, ,

Attending To Power Harmonics With Fluke Tools

Newton’s third law says that for every action, there is an equal and opposite reaction. We are reaping the consequences of the actions of the generation before us. Harmonics has been around for a considerable amount since the introduction of electronic drives for motors, fans, and pumps. Let’s learn more about harmonics and how to address this problem.

What is Harmonics?

Harmonics are the side effects of electronics. These are distortions in the normal electrical current waveform transmitted by non-linear loads. When harmonics are combined with fundamental frequency, this creates distortion in the waveform which causes an adverse effect on your electrical equipment and power lines. Harmonics can be detected by checking these:

1. Load Inventory

2. Transformer Heat Check

3. Transformer secondary current

4. Sub-panel neutral current check

5. Receptacle neutral-to-ground voltage check

Switch-mode power can be seen on electrical devices such as photocopiers, personal computers, laser printers, fax machines, and battery chargers. They are commonly used in supply design because of their ability to supply a fixed voltage output continuously.

Dangers of Power Harmonics

Dealing with electricity can be hard at times because of the dangers it carries with it. There are power systems that can handle a certain level of harmonic currents. But if there is a significant load more than the power system can hold, it can cause errors in communication, overheating, and hardware damage. Here is some hardware damage that can happen:

  • Overheating of electrical distribution equipment, cable, transformers, standby generators, etc.
  • Metering errors
  • Generator failures
  • False tripping of branch circuit breakers
  • Lower system power factor resulting in penalties on monthly utility bills
  • Crest factors and related problems
  • Fires in wiring and distribution systems
  • High voltages and circulating currents caused by harmonic resonance

But these circumstances can be avoided with proper maintenance using dependable maintenance tools.

Solving Power Harmonics with Fluke Tools

To solve your harmonics problem, you can turn to Fluke! Fluke has reliable tools for measuring true-RMS and peak values of the wave shape.

Fluke 87V MAX True-rms Digital Multimeter

It measures true-RMS ac voltage and current of non-linear signals from electrically noisy equipment and variable frequency motor drives or VFDs. This trusted multimeter can work with you in dry, dusty, dark, or wet environments for long days. This rugged multimeter can survive drops up to 13 feet. It provides accurate measurements even within an extreme temperature that ranges from -40 degrees Celsius to +55 degrees Celsius. With a large display of digits, white backlight, and backlit keypad buttons, you won’t have a hard time reading the measurements! Use it for 800 hours

Fluke 87V MAX true-RMS Digital Multimeter. Photo from Fluke.com

Fluke 175 True-rms Digital Multimeter

This multimeter measures the frequency, capacitance, resistance, continuity, and diode. By measuring these, you are tracing the root of the problem. Its Display Hold and Auto Hold helps you capture important events or measurements. The data input is protected by IEN61010-1 CAT IV 600 or V/CAT III 1000 V. UL, CASA, and TUV.

Fluke 175 true-rms Digital Multimeter. Photo Fluke.com

Fluke 289 True-rms Data Logging Multimeter

It is a high-performance industrial logging multimeter of the next generation. This is Fluke Connect compatible which means you can monitor your readings even from afar using iOS or Android smart devices through the Fluke Connect app. It records and saves readings in real-time with a time stamp! It can also save up to 15,000 recorded readings. You can easily hang it because of its magnetic hanger. Thus, giving more room for your hands to move around.

Fluke 289 true-rms Data Logging Multimeter. Photo from Fluke.com

Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex

With a 6 feet cord, you can take readings even when you are in tight spaces. You won’t think about disorganized wires anymore! This ergonomic clamp meter has proprietary inrush measurement technology to filter noise and capture starting currents. The iFLEX Flexible Current Probe has expanded measurement range up to 2500 A AC.

Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex. Photo from Fluke.com

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Sources:

https://www.fluke.com/en-us/learn/blog/power-quality/troubleshooting-power-harmonics

https://www.newark.com/pdfs/techarticles/eaton/Eaton_Technical_Articles/UPS_Training/Powerware_Training/HarmonicsInYourElecSystem.pdf

https://www.electronics-tutorials.ws/accircuits/harmonics.html

https://www.electronics-tutorials.ws/power/switch-mode-power-supply.html

https://www.fluke.com/en-us/product/electrical-testing/digital-multimeters/87v-max

https://www.fluke.com/en-us/product/electrical-testing/digital-multimeters/fluke-175

https://www.fluke.com/en-us/product/electrical-testing/digital-multimeters/fluke-289

https://www.fluke.com/en-us/product/electrical-testing/clamp-meters/fluke-381

Read more
, , ,

How To Prevent Overheating Electrical Panels Using Fluke Tools!

