the best of the best. Fluke tools are the most reliable tools for maintenance. Professionals, men, and women who work in the maintenance field prefer to have Fluke tools by their sides when doing maintenance rounds. Why? These tools aren’t just ahead of their time, but they also ensure every worker’s safety on the field. Here are the top reasons why you should have fluke tools with you during maintenance management…

  • They allow you to take measurements from afar so you don’t have to risk your safety by having close proximity to malfunctioning machines or devices.
  • Fluke can see what the naked eye cannot – they can spot possible faults that may occur.
  • These tools can also give a diagnosis of what you should do once a fault is spotted.
  • They can give and send real-time results.
  • Some Fluke features 2 or more functions in one. 
  • They encourage wireless testing.
  • Fluke instruments help to eradicate the drastic costs attributed to manual errors.

The best maintenance practice you can apply?

Do them as often as you can. If you have reliable Fluke tools by your side, why not test and test your equipment and machines as often as you can? The key to working closely with sensitive (but important) assets is to never be complacent with them. Usually, the best assets are also the costliest ones, and Fluke corporation understands this dilemma. Therefore, they built the best tools for the job.

So, as much as possible, the best maintenance management practice that is applicable anywhere and everywhere is to always evaluate your equipment are often as possible. Therefore, most maintenance men and women on the job roam around with a device in hand. Trust us when we say you will rarely see one without a testing tool with them. This is because most Fluke tools are not even that big that it becomes a nuisance to bring along. Most of them fit right in your pocket! So yes, they are not only dependable, but they are best for hand carry tools.

Going back… So how does maintenance management keep the world up and running again?

By simply taking care of the machines and equipment that makes the world go round of course! One of the main goals of maintenance management is to make sure that everything is working in its tippy-top condition. Living in a machine-generated world, this process speaks of significant importance every day. Add in Fluke tools in the picture, and we are pretty sure that things can last a bit longer.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Read more

Infrared Inspections: Keeping Systems Running Safely Using Fluke

Fluke infrared cameras can see what cannot be seen through the naked eye, and those are underlying machine faults. What could have been something disastrous that is undetectable can now be identified with the help of infrared cameras. Therefore, most maintenance professionals make it a habit to have daily infrared inspections to assure that all systems are running smoothly. In line with this, it also proves to be a useful tool when unofficial maintenance checks occur. But above all else, these inspections would even be more efficient using Fluke tools.

Advantages of using infrared cameras.

There is more beneath the surface of Fluke infrared cameras than its obvious function of detecting hot and cold spots. These devices are used in most inspections because they are efficient and easy to use. Not only that, but it provides workers with much-needed protection by allowing them to take inspection rounds from a safe distance. Moreover, these Fluke infrared cameras also come in different types to fit the ideal operation you have.

Here are twelve advantages of infrared cameras in operations…

  1. It can capture thermal images of all electrical panels and other high-load connection points such as drives, disconnects, and controls.
  2. Infrared cameras can see invisible thermal signatures to prevent faults before the damage occurs.
  3. Can measure temperature quickly, at a distance, and without touching the object you are measuring.
  4. Finding faulty terminations in high power electrical circuits.
  5. Locating overloaded circuit breakers.
  6. Identifying fuses at or near their current rated capacity.
  7. Identifying problems in electrical switchgear.
  8. Monitoring and measuring bearing temperatures in large motors or other rotating equipment.
  9. Identifying “hot spots” in electronic equipment.
  10. Identifying leaks in sealed vessels.
  11. Finding faulty insulation in process pipes or other insulated processes.
  12. Capturing process temperature readings.

How do infrared inspections benefit multiple systems to run smoothly?

Having annual infrared inspections in your schedule can benefit your equipment. This will not only ensure optimal health, but it will ensure that no unwanted downtimes can occur. Plus, the best part is that it does not only focus on one part of machines but all the facets that are included.

