Fluorescent Light Tester: 5 Essential Light Tests Under 30 Seconds

Light is an essential part of life. It is used in houses, commercial areas, schools, and other places that we frequent as well. The sheer importance of it in our day-to-day activities makes it a point that it is also important to make sure they are functioning well. This makes the Fluke Fluorescent Light Tester a definite must-have for commercial maintenance people.

This test tool can perform five essential light tests in under 30 seconds! Come to think of it, if you are working in a big establishment with a lot of fluorescent lights, the Fluke Fluorescent Light Tester might just be the most ideal tool for you.

What are fluorescent lights?

Fluorescent light is one of the utmost versatile lightings that is used in commercial areas such as shopping malls, schools, grocery shops, offices, convenience stores, etc. You can find it anywhere and everywhere you go. As to why it is popularly saturated, it is a type of light that is known to be energy efficient. Not only that, but it has a lower price than LED lights.

What does a Fluorescent Light Tester Do?

If you’re working in an industrial department with a lot of fluorescent light, then you might want to consider having a Fluke Fluorescent Light Tester. One of the main functions of this tool is that it saves time and energy for the people involved. Imagine having to check fluorescent lights one by one without an advanced test device. You will be burning time, energy, and money by doing so.

The greatest thing about Fluke Flourescent Light Testers? It will enable you to do five essential light tests in under thirty seconds. What seems like what needs to be done in at least an hour or 30 mins for each light is reduced to thirty seconds. Amazing right? Let us take a closer look. Here are the specifications of the Fluke Fluorescent Light Tester:

General Specifications
Lamp test max output3000 V peak
Ballast test20 kHz
Ballast type discriminator≤3m (10 feet) distance
Pin continuity test< 1 kΩ
NCV (VoltAlert™)85 to 400 V AC45 a 67 Hz≤10 cm (4 in) distance
Environmental Specifications
TemperatureOperating: -10 °C to +50 °C (14 °F to +122 °F)Storage: -40 °C to +60 °C (-40 °F to +140 °F)
Relative humidity85% maximum
Safety Specifications
Safety ratingIEC 61010-1, pollution degree 2
Mechanical and General Specifications
Size21.5 cm x 3.0 cm x 6.5 cm (8.5 x 1.2 x 2.6 in)
Weight0.37 kg (0.80 lb.)
Battery type4 x AA alkaline IEC LR6
Battery life40 hours
Auto power off20 minutes after non-use
Low battery indicatorPower button light blinks when power is low (typically 85% of capacity depleted)
Operating altitude<2000 m
Electromagnetic environmentEN 61326-1: Portable
Resistance to impact2-meter drop
Warranty3 years

Five essential light testing.

How amazing Fluke tools are? They made a tool that can do all five light tests in one go. Naturally, a device that can do five tests under thirty seconds each is already applaud-worthy. This kind of device is the ultimate showstopper for maintenance men who work for light bulbs. For sure, they will get the job done in no time.

What’s more, a device that can do all in one can ultimately save space in tool bags and can easily be carried when going up and down the stairs. Why carry 3-4 test tools when you can carry one tool that can do more, right?

Here are the five essential light testing that this tool can provide:

  • Lamp test: This allows you to do testing without removing the tube from the ballast. The tester sends a pulse of energy that lights up the tube if there is gas in it. The Fluke Fluorescent tester is compatible with T5, T8, and T12 fluorescent tubes.
  • Ballast test: Effortlessly determine whether the ballast is working.
  • Non-contact voltage test: Quickchecks for the presence of voltage without touching the source.
  • Pin continuity test: Tests whether filaments in the tube have continuity.
  • Ballast-type discriminator: Another one of the best features that this Fluke tool has is that you no longer need to take apart fixtures apart or even climb a ladder. You can easily determine if the ballast is electronic or magnetic from afar. Simply, aim the tester at the ballast from where you’re standing, and it can identify which type you have. This can identify:
  • Old-style
  • Power-hungry magnetic ballasts
  • Maintenance need
  • Replacements

Other useful capabilities:

This Fluke device is built to last so expect durability and at the same time ease of use. Its yellow hard case cover is attractive but easy to maintain and clean. Moreover, as all Fluke tools are known, it features a rugged, extendable all-metal test rod that can be easily replaced should the need arise.