how-to-prevent-overheating-electrical-panels-using-fluke-tools

Let’s give a brief background on why electrical panels are important to every household, or to every establishment in general. This little rectangular box holds the power to every electrical aspect of buildings and houses. We know it can seem a bit intimidating to look at but once you get the hang of it, it’s straightforward. Let’s just say that without electrical panels, you won’t be able to have control over electricity in certain areas of your home (if you’re a homeowner) or establishment (if you’re a maintenance professional).

Whether it be on buildings, homes, industrial plants, or in any area that requires electrical power, they will never be alive without electrical panels. So, regarding their importance, what would now happen if you had a faulty electrical panel in your midst, or worse, an overheating one? Here’s how you can resolve them with early detection using Fluke tools!

Reasons for overheating electrical panels

Initial, don’t be confused. All electrical panels may feel a bit warm since electrical currents run through them. There is a difference between a warm electrical panel and an overheating one. Remember, each circuit breaker is assigned to one current flow. Take a house, for example, one current flow (that is aligned to a breaker) may be connected to the bedroom, another can be connected to the kitchen, and so on.

Take note that circuit breakers also have ratings. So, if it exceeds that rating, it will also be a cause of a warm-up. However, these are not the only reasons why your panels are heating up. Here are some more probable reasons why they are overheating…

It might be a case of a loose connection.

Watch out for loose connections as this can generate heat. Loose connections often happen with the breakers. You see, when installing these little switches inside the electrical panel, you need to make sure that it is secured with the clip that holds them to the bus bar. If all else fails, maybe you need to bring out your screwdriver and tighten the lug that holds the breaker.

Current limits may also be in the works.

Keep in mind that electrical panels consist of multiple currents in different breakers, therefore, when one of those currents exceeds their rating then there might be a “trip” to the current flow breaking electricity. This can be a cause of power-hungry appliances. And, more often than not, when such appliances are often turned on and off, this can cause distress on your breaker. A simple solution would be to reset it. Switch it off, and switch it back on.

Faulty breakers also make electrical panels to overheat.

How do you know if one of your breakers is bad? An indication can be flickering lights or if your power is not working continuously in certain areas of your place. These are some of the signs that you have a bad breaker on your hands. If in such circumstances you’ve had your breakers replaced and are still experiencing the same thing, then it might be high time to upgrade to a modern panel.

Fluke tools to use for preventive measures and safety.

The iconic yellow holstered tools are a phenomenon in the industrial department. They are the best test tools that are highly recommended by professionals and maintenance men/women alike. They are not only known for their safe testing features but they are also well-applauded for their accurate performance. People working with Fluke tools in hand can operate more confidently, quickly, and safely, especially when working on highly sensitive projects. But that’s not all, Fluke tools are also praised because they can prevent all kinds of faults from a wide variety of tools, machines, electrical equipment, and even devices.

Considering preventing the overheating of electrical panels, Fluke tools can play a big role in determining faults in advance. Considering that most of these faults cannot be seen by our own eyes and might be too dangerous for us to inspect by hand, Fluke tool comes to the rescue with its high-performing tools. Here are some of the Fluke tools that can be an asset in the preventive maintenance of overheating electrical panels…

  1. Fluke Insulation Testers – They can be efficient in measuring phase-to-phase or phase-to-neutral voltage.
  2. Fluke Clamp Meters – They are good for measuring currents and looking for current harmonics.
  3. Fluke Energy Analyzers – These Fluke tools are great for monitoring voltage, harmonics, and load.
  4. Fluke Thermal Imagers – The preferred tools for spotting hot and cold spots.
  5. Fluke 1735 Three-Phase Powe Logger – They are great for measuring currents.
  6. Fluke 1587 Insulation Multimeter – They are perfect for measuring voltage and voltage drops.
  7. Fluke Insulated Tools – If you need to tighten bolts, make sure to use insulated tools for extra safety from harmful electricity.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Sources:

Read more

Best Fluke Tools For Power Monitoring

Electricity is inarguably one of the most important energy forms in the world. From bulbs to phones, to computers, to cars, electricity is needed to keep them going. However, electricity can be very dangerous when mishandled and not properly stored. Regular power monitoring is necessary to keep everyone safe from any risk an electrical malfunction may pose.