In line with this, having infrared inspections can accommodate multiple faults in one go. It can answer problems with electrical systems, electromechanical systems, process operations, and building diagnostics. Here is how it can help…

1 Use them in inspecting electrical systems.

Infrared cameras are great for detecting faults in electrical systems without even getting close to the target. They can capture thermal readings from a distance, but this is not all that they can read. Moreover, they can diagnose several different things as well. Here are some of them…

  • Unbalanced loads
  • Harmonics issues
  • Overloaded systems with excessive current
  • Loose or corroded connections that cause increased resistance in the circuit
  • Winding insulation failure in electric motors
  • Component failure
  • Wiring mistakes
  • Underspecified components

2 They can also be used in troubleshooting electromechanical systems.

They are also the perfect tools for examining motors, pumps, turbines, heat exchangers, gearboxes, and low-speed rotating equipment. You see, rotating motors or equipment, in general, can exhume rigorous amounts of temperature which makes them a perfect patient of Fluke infrared technology to find the following faults…

  • Reduced airflow from dust or debris
  • Alignment issues
  • Motor winding insulation problems
  • Power quality problems
  • Bearing issues
  • Lubrication problems

3 Process operations can also greatly benefit from infrared inspections.

The uses of Fluke in infrared inspections do not stop with electrical systems and electromechanical systems. But it goes as far as promoting safe inspections for refractory structures, tanks, vessels, steam systems, and heaters and furnaces. The industries that require these inspections are mostly ones that engage in petroleum and chemical processing, plastic, and steel.

This alone speaks volumes about how potentially hazardous inspection can be for most workers in the industry. However, with the use of Fluke tools, you won’t be sacrificing your safety since you’ll be able to take measurements from afar. Infrared inspections using Fluke tools can allow you to detect the following faults…

  • Damaged refractory insulation
  • Worn or leaking pipes
  • Defective valves and steam traps
  • Abnormal heat flow and heat gradients
  • Levels of solids, liquids, or gases in vessels such as storage tanks and silos

4 Building diagnostics

According to inertive, building diagnostics are made up of three main types and these are commissioning sensor-based monitoring, and investigation diagnostics. Technically, inspection is an important part of building diagnostics since buildings often do not perform as designed. Therefore, failures of building components and systems might take place.

The general steps to conduct a building diagnostic are:

  1. Collect data
  2. Identify the problem
  3. Define solutions
  4. Implement repairs
  5. Verify results

Fluke’s greatest function is to perform all these 5 steps with ease and security. Considering that thermal imaging has been saturated with building diagnostics for a long time. We’ll give you a run-through on how thermal imagers can be useful when it comes to detection and providing solutions.

Thermal inspections using Fluke can let you…

  • Improperly installed or missing insulation
  • Heat loss or gain
  • Air leakage and air bypass
  • Improperly installed or damaged HVAC ductwork
  • Leaks in buried steam or water lines
  • Moisture intrusion in walls, ceilings, and roofs causes damage to insulation and building materials tiresome boast exude

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! So basically, those are the great functions of infrared cameras and how it keeps systems running smoothly. Basically, these tools will ultimately help you in everyday operation to keep your systems locked and steady. So, are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck since Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

https://presidium.ph/shop/?wlfilter=1&product_cat=fluke-infrared-cameras

Read more

The Importance Of Electrical Grounding

What is electrical grounding?

Indeed, people have made notable advancements in the electricity department and electrical grounding is one of its big improvements. Technically, electrical grounding is storing electricity on the ground to prevent fatal risks from occurring. It is the process of connecting electrical panels, electrical motors, installations, electrical controls, etc, to the earth. As a result, this will make the environment safer for people since it reduces dangers from civilians and equipment.

What happens if I do not do electrical grounding?

You will be exposed to fatal shocks if your currents are not grounded. So, there are three things about wiring that you need to know about. Ideally, there is an active wire, a neutral wire, and a grounding wire. So, let us look at each one of them closely.