Get your Fluke tool from a trusted source!

Now you are ready to perform tests in under 30 seconds with the use of this prestigious test tool! So why not get it from a trusted distributor in the Philippines? Presidium PH is an authorized distributor of Fluke test tools in Metro Manila. So, if you want to know more about Fuke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools in the market!

Read more

How Fluke is Innovating Predictive and Prescriptive Maintenance for Food and Beverage Companies

The food and beverage industries have always become a prominent part of our society as it is producing something that we consume every day. With this said, as much as possible, issues and downtimes must be kept to a minimum (or if attainable, none at all). It is a given fact that a prominent part of the production goes to machines and without proper maintenance of these machines, it’s definitely going to leave a dent production-wise. As luck would have it, Fluke tools are innovating predictive and prescriptive maintenance for food and beverage companies everywhere.

Why do food and beverage industries need PMDB and prescriptive maintenance?

According to the president and founder of Eagle Technology Inc, Harshad Shah, states the importance of being able to be on top of technology maintenance specifically in the food and beverage industries.

 “…its benefits include reduction or near elimination of unscheduled equipment downtime caused by equipment or system failure; increased labor utilization; increased production capacity; reduced maintenance costs; and increased equipment lifespan. “Predictive maintenance ensures that production equipment doesn’t fall below prescribed performance, quality, and safety standards,” he shares.

The benefits of using Fluke in food and beverage companies.

A rugged tool that promises safety and security to its users. Fluke is already known to maintenance industries because of its ability to perform fast and thorough tests. But that is not all the advantages it gives to maintenance people. Here are more advantages of using fluke tools.

  • Quick tests and measurements.
  • Safety and reliability.
  • Ease of use.
  • Versatile – You not only get one function in one tool, but it is applicable in a lot of areas when it comes to prescriptive, and predictive maintenance.
  • Be hassle free when it comes to getting data.
  • Prevents downtimes.
  • Maximizes productivity by seeing faults before they happen.
  • Have the confidence to take it in the most rugged environments.

And that’s just scratching the surface. Ideally, you will get a lot more advantages once you identify what Fluke tool you need. Each tool boasts special qualities that will undoubtedly provide you optimum experience in each operation.  

How is Fluke innovating predictive and prescriptive maintenance?

According to an article from Food Engineering written by Sharon Spielman, Fluke tools are making good rounds in the food and beverage industries in terms of keeping machines in pristine working condition. It was praised for its ability to see issues easily and give immediate solutions, making them the most advanced test tool of this day.

Fluke tools are advanced in a way that…

  • The device is known for its statement of “doing it fast and doing it safe.” Fluke tools offer a direct approach in prescribing the correct action plan to take when dealing with machine issues.
  • Fluke gives a performance that never falters (just make sure you take care of them too). It is the perfect tool for inspecting and maintaining power distribution and industrial high voltage equipment.
  • It lets you diagnose problems at a safe distance. We cannot reiterate enough that Fluke makes sure to let you feel that you are the most important asset on the job. Therefore, it lets you operate in hazardous environments without getting close to them.
  • Fluke lets you maximize on your mobility. Use less of bothersome wires and accessories when working with Fluke tools. Therefore, this lets you focus on the issues found and action plans to take.

In truth, not all test devices can readily provide such functions plus topping it off with keeping workers safe. Therefore, in the food and beverage industry, such a device is considered golden.

Ideally, these are the top bets of why maintenance people prefer to collaborate with Fluke tools. 

Words from Fluke’s product application specialist, Michael Wilson.