What is Power Monitoring?

Power Monitoring is the process of measuring power consumption for energy-saving purposes. It is essential in preventing your devices from malfunctioning. It also minimizes the risk of encountering an event that is potentially life-threatening. Accurate and regular power monitoring can be achieved by using the best Fluke power monitors, sensors, and meters.

Benefits of Power Monitoring Using Fluke

1) Identify defects early on.

As they say, prevention is better than cure. It also applies to our devices. Early problem detection gives us time to prepare and mitigate the potential large-scale damage it could lead to.

2) Increase the life of the equipment.

Understanding the capacity of equipment will help the operators create an accurate load profile for every piece of equipment and proactively manage and allocate energy load. This helps in utilizing the equipment to reach its highest level of performance while avoiding overloading.

3) Save time and money.

These two are commodities no one wants to waste. In businesses, when you misuse time, you are also wasting money! These essential commodities are greatly affected once a business encounters a problem in power consumption and management. Instead of waiting for your equipment to break down and your business to have downtime, it is wiser to invest in power monitoring systems.

4) Increase profit.

Cutting operation costs will increase the profit of the business. Instead of experiencing downtime, focus on having reliable energy and power management system that will help grow your business faster.

5) Ensure personnel safety.

It is equally important to keep businesses running. Taking care of them is investing in the future of the business. Faulty equipment poses more danger to the operators. Power monitoring helps in making sure that there are no irregularities in the processes and that your business won’t blow up in ways you wouldn’t want to.

Best Fluke tools for Power Monitoring

Since electricity is invisible, instruments are the only way to measure it. However, it can be dangerous to measure that’s why you need reliable power monitoring tools. Are you looking for one? Fluke is known to deliver excellent maintenance needs for our devices! Look at the list of Fluke tools best for power monitoring.

Fluke 3540 FC Three Phase Power Monitor and Condition Kit

Real-time monitoring of historical power variable data and other electrical variable fluctuations can be done by this Fluke device wirelessly. It has internal storage enough for 1 week worth of data. It allows users to visually analyze data with software trending, graphing, and timeboxing.

Fluke 3540 FC Three Phase Power Monitor and Condition Kit. Photo from Fluke.com

Fluke 1734 Three Phase Electrical Energy Power Logger

Receiving the highest safety rating in the industry, this Fluke device helps you identify the source of electrical energy waste and overloaded circuits. This builds an image of energy usage which can be used in reducing energy waste and making important decisions regarding power consumption.

Fluke 1734 Three Phase Electrical Energy Power Logger. Photo from Fluke.com

Fluke 1748 Three Phase Power Quality Logger

Accurately measure harmonics and interharmonics of voltage and current with this Fluke tool. You can export data in PQDIF or NeQual compatible through a third party software installed in Fluke 1748 Power Logger. Also, this compact power logger that is compliant with international power quality standards and combined with Energy Analyze Software is able to analyze power quality with waveform data to help identify the root of all disruptions.

Fluke 1748 Three Phase Power Quality Logger. Photo from Fluke.com

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila. Get to know more about these products: https://presidium.ph/shop/?wlfilter=1&product_cat=fluke-power-quality-analyzers.

Sources

https://www.fluke.com/en/products/condition-monitoring/power

https://www.fluke.com/en-ph/product/electrical-testing/power-quality/1742-1746-1748

https://www.fluke.com/en-ph/product/electrical-testing/power-quality/1732-1734

https://www.fluke.com/en/product/condition-monitoring/power/3540-power-monitor-sensor

http://hoveyelectric.com/hovey-electric-power-blog/bid/70348/What-Is-A-Power-Monitoring-System

https://www.automationworld.com/home/blog/13318206/5-reasons-to-consider-a-power-monitoring-system

https://www.vertiv.com/en-asia/about/news-and-insights/articles/educational-articles/what-is-power-monitoring-and-why-does-it-matter/

Read more

How To Deal with Faulty Electrical Circuits?

how-to-deal-with-faulty-electrical-circuits

Electrical circuits are the main foundation for transmitting electric currents. To give you a brief background, an electrical circuit is a device that gives energy to charged particles constituting the current. These are one of the main parts of every device, generators, lamps, electric motors, computers, etc. Think of it this way, without electrical circuits, your electrical devices will never power up. That’s why it’s also essential to always protect them and care for them.