An active wire is the one that supplies power to the wires. Meanwhile, the neutral wire is the one that carries the current back. Lastly, the grounding wire is the one that can be attached to outlets as well as other electrical devices to be connected to the ground at the breaker box.

Originally, the grounding wire is only an additional feature. However, regardless of their “newness” grounding wires holds the most advantageous feature for people since it gives them complete protection from fatal shocks. The grounding wires work for electrical current to safely return to the ground.

As a result, if a short circuit did occur the current would flow through the ground wire causing a blown fuse or tripped circuit breaker. Better a blown fuse or a tripped circuit breaker than a fatal shock, right?

Benefits of proper grounding

Let us face it. Grounding is also one of the most overlooked aspects when it comes to electrical wiring. Nevertheless, according to Platinum Electricians, grounding your wires is an ideal choice to provide protection against possible shocks. They explained. “Grounding your electrical system is a smart and effortless way to make it a whole lot safer, as well as to protect against the very real possibility of having to deal with fluctuations in power supply.”

Just imagine if an electrical error occurs such as lightning strikes or power surges. When you have no electrical grounding, this will cause metal components to function as conductive surfaces. Therefore, these surfaces become electrically energized. And when people touch these surfaces, they will get shocked in the process.

Platinum Electricians further explained by saying, “If you want to safeguard all of your important assets, whether at home or at the office, as well as a lookout for the health and safety of everyone around you, find out if your electrical system is grounded”.”

Advantages of proper grounding according to Conserve Online:

  • Eliminates shock hazard
  • Protects equipment from voltage
  • Prevents electrical fires
  • Reduces equipment repair cost and downtime
  • Lowers levels of electrical noise (fluctuations in an electrical signal)

Why do you need electrical grounding

Not only does it bring notable safety benefits for people and their equipment, but it also brings a lot to the table overall. So, if you do not want your electricity grounded, you might want to think again. Take note of these four significant reasons why you should.

  • Electrical grounding protects against electrical overloads.
  • It stabilizes voltage levels
  • Earth conducts with least resistance
  • It prevents severe damage and death

Resolve these failures using Fluke Tools!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

List of Fluke models: https://presidium.ph/earth-ground-testers/

Read more

Fluorescent Light Tester: 5 Essential Light Tests Under 30 Seconds

Light is an essential part of life. It is used in houses, commercial areas, schools, and other places that we frequent as well. The sheer importance of it in our day-to-day activities makes it a point that it is also important to make sure they are functioning well. This makes the Fluke Fluorescent Light Tester a definite must-have for commercial maintenance people.

This test tool can perform five essential light tests in under 30 seconds! Come to think of it, if you are working in a big establishment with a lot of fluorescent lights, the Fluke Fluorescent Light Tester might just be the most ideal tool for you.

What are fluorescent lights?

Fluorescent light is one of the utmost versatile lightings that is used in commercial areas such as shopping malls, schools, grocery shops, offices, convenience stores, etc. You can find it anywhere and everywhere you go. As to why it is popularly saturated, it is a type of light that is known to be energy efficient. Not only that, but it has a lower price than LED lights.

What does a Fluorescent Light Tester Do?

If you’re working in an industrial department with a lot of fluorescent light, then you might want to consider having a Fluke Fluorescent Light Tester. One of the main functions of this tool is that it saves time and energy for the people involved. Imagine having to check fluorescent lights one by one without an advanced test device. You will be burning time, energy, and money by doing so.

The greatest thing about Fluke Flourescent Light Testers? It will enable you to do five essential light tests in under thirty seconds. What seems like what needs to be done in at least an hour or 30 mins for each light is reduced to thirty seconds. Amazing right? Let us take a closer look. Here are the specifications of the Fluke Fluorescent Light Tester:

General Specifications
Lamp test max output3000 V peak
Ballast test20 kHz
Ballast type discriminator≤3m (10 feet) distance
Pin continuity test< 1 kΩ
NCV (VoltAlert™)85 to 400 V AC45 a 67 Hz≤10 cm (4 in) distance
Environmental Specifications
TemperatureOperating: -10 °C to +50 °C (14 °F to +122 °F)Storage: -40 °C to +60 °C (-40 °F to +140 °F)
Relative humidity85% maximum
Safety Specifications
Safety ratingIEC 61010-1, pollution degree 2
Mechanical and General Specifications
Size21.5 cm x 3.0 cm x 6.5 cm (8.5 x 1.2 x 2.6 in)
Weight0.37 kg (0.80 lb.)
Battery type4 x AA alkaline IEC LR6
Battery life40 hours
Auto power off20 minutes after non-use
Low battery indicatorPower button light blinks when power is low (typically 85% of capacity depleted)
Operating altitude<2000 m
Electromagnetic environmentEN 61326-1: Portable
Resistance to impact2-meter drop
Warranty3 years

Five essential light testing.

How amazing Fluke tools are? They made a tool that can do all five light tests in one go. Naturally, a device that can do five tests under thirty seconds each is already applaud-worthy. This kind of device is the ultimate showstopper for maintenance men who work for light bulbs. For sure, they will get the job done in no time.

What’s more, a device that can do all in one can ultimately save space in tool bags and can easily be carried when going up and down the stairs. Why carry 3-4 test tools when you can carry one tool that can do more, right?

Here are the five essential light testing that this tool can provide:

  • Lamp test: This allows you to do testing without removing the tube from the ballast. The tester sends a pulse of energy that lights up the tube if there is gas in it. The Fluke Fluorescent tester is compatible with T5, T8, and T12 fluorescent tubes.
  • Ballast test: Effortlessly determine whether the ballast is working.
  • Non-contact voltage test: Quickchecks for the presence of voltage without touching the source.
  • Pin continuity test: Tests whether filaments in the tube have continuity.
  • Ballast-type discriminator: Another one of the best features that this Fluke tool has is that you no longer need to take apart fixtures apart or even climb a ladder. You can easily determine if the ballast is electronic or magnetic from afar. Simply, aim the tester at the ballast from where you’re standing, and it can identify which type you have. This can identify:
  • Old-style
  • Power-hungry magnetic ballasts
  • Maintenance need
  • Replacements

Other useful capabilities:

This Fluke device is built to last so expect durability and at the same time ease of use. Its yellow hard case cover is attractive but easy to maintain and clean. Moreover, as all Fluke tools are known, it features a rugged, extendable all-metal test rod that can be easily replaced should the need arise.

Get your Fluke tool from a trusted source!

Now you are ready to perform tests in under 30 seconds with the use of this prestigious test tool! So why not get it from a trusted distributor in the Philippines? Presidium PH is an authorized distributor of Fluke test tools in Metro Manila. So, if you want to know more about Fuke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools in the market!

Read more

4 Main Causes of Machine Faults

Machines are unpredictable things. It can be working properly and then the next, they can be coughing up oil, making unusual buzzing sounds, or worse, breaking down. This is exactly why having maintenance rounds are especially important to any industrial machine being used to prevent machine faults.

Why do machines develop faults?

Corresponding to any other modern technology in the industry, machines also tend to deteriorate in time. Rapid deterioration usually comes into action when the device or rather, the machine is not well taken care of. That, and a hundred more reasons why your machine is experiencing mechanical faults. But here, we are letting you in on the four main reasons why your machine is malfunctioning.

Yes, there are probably numerous reasons why, but according to a study, these four main categories accept most of them. And here, we will be looking closely at these four categories that are consuming your machine’s health.

Four main causes of machine faults.

These are the most common causes of why your machine is acting up. We are covering four parts which are, misalignment, imbalance, looseness, and bearing time. In the reality of things, do not expect that these causes will be the only cause of machine destruction. As we have mentioned, there are numerous causes of why your machine is experiencing blunders. However, most of those errors are caused by these four things.