Michael Wilson shares the importance of having a strong PdM strategy. He told us that one of its huge benefits is time. In his interview with Food Engineering, he said, “Technician time, time for managers. With PdM technologies, unplanned events are minimized and the team is allowed to work to the plan.” The product specialist continued by also explaining the importance of extracting data, “Utilizing data to determine when to perform maintenance on an asset allows the work to be planned and provides safer work for the technician, lower expediting for the procurement and planning teams.” With this said, all follow-through in terms of reassuring quality and compliance when the right predictive and prescriptive methods are done.

Resolve these failures using Fluke Tools!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines.

Prevent future faults from penetrating your machines by using the best test tools there are! If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Read more

Top 13 Causes of Rotating Motor Failure from Lowest to Highest

The number one priority of maintenance men is to focus on machine faults, errors, or defects and stop them before they even happen. After diagnosing the machine, they will then settle on the most suitable tool to get the job done.

However, considering rotating machines, things can always get a tad bit tricky. These kinds of machines are prone to imbalance, looseness, misalignment, and wear. Naturally, the best way to deal with them is by having regular checkups with the most trusted test tool in the industrial department, and those are Fluke test tools.

But first, here is the top thirteen causes of motor failure…

Motors are saturated everywhere especially in industrial departments. However, over time, these motors are also prone to malfunction and eventually slow down. Naturally, they become more complex and technical which may prove to be a challenge for maintenance men to fix without the right tools. Let us delve into the top thirteen causes of motor failure for better understanding.

Rotating Motor Failure: Power Quality

  • Transient voltage

The impact? Motor winding insulation. Technically, it is going to break down leads that will lead to motor failure and will eventually lead to long downtimes.

Criticality status – High

  • Voltage imbalance

The impact? This will create an excessive current flow. It will impact one or more phases that will increase operating temperatures. In the end, it will lead to insulation breakdown.

Criticality status – Medium

  • Harmonic distortion

The impact? Briefly, what happens is a decrease in motor efficiency. You see, harmonic distortion is additional energy that is used in the motor shaft. However, this kind of energy also contributes to internal energy losses that are bad for the machine. It can come in the form of heat and over time will cause deterioration of the insulation of the windings.

Criticality status – Medium

Rotating Motor Failure: Variable Frequency Drives

  • Reflections on drive output PWM signals

The impact? Motor winding insulation breakdown. This is also the works of impedance mismatches that root out from improper installation, improper component selection, or equipment degradation over time.

Criticality status – High

  • Sigma current

The impact? Mysterious circuit trip caused by protective earth current flow.

Criticality status – Low

  • Operational overloads

The impact?  This might do permanent failure to your machine since it causes premature wear on motor electrical and mechanical components.

Criticality status – High

Rotating Motor Failure: Mechanical Faults

  • Misalignment

The impact? There are three types of misalignments that could occur. This is angular misalignment, parallel misalignment, and compound misalignment. All of which leads to premature wear in mechanical drive components.

Criticality status – High

  • Shaft imbalance

The impact? This may be caused by a lot of factors such as dust accumulation, missing balance weights, manufacturing variations, and a lot more. This will result in premature wear in mechanical drive components and total mechanical failure.

Criticality status – High

  • Shaft looseness

The impact? You see, a looseness that is caused by the actual rotation might stem out from excessive clearance between rotating and stationary elements. This can also result in premature wear and failure.

Criticality status – High

  • Bearing wear

The impact? Remember that this can also cause by several things. These are:

  • A heavier load than designed for
  • Inadequate or incorrect lubrication
  • Ineffective bearing sealing
  • Shaft misalignment
  • Incorrect fit
  • Normal wear
  • Induced shaft voltages

Ultimately, accelerated wear on rotating components can result in bearing failure.

Criticality status – High

Rotating Motor Failure: Improper Installation Factors

  • Soft foot

The impact? There are two types of “soft foot” that you need to know about. There is a parallel soft foot and angular soft foot. Parallel soft foot takes place when one of the mounting feet is higher than the other three. Meanwhile, angular soft foot happens when one of the mounting feet is not parallel or “normal” to the mounting surface. But in totality, it heavily makes an impact on the misalignment of mechanical drive components.