How do we protect electrical circuits?

A car cannot run without its batteries, and motors cannot work without their electrical circuits. So, like any vital part of electric equipment, they also need extra care, but the question is, how do we do that? There are a number of things that we can consider to protect our electrical circuits. Here are some of them according to Elprocus.

  • Fuse
  • Circuit Breaker
  • PolySwitch
  • RCCB
  • Metal Oxide Varistor
  • Inrush Current Limiter
  • Gas Discharge Tube
  • Spark Gap
  • Lightning Arrester

These are some of the things that can protect your electrical circuits to ensure that there are no faults plaguing their systems.

What happens if you have defective electrical circuits?

When this happens, you’ll know a hundred percent as your device or any electrical device for that matter, will not function. As we’ve mentioned above, the main purpose of electrical circuits is to distribute power to your motors. If they are somehow damaged, then expect possible downtimes. Worst case scenario? Faulty electrical circuits may also be dangerous to people nearby.

Defective electrical circuits are prone to damaging insulation, conductors, and equipment, and they are also prone to overheating. In such cases that faulty electrical circuits are not dealt with immediately, they can also cause fires, explosions, arc flashes, and arc blasts. These are one of the most dangerous scenarios that personnel can ever encounter.

Staying safe with the use of Fluke tools.

You can never see faults coming with the use of your naked eyes for the simple reason that it’s impossible! Luckily, Fluke tools can make the impossible, possible with their state-of-the-art maintenance tools. If you want to prevent these faults from happening, you might want to consider using the best-performing Fluke tools.

The Fluke Power Quality Analyzers can do wonders in detecting faulty electronic wiring that might harm your devices in the long run. And yes, it can also be an efficient tool in determining faulty electrical circuits. These tools can…

  • Calculate mechanical power and efficiency without mechanical sensors.
  • Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion, and unbalance.
  • Identify power quality issues such as dips, swells, transients, harmonics, and unbalance.
  • Includes full power quality and electrical energy analyzer functionality
  • Highest safety rating in the industry; 1000 V CAT III / 600 V CAT IV

This is just a jist of the wonders that a Fluke Power Quality Analyzer possesses. But, the best way to deal with faulty electric circuits is to identify them early on rather than waiting for some malfunction to happen to your machines. Remember, prevention is better than cure (especially when you’re dealing with expensive electronic devices!).

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Read more

Importance Of Measuring True RMS

Electricity is an exact science. One miscalculation may lead to a catastrophe. Thus, it is important to measure it all regularly and accurately. We need the accurate measurement of the current to indicate the amount of the load and the condition of the load. Let’s learn about True RMS and how is it beneficial to us.

Dangers of miscalculating or not measuring True RMS

True RMS is the average of the set of values in which we measure alternating current. True RMS is helpful in giving us an idea of the capacity of the appliances when we plug them in. It is important to note the voltage needed by an appliance to work and the current capacity of the outlet. They must fit each other to avoid problems. Measuring the True RMS will also allow us to maintain our electricity sources.

Overheating of devices.

Overheating is caused by going beyond the capacity that a device can hold. Most of the time, overloaded circuits cause this. You might smell something burning, or see smoke, or worst case – fire.

 Here are tips to avoid overheating.

A.1. Do not use too many power strips.

A.2. Check your wiring.

A.3. Check your appliances too.

A.4. Find the source of your problem.

Malfunction of devices.

When the device does not receive the True RMS value it needs to function, it won’t work. For example, suppose a refrigerator needs 220 V of electricity. And you plug it in a source whose RMS is only 110 V. It does not contain enough current to power keep the refrigerator going.

How do you avoid these dangers?

Accidents do happen, yes. But you can act before it happens! Here is a list of safety precautions you must do to avoid the dangers mentioned above.

  1. Have your devices checked regularly. It is important to maintain your devices to monitor their conditions. Early problem detection is the key to avoiding further damage. Addressing the problem right away will help you find a solution right away.
  2. Stick to the calculated True RMS of the devices. Do not attempt to go beyond or under the True RMS measurement of your device. Sticking to the True RMS value will ensure that your device will work properly and will last you a long time.
  3. Do not overuse your devices. Everything gets worn out if it is used continuously without any break. Let your devices rest too.
  4. Do not use worn-out cords. Worn-out cords can expose the live wire which can be extremely dangerous to come in contact with. Either you get electrocuted, or you set fire.
  5. Do not leave your devices plugged in when not in use. These devices must rest too. When they are not used, the plug can still release a certain amount of heat. And it might cause the device to overheat.