1 Machine faults: Misalignment

First, how, and why is this a machine fault? We will give you a straight answer. Misalignment can cause multiple disturbing things when the machine performs. Why? Because this kind of motor error is produced by excessive vibration, noise, coupling, bearing temperature increases, premature bearing, coupling, or shaft failure. Given all those things, machine misalignment is not that hard to miss.

Believe it or not, misalignment also has different types that you need to be aware of in order to fully understand the ins and outs of this categorical machine fault. Let us briefly break it down, shall we? There are three types of motor misalignment.

  • Angular Misalignment – Can cause severe damage to the driven equipment and other motors. This occurs when the motor is set at an angle to the driven equipment.
  • Parallel Misalignment – This occurs when the two shaft centerlines are parallel, but not in the same line.
  • Combination Misalignment – A combination of both parties above. This occurs when angular and parallel misalignment crosses paths, resulting in combination misalignment.

2 Machine faults: Looseness

At first thought, you might immediately think that something in the machine only needs tightening, but let us stop you right there. Looseness can be identified in three things and not just one. And there are levels of seriousness for each.

Type 1: This is when mechanical looseness has a time waveform of 1 pulse per revolution.

Type 2: This is caused by loose pillow block bolts, cracks in the frame structure, or in the bearing pedestal. The time waveform is typically two pulses per revolution.

Type 3: Deemed as the most complex one yet. According to a study, it is generally caused by the improper fit between components parts, such as bearings and their housing, a bearing liner loose in its cap, excessive clearance between a bearing and its sleeve, or a loose impeller on a shaft.

3 Mechanical faults: Imbalance

Also known as an unequal distribution of mass. According to a study by Lewis Motor Repair, balancing is a procedure in which the mass distribution of a rotor is assessed and if necessary, adjusted. Thus, when we say unbalanced, this simply means the unequal distribution of the weight of a rotor about its rotating centerline.

Here are some of the causes:

  • Blow Holes in Castings
  • Distortion
  • Corrosion or Wear
  • Deposit Build-Up
  • Manufactured Unsymmetrical Configurations
  • Hydraulic or Aerodynamic Unbalance

4 Mechanical faults: Bearing wear

It simply means that your mechanical motor is starting to get old. Ultimately, by carrying extensive loads, having poor lubrication or installation, the bearings will eventually fail. However, with the proper care and maintenance, such circumstances can be prevented.

Fluke Vibration Testers are the most ideal tool.

Get your hands on Fluke’s vibration testers. These test tools can undoubtedly be effective in every industrial operation whether it be an official check-up or your daily rounds. The Fluke 810 Vibration Tester is equipped with a diagnostic engine that combines algorithms with a database of real-world measurement experience. This device will allow them to quickly perform vibration analysis and evaluate the motor’s alignment accurately.

This will help every mechanical team in:

  • Prioritizing and planning repair activities and operating more efficiently.
  • Troubleshooting problem equipment and understanding the root cause of failure
  • Anticipate equipment failures before they happen.

Some of Fluke vibration tester’s prized qualities:

  • Comprehensive diagnostic reports and spectral diagrams help confirm data quality and narrow down the root cause of failures
  • Flexible machine speed configurations give the ability to test a broad range of assets including belt drives, gearboxes, and bevel gears
  • Fluke 810’s overall vibration level allows you to quickly assess overall machine health directly from the diagnosis screen
  • Accountability severity scale with four severity levels helps you prioritize maintenance work

Get your Fluke tool from a trusted source!

Presidium.PH is an authorized distributor of Fluke test tools in the Philippines. So, if you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools in the market!

Read more

FieldSense Technology: Creating A Safer Way for Simultaneous Voltage and Current Measurements

Working on electrical wiring and high voltages can be a hazardous undertaking. Although there are preventive measures that one can implement (such as PPE’s and insulated tools) this can only do the bare minimum when you’re under electrical dangers. Luckily, with the innovations of technology, maintenance workers can be more at ease when doing high-risk rounds. By using the new and improved FieldSense technology it can guarantee more safety for the men at work. Its improved functions can attest to this.