 What Fluke devices to use to measure True RMS?


 Ever wondered which tools will help you measure the True RMS? Here is a list of Fluke Tools for you! Known for its accuracy and reliability, Fluke Tools ensure the safety of your place. Here are some of the Fluke tools that will help you with your RMS concern.

1. Fluke 179 Digital Multimeter

This digital multimeter has manual and automatic ranging. It can measure 1000 volts of AC (Alternating Current) and DC (Direct Current). This robust, fast and accurate multimeter has a backlit digital display with an analog bar graph and built-in temperature measurements and thermocouple!

Fluke 179. Photo from Fluke.com

2.  Fluke 117 Electrician’s Multimeter with Non-Contact Voltage

This compact True RMS digital multimeter is made for electricians. Its non-contact feature keeps you safe when detecting True RMS. Designed to be carried anywhere from commercial buildings to hospitals and even schools! This compact multimeter provides measurements for resistance, continuity, frequency, and capacitance.

Fluke 117. Photo from Fluke.com

3. Fluke 120B Series Industrial Scope Meter handheld Oscilloscopes

This oscilloscope and multimeter have connect and view trigger for hands-off operation. This device simplifies testing but gives you more information about your device.

Fluke 120B. Photo from Fluke.com

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Sources:

https://www.fluke.com/en-ph/product/electrical-testing/portable-oscilloscopes/120b

https://www.fluke.com/en-ph/product/electrical-testing/digital-multimeters/fluke-179

https://www.fluke.com/en-ph/product/electrical-testing/digital-multimeters/fluke-117

https://www.fluke.com/en-ph/learn/blog/electrical/what-is-true-rms

https://www.artplumbingandac.com/electrical/why-is-my-electrical-outlet-warm/#:~:text=The%20most%20likely%20problem%20causing,heat%20in%20an%20electrical%20outlet.

https://yeobuild.com.sg/tips-how-to-avoid-appliance-overheating/

https://www.fluke.com/en-ph/learn/blog/electrical/what-is-current#:~:text=Amperage%20measurements%20are%20normally%20taken,to%20cause%20electrons%20to%20move.

Read more
, , , , , ,

Maintenance Management is Keeping the World Up and Running (Here’s Why!)

maintenance-management-is-keeping-the-world-up-and-running

Going the extra mile to make sure your machines and devices are running smoothly can reap rewards in the long run. Many don’t know it, but maintenance management is a key factor in helping keep the industry up and operating. Without daily maintenance checks, a lot of machines and devices may be susceptible to faults and other malfunctions. This alone might negatively impact the productivity of workers and put a wedge on their day-to-day processes.

Just imagine if important assets suddenly shut down. Take the internet as an example. Nowadays, if your internet provider experiences any hiccups, a whole population is affected by it, with their work, school, entertainment, and a lot of other things. It’s quite obvious that people hate experiencing downtimes.

This also applies to valuable assets. Unwanted machine/device breakdowns are unforgivable especially if you need to meet certain schedules or if the machine on hand is responsible for providing power. Technically, this only highlights how important maintenance management is especially if we’re living in a machine-dependent economy. So, let’s go in-depth into just how maintenance management keeps the world up and running and how we benefit from it.

Why everyone should practice maintenance management.

Maintenance management deals with caring about the performance of every industrial tool, device, or machine. Remember, no matter how high-end your device is, it will always be susceptible to faults. Having maintenance management in your protocols can not only help with machine health but it can also be of advantage to the people working with the machines.

Having maintenance management can benefit you in these ways:

  • Longevity of the machine/device – If you do daily maintenance checks, you can easily spot possible faults that might occur. This will also save you from costly repairs.
  • It will keep the workplace a healthier environment – A well-conditioned machine keeps the workers around it more confident and assured that there won’t be any unwanted surprises.
  • Improves efficiency – if your tools are well-maintained, this will allow them to be more efficient and reliable. Accurate data and such can be expected from them.
  • Will be cost efficient – If your tools are working well, then there’s no use to spend on replacements. Whereas when you’re handling a machine that’s practically breaking down, then expect a lot of costly repairs to be made.

How efficient Fluke tools are for maintenance management?

We’re talking about the best of the best. Fluke tools are the most reliable tools for maintenance. Professionals, men, and women who work in the maintenance field prefer to have Fluke tools by their sides when doing maintenance rounds. Why? These tools aren’t just ahead of their time, but they also ensure every worker’s safety on the field. Here are the top reasons why you should have fluke tools with you during maintenance management…

  • They allow you to take measurements from afar so you don’t have to risk your safety by having close proximity to malfunctioning machines or devices.
  • Fluke can see what the naked eye cannot – they can spot possible faults that may occur.
  • These tools can also give a diagnosis of what you should do once a fault is spotted.
  • They can give and send real-time results.
  • Some Fluke features 2 or more functions in one. 
  • They encourage wireless testing.
  • Fluke instruments help to eradicate the drastic costs attributed to manual errors.

The best maintenance practice you can apply?

Do them as often as you can. If you have reliable Fluke tools by your side, why not test and test your equipment and machines as often as you can? The key to working closely with sensitive (but important) assets is to never be complacent with them. Usually, the best assets are also the costliest ones, and Fluke corporation understands this dilemma. Therefore, they built the best tools for the job.

So, as much as possible, the best maintenance management practice that is applicable anywhere and everywhere is to always evaluate your equipment are often as possible. Therefore, most maintenance men and women on the job roam around with a device in hand. Trust us when we say you will rarely see one without a testing tool with them. This is because most Fluke tools are not even that big that it becomes a nuisance to bring along. Most of them fit right in your pocket! So yes, they are not only dependable, but they are best for hand carry tools.

Going back… So how does maintenance management keep the world up and running again?

By simply taking care of the machines and equipment that makes the world go round of course! One of the main goals of maintenance management is to make sure that everything is working in its tippy-top condition. Living in a machine-generated world, this process speaks of significant importance every day. Add in Fluke tools in the picture, and we are pretty sure that things can last a bit longer.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Read more
, , , ,

The Difference Between Absolute Accuracy and Relative Accuracy

the-difference-between-absolute accuracy-and-relative-accuracy

These types of accuracy are commonly found in IR thermometers. So, when you have one, knowing the difference between absolute accuracy and relative accuracy will come in handy one way or another. So, first things first, what’s the catch between accuracy and IR thermometers? Don’t get us wrong, Fluke’s IR thermometers do not come short when it comes to performance, but rather, you would want to take note of a few extra tips to ensure accuracy in all operations using IR Thermometers.

This is applicable in different sectors.

Accuracy is of vital importance when it comes to any testing and maintenance operation. IR thermometers can be used in building automobiles, electrical components, processing food, and maintaining electrical systems. Using an IR thermometer can be quite beneficial for these types of projects and proves to be a safe and effective way to accurately inspect any electrical, electronic, and mechanical work.

Trust that these are the tools that can do the job well when it comes to sensing even the most subtle temperature differences that can break any of your machines and devices. What’s amazing about them is that it also promises workers safe troubleshooting and maintenance rounds by letting you test from a safe distance. So, if you’re testing hot, hazardous, or even moving targets, you’ll have the confidence to do tests without worrying about getting injured.

The two basic types of accuracy in IR Thermometers.

There are two types of accuracy related to infrared thermometers, and that is absolute accuracy and relative accuracy. Both entail a proper understanding of the ins and outs of an IR thermometer and of course, proper calibration. However, let’s get into the deep end of each to exactly know how they work.

Both relative and absolute accuracy works together. Relative accuracy only deals with certain operations. If the temperature of the target is not in comparison to the rest of the machine this entails relative accuracy. Ideally, this takes place when you’re testing or inspecting electrical and electromechanical systems, building envelopes, and circuit boards. Let’s take circuit boards as an example. When you find that one part of the component is hot then it might be an indication of an overload. Then again, if it shows that it’s cold, then you might be dealing with a failure. See how it only affects a part of the component but not a whole?

On the other hand, to achieve absolute accuracy, your tool needs to undergo proper calibration. Unlike relative accuracy, which deals with the action of testing and maintenance, absolute accuracy deals with your Fluke tool’s performance and how well it can produce results. Of course, there are certain precautions for you to get it right, but nonetheless, without proper and daily calibration, your IR thermometer might not produce on-point results.