However, maintenance professionals are aware of the risks and have undergone preventive training. It’s always preferable to work with tools that can ensure safety and can do the job right. And Fluke tools have just about every unit of these safe and efficient devices that is every maintenance man’s dream tool.

What is FieldSense Technology?

In simple terms, FiledSense Technology is the new and improved way of measuring simultaneous voltage and currents. Basically, the traditional way of measuring such risky parts of a machine or panels is by poking and touching certain parts of the machine that can endanger a man at work. 

However, with the use of FieldSense Technology, it has the capacity to eliminate more risks. Initially, the old way of measuring this is by being in contact with electrical conductors with the use of test leads. This method requires metal-to-metal contact that may carry potential arc flash or electrical shock.

But then again, with the use of this advanced tool, it’s one worry of maintenance and troubleshooting men that they can finally be at peace with.

Safe measurements using FieldSense Technology.

We’re running down facts on how using FieldSense Technology can benefit you on the field. Ultimately, workers (such as commercial and industrial electricians) can use Fieldsense technology for voltage and current measurements, verifying continuity values, and testing individual circuits. However, there is more to this device than just those previously stated.

Aside from its amazing functions, these are some of the things on how this devi9ce can benefit any maintenance or troubleshooting professional on the field.

An option of no metal-to-metal contact

One of the greatest and most favored functions of FieldSense Technology is its ability to measure without metal contact. Unlike most devices that need test probes or alligator clips that need to be connected to the conductor to get accurate readings, FieldSense technology does not require those technicalities.

Basically, in doing so, you are also putting your safety at risk since these kinds of procedures may trigger sparks, arc flashes, or electric shock.

However, by using the new and advanced Fluke FieldSense Technology, you can put yourself at ease since it doesn’t require any contact. This technology allows you to measure ac voltage, current, and frequency through the cable’s insulation by sliding the fork of the tester over the conductor. Therefore, there will be no direct electrical contact with live voltage lessening the risks of dire circumstances.

FieldSense Technology offers more than fault detection.

There will be no shortage of devices that can measure voltage and Fluke tools are one of them. Being recognized as one of the best test tools in the market, Fluke innovates devices to further meet the needs of workers in this continuously advancing world. With this said, Fluke FieldSense offers this kind of innovation by going beyond voltage detection.

Ultimately, this device can also offer to accurately measure the given voltage. Basically, by having this device in your back pocket, you now have voltage detection and a measurement tool, all in one device! Sounds great? There’s more coming! 

FieldSense technology can reduce the need to open panels.

Fluke FieldSense is also known for its fast and easy measurement methods. One of the ways that this device is tagged as a quick measurement tool is because it doesn’t really require you to open any panels. Have the ease to take measurements at any point along the conductor. Technically, you only need to slide its fork-like top to one of the single conducting wires and read the results. Easy and one, two, three!

Take measurements without fussing.

No need to worry about test leads or probes with this one. And when we say you no longer need them, we mean it! FiledSense can still accurately measure voltage without them. What’s cool? Because you no longer need additional accessories for this one, you can have the ability to multitask. Have your FieldSense technology on one hand while doing other priorities on the other.

Its fork-like top can give you the ease of isolating individual hot and neutral wires which in turn helps reduce the chance of accidental contact with another voltage point and the likelihood of errors. Save more time and accomplish more things with this little device!

It promotes proper operation.

Initially, when you’re about to operate on something using any Fluke device a rule of thumb before each operation is making sure that the FLuke device is working smoothly before undergoing any tests. In as much, the FieldSense technology makes sure of this. If you’re a newbie on the field have the habit of testing your device before and after living tests to ensure security and more accurate measurements.   

Get your Fluke tool from a trusted source!

Presidium PH is an authorized distributor of Fluke test tools in the Philippines. So, if you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools in the market!

Read more

Laser Distance Meter 101: Important Facts You Should Know About!