Remember, that Fluke tools are also prone to deterioration and depending on how you care for them, they also have the tendency to decrease in performance which is why calibration is very important for Fluke tools.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Read more
, ,

Top 3 Tools for Electrical Safety Testing

top-3-tools-for-electrical-safety-testing

You do not need a lot of tools and devices by your side with false promises of safety. Fluke tools are a pioneer in the industry because of their proven and tested ways to ensure worker safety during risky operations. When you are frequently exposed to dangerous electric materials and machines, these are the ideal tools for you to take. These three tools are the holy grail of ensuring safety and security in every operation.

What type of tool can ensure safety and security?

The type of tool that you want with you all the time are tools that can let you measure without any sort of contact. As much as possible, the safest way to do maintenance and test checks is within a safe distance. Insulated tools, PPE, and rubber soles can only do so much when you are up against powerful arc flashes and a faulty machine that can seriously damage your body.

Besides having a tool that can efficiently measure from afar, you also need a device that can accurately give you results. Therefore, Fluke tools are the ideal tools for the job. Fluke tools can give you the duality of safely testing faulty equipment and electric material within a safe distance, and at the same time, can give you an accurate and timely diagnosis.

The top three tools that can guarantee safe electrical testing…

As we have mentioned, you do not need a lot of tools to take with you to guarantee safety, you just need to take the right ones. These top three tools can give you electrical safety that is even better than bringing a whole toolbox with you. Considered the big three Fluke tools, the non-contact voltage testers, electrical testers, and digital multimeters will undoubtedly make every difference.

1) Fluke Non-Contact Voltage Tester…

This is a handy tool that is small enough to fit in your pockets. Its main function is detecting the presence of voltage with failed or malfunctioning assets. So, if ever you encounter one, the best tool that can give you the most accurate results is a non-contact voltage tester.

These tools can sense even the smallest amount of voltage current. The built-in sensor at the tip of the device lights up red (and waits for it to beep) this indicates that voltage is present in the material. What is great with this tool is you do not even need contact for it to work, and that alone is added safety for all workers already.

But beware, according to an official Fluke source, non-contact voltage testers can give a false negative indication (meaning it does not light up) when these instances occur…

  • The insulated test point touches grounded metal.
  • The cable being evaluated is partially buried.
  • The user is isolated from the ground.
  • It is used inside a metal enclosure.
  • Proximity testers also will not detect the presence of voltage through the shield on the shielded cable. To better understand why proximity testers, have these limitations, read the Fluke application note on the subject, “Understanding capacitive voltage sensors.” The key word is “proximity.”

2) Fluke Digital Multimeter

A great weapon of choice when you are evaluating any kind of electricity either for faults or simply doing maintenance rounds. These tools can multitask a lot and get plenty of testing done with just one device! Its testing capabilities do not just focus on one but feel free to evaluate voltmeters, ammeters, and ohmmeters as well.

Multimeters fall into one of a handful of categories:

  • General-purpose (aka Testers)
  • Standard
  • Advanced
  • Compact
  • Wireless

3) Fluke Vibration Testers

Every maintenance professional takes pride in having a Fluke Vibration Tester. Already tagged as the best and most advanced troubleshooting tool for mechanical maintenance. The device uses a special diagnosis technology that helps you immediately identify mechanical faults and prevent downtime and drastic measures to occur.

This device lets you…

  • Quickly analyze machine health.
  • Let us observe the severity of the faults.
  • It features enhanced reporting.
  • Gives you suggestions to solve the current machine situation.
  • Let us address critical problems in real-time.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Read more

The Importance of Monitoring Power Consumption

the-importance-of-monitoring-power-consumption

Do not take your power consumption for granted. Logging and keeping track of energy saved and wasted proves important when managing large facilities. So what does it entail? Energy monitoring is the process of tracking, recording, and visualizing energy consumption, which can be across an entire facility or right down to an asset. Yes, that is how thorough the process can be.

Benefits of monitoring power consumption with Fluke power loggers.

Monitoring power consumption is of vital importance in every facility. Electrical power can be so available and so easily consumed that we tend to abuse it sometimes. In return, it abuses our machines and our costs as well. Therefore, keeping one eye on daily power consumption can be beneficial to future uses in such a time when important energy management decisions are needed to be made. Here are more of its benefits and why you should monitor power consumption daily.

Monitoring power consumption can give accurate measurements.

Monitoring power consumption also entails being accurate in utility bills. And when you are running huge facilities, you would want those reports on point. Sadly, one thing that it will not tell you is sudden shoot-ups in costs. Therefore monitoring power consumption comes in handy since it can give you accurate measurements when it comes to billing.

Monitoring power consumption can let you identify issues in advance.

If you are consistent in monitoring your power consumption, it can have an effective impact in terms of equipment performance. Fluke tools can immediately recognize when assets, tools, and utility machines are not operating efficiently. Spotting these faults right away can have loads of benefits in return since faulty machines tend to consume power more (and not in a good way).

It applies to real-time monitoring.

What’s more efficient than real-time monitoring? Real-time monitoring can be done with the use of Fluke tools. It’s better to have data on machines as soon as they break down rather than leaving it behind and waiting for experts to examine them. With Fluke tools, you will be able to know what’s wrong in a matter of seconds!

Moreover, if daily monitoring takes place, it can also act as predictive maintenance for all machines. This will reap rewards in the future since it will promise fewer failures which will entail little to no downtime.

Why fluke power quality logger is the best bet.

With the use of the Fluke power logger, you can be able to assess and properly address power problems that are plaguing your facilities or specific machines that also need power monitoring. By doing so, you will be able to keep track as to which areas your energy power is tripping.

The Fluke power logger can automatically capture and log voltage, current, power, harmonics, and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles. In other words, it will be able to successfully troubleshoot power quality issues with ease.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Shop Now: https://presidium.ph/shop/?wlfilter=1&product_cat=fluke-power-quality-analyzers

Read more

Evaluating Humidity Using Fluke Tools

evaluating-humidity-using-fluke-tools

Humidity is terrible for your tools and equipment. To give you a brief idea, humidity is simply known as “warm air” since it pertains to the amount of water vapor in the air. If there is a lot of water vapor in the air, the humidity will be high. And certainly, with most tools and equipment, it is in their nature to have lower performance under such circumstances. Going back, this is where evaluating humidity comes in. Exposing your tools to too much humidity may damage them completely. Therefore, temperatures are set in factories and in some facilities. Therefore, having your room humidity in check can benefit your tools in terms of caring for them.

Do not forget to use Fluke tools!

But first, what better tool to evaluate humidity than the rugged Fluke tool itself? Fluke tools are one of the most trusted test devices in the industrial field. These tools can accurately give you data to let you determine machine faults with a simple click of buttons. More than that, it can also give workers the best possible protection from dangers by letting them measure within a distance. Convenient, right?

How humidity can damage tools.

Humidity can cause several devices to quickly be susceptible to faults. Humidity can encourage tools to condense and corrode on metallic parts of your rotating machines and devices. Depending on the placement of your tools, dust can also be a harmful factor when you plan to keep your tools in shape. Plus, humidity, leaves the air thick and hot. Even people do not enjoy being in humid places, what more for our tools and devices?

Other than that, humidity also discourages tools and machines to cool down. And if your tools do not cool down, it might affect their performance drastically. Here are the other factors that your electronics (or things in general) might experience when exposed to too much humidity…

  • Rust
  • Mold
  • Mildew
  • Rot
  • Decay
  • Warping
  • Stretching
  • Lumping
  • Caking
  • Agglomeration
  • Decomposition

And these are some of the devastating consequences you might face when you leave your devices in a room with too much moisture.

The solution to humidity?

Particularly good air conditioning is a vital part of keeping your tools in their optimum health. One way of determining good air in the room in a way that is safe for tools is having a good working air conditioner. Looking back, most HVAC professionals are not even using technology to identify underlying faults in the air. They use a sling psychrometer and a psychrometric chart which can be heavy on the eyes!

However, in the modern times that we live in today, most professionals now opt to use a Fluke 971 Temperature Humidity Meter. Not only does it give real-time results, but it can also give maintenance men little to no downtime. What is more, this tool can measure wet bulb temperature and dew point temperature, psychrometric points that are essential for HVAC evaluations and diagnostics. Here is a short description for each…

  • Wet-bulb – This pertains to the total heat in the air. This represents the cooling effect of evaporating water, the temperature of the air will cool when water evaporates into unsaturated air.
  • Dew point – This is also known as the temperature under which water will condense out of the air.
  • Relative humidity – Ratio of water vapor pressure (amount currently in the air) to the saturation vapor pressure (the amount the air can hold) at a given air temperature.

It is an all-in-one tool for you to determine the optimal performance of the air in the room to make your tools (and people) at a comfortable temperature.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

SHOP NOW; https://presidium.ph/product/fluke-971-temperature-humidity-meter/

Read more