Laser distance meters are extra than just for measurement. We’re talking about innovative tools that can support you in taking precise measurements while also securing a worker’s safety. Laser distance meters take measurement into the modern world wherein you no longer need bulky reel-in tapes or walking wheel distance measurement systems.

What’s new with measurement?

Traditional measurement requires physical contact to know the distance of one point to the other. However, with a laser distance meter, you can achieve accuracy in determining these lengths without contact. In the name itself “laser” this device uses a laser to accurately determine long distances.

Thus laser distance meters are popularly used in different industrial sectors. Here are some of them:

  • Carpentry
  • Masonry
  • Electrical
  • Landscapers
  • Developers
  • Locksmiths

These devices are mostly used but not limited to these types of industries. Then again, one must think, there’s always the trusty and handy measuring tapes which are more affordable so why not use that?

Why you should use a Fluke Laser Distance Meter.

Other than the fact that this product hailed from one of the most distinguished brands for test tools, here are some reasons why you should opt to use a laser distance meter:

  • It’s faster – Point and click! You’ll have results in no time. You’ll get the job done within seconds compared to using a regular tape which eats a lot of minutes just by unrolling it. Not to mention, the use of additional people for you to guarantee accurate results.
  • You don’t need to walk – Unlike regular tape measures which need a lot of movement and effort, laser distance meters only require you to hold one spot in the field and point in the direction you want to measure. Fewer hassles right? 
  • Use it even with poor lighting – The thing with tape measures (or any kind of non-digital measure tool) is that it might be difficult to take data at night or with low lights in general. In totality, the person conducting the measurement might have a hard time navigating in the dark as well. However, with the use of laser distance meters, be able to take measurements more efficiently because of its backlit display.
  • No contact is needed! – You no longer need to poke, jab, or worry about ground obstacles. All you need to do is point it in the right direction and you’ll get the results you need.
  • Measure in all directions even upwards – The most popular measurement we make is the one across something (length or width of something). One downside of using tape is sometimes, it’s not enough in terms of material. But, by using laser distance meters, be confident by measuring in all different directions (across, above, below, sideways, etc.) without moving an inch.  
  • Safety and versatility – You can’t deny the valuable features of the Fluke laser distance meter especially when you’re working in a hazardous environment. Because of its advanced features, workers will no longer undertake risks.

Different applications of laser distance meter.

As we’ve mentioned above, laser distance meters are popular with industrial use but not limited to them. On the contrary, you can actually use this device in a wide variety of things. Here are some of them:

In facilities

  1. Use the laser distance meter in setting up floor supports in large rooms.
  2. Can be used to measure room dimensions to calculate how much paint is needed.
  3. Measure room dimensions to calculate how much floor covering is needed.
  4. Measure height for appropriate ladder selection.
  5. Document the location of standing water or leaks found with a thermal imager or infrared

Measure walls and ceilings

  1. Calculate distances to objects within hard-to-reach drop ceilings to determine overhead cable runs, line of sight.
  2. Measure ceiling height and square feet/meters to determine rod lengths for drop ceiling installation and lighting fixtures.
  3. Measure distance under subfloors or structures for networking or other cable installations.

Safety purposes

  1. Measure distances (including ceiling heights) to install emergency lighting, sprinklers, and fire extinguishers to code.
  2. Determine accurate room dimensions to ensure correct chemical concentration for Clean Agent Fire Suppression system.
  3. Measure distances from machines for safety equipment (fire extinguishers, fire blankets, etc.).

Great features, great performance.

The best Fluke laser distance meters come in two units which are the Fluke 424D Laser Distance Meter and Fluke 417 Laser Distance Meter. Let’s take a closer look at each of them.

Fluke 424 Laser Distance Meter.

This unit is tagged as the most sophisticated measuring tool in the market. It can instantly measure up to 100 meters (330 ft). This unit also features a bright pointer laser that supports laser targeting even at longer distances. Not only that, but the backlit display is also a winning feature of this unit. With its advanced functions, you can ultimately have enough uptime for two people combined.

Fluke 417 Laser Distance Meter.

This unit features durability, accuracy, and ease of use. Designed for both outdoor and indoor use, this will allow you to minimize time spent measuring and maximize the reliability of measurements. This unit also showcases a backlit display and a laser pointer for accurate measurement.

Get your Fluke tool from a trusted source!

Presidium PH is an authorized distributor of Fluke test tools in the Philippines. So, if you want to know more about Fuke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools in the market!

Fluke Laser Distance Meter: https://presidium.ph/?s=laser+distance+meter

Read more

Fluke Test Tools: Recommended Battery Testing to Ensure Optimal Uptime

One of the most important parts of every device is its batteries. Professionals in the industry even advise making rounds on batteries to make sure their performance is at a hundred percent. Although batteries today, are evidently more advanced than the ones before and are often tagged as low maintenance, this doesn’t mean that they should be dismissed. Battery testing is one of the musts that every maintenance man/woman should practice. Ultimately, with the help of Fluke test tools, these devices can ensure battery health with a click of a button.

In light of battery kinds, the most popularly used are the uninterrupted power supply (UPS) and battery backup systems. Again, these types of batteries also hold a reputation for being maintenance-free. However, like all things, in time, these batteries are also susceptible to deteriorate over time. Not only that, but they are also prone to corrosion, internal shorts, sulphation, dry out, and seal failure. And when these issues occur, it will result in frustrating downtimes. 

Determining battery failure.

Voltage usually plays a big role in determining battery health. But, the question remains, is it enough? The answer is no. We’re not saying it’s wrong, but you can do more to ensure that your batteries are in a good state.

In totality, measuring voltage is only the tip of the iceberg. Online monitoring equipment or in-person voltage tests won’t give you the full picture of your battery’s health. This is because the voltage is an indication of your battery’s state of charge and not your battery’s health.

To make it clear, the measuring voltage will not tell you beforehand if your battery is degrading. In line with this, voltage testing also has a drawback when a load is applied.

A recommended approach to battery testing.

Instead of relying on voltage testing, try measuring battery impedance as well. In this way, you’ll have a better understanding of the internal resistance of the battery and not just its state of charge. Basically, if you measure battery impedance, this will give you a whole picture of your battery’s issues.

What is battery impedance and why is it preferred?

Battery impedance is made up of two components. Those are electrical and ohmic resistance. Let’s break them down! First, electrical resistance deals with the current flow in an electrical circuit. Meanwhile, ionic resistance measures current flow due to internal factors such as electrode surface area and electrolyte conductivity.

On the other hand, internal ohmic values or also known as the AC resistance can be a big factor in determining the battery’s overall health. AC resistance can be measured by injecting a small current and then later on calculated using Ohm’s law. But in this case, you might want to consider Fluke test tools for easier and more convenient results.

Measuring battery impedance.

Unlike voltage testing, measuring the impedance values can help you detect potential battery problems in advance. In time, a battery’s internal resistance can increase and when this happens, it means that the battery itself is already on the verge of degradation in the cell.     

The best practice for measuring battery impedance. You must be consistent. A single measurement cannot dictate the entire context of what is happening or what is about to happen with your batteries. Make it a habit to measure impedance over months and years. It also helps to examine changes and don’t forget to put it on record every time you make measurements.

Fluke Test Tools: Fluke Battery Analyzer

The best tool to measure battery impedance is none other than Fluke test tools! Specifically, the Fluke Battery Analyzer. This is the ideal fluke test tool for maintenance, troubleshooting, and performance testing of individual stationary batteries and battery banks used in critical battery backup applications.

As we’ve discussed, one of the key points that need to be measured is internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency, and temperature. With the Fluke Battery Analyzer, you can measure all of these components with just one tool making it a great investment for long-term use!

Get your Fluke tool from a trusted source!

Presidium PH is an authorized distributor of Fluke test tools in the Philippines. So, if you want to know more about Fuke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools in the market! (insert website link battery analyzer)

Read more