Criticality status – Medium

  • Pipe strain

The impact? This will generally put a strain on rotating components and will cause shaft misalignments. Naturally, this will also result in premature failures.

Criticality status – Low

  • Shaft voltage

The impact? Arcing across bearing surfaces create pitting and fluting resulting in excessive vibration and eventual bearing failure

Criticality status – High

Resolve these failures using Fluke Tools!

Hey, we made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your rotating machines? Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your rotating machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Read more

Importance of Maintaining Battery Backup Systems

Come to think of it, can you imagine an airport without electricity, a shopping mall without lights, or hospitals without functioning technology? Just the thought of it is disastrous in it itself. Moreover, this just shows how reliant we are on electric power and how we depend on them on a day-to-day basis. Big and important establishments depend on electricity every day, and when that electricity goes out, it comes to the battery backup systems.

What are battery backup systems?

Along with battery backup systems come uninterrupted power supplies and a string of batteries. Technically, they are what we turn on when everything is down. But, nevertheless, this doesn’t mean that they are not susceptible to corrosion, deterioration, internal short circuits, sulphation, dry-out, and seal failures.

Safe to say, they are our second line of defense when an outage occurs. Naturally, when you keep your battery backup systems in shape, you’ll be prepared to turn the power back on immediately until stable power comes through.

Industries banking on backup systems.

So, earlier, we’ve mentioned big industries that benefit from having backup systems, they’re actually not the only ones. In short, there are a hundred industries that bank on this power to fuel their day-to-day operations when actual power distributors experience faulty systems.

Here are some of them:

  • Hospitals
  • Medical centers
  • Electronics manufacturers
  • Data and call centers
  • Banks
  • TV stations
  • Production-based manufacturers
  • Telecommunications and cable companies
  • Universities
  • Utility companies
  • Restaurants
  • Shopping centers
  • Airlines

Common reasons for power loss.

There are certain circumstances that are completely out of our hands that cause power loss and in return, urge the use of battery backup systems. Although few of these situations are rare, they can still take place at any moment. Moreover, according to Constellation, these are the top 10 reasons for power loss:

  • Severe weather
  • Natural disasters
  • Motor vehicle accidents near power lines
  • Equipment failure
  • Fallen trees
  • Wildlife interference
  • Hight energy demand
  • Power line damage from construction work
  • Damage from the public
  • Cyberattacks
  • Planned power outages

Main types of battery backup systems.

According to Warren CAT, there are three types of battery backup systems. These are the standard UPS, line-interactive UPS, and double conversion UPS. Usually, bigger battery backup systems include switchgear and a power transformer to provide consistent and reliable electricity. Having this kind of technology can guarantee fewer downtimes in a year, it’s actually possible to have a few to none at all.

Let’s take a closer look at the three types of battery backup systems:

  • Standby UPS system – It normally has an inverter, battery, static switch, low-pass filter, and surge suppressor. Basically, the system remains on standby unless there’s a primary power failure.
  • Line-interactive UPS system – Contains a battery and inverter that are always connected to the output, and if power fails, a switch changes the electrical flow. Furthermore, the continuous connection provides superior filtering.
  • Double-conversion UPS system – Additionally, this device has a backup battery that is charged by the input AC and powers the output inverter for a seamless switch.

The Fluke tool that’s perfect for battery backup maintenance.

The most ideal tool for maintaining battery backup is Fluke Battery Testers. Moreover, as stated in their official site, here are some of Fluke Battery Tester’s best key features:

Battery Voltage

Initially, during the internal resistance test, Fluke Battery Analyzers also measure the voltage of the battery under test.

Discharge Volts

The Discharge mode collects the voltage of each battery multiple times at a user-defined interval during a discharge or load test. Users can calculate the time a battery takes to drop to the cut-off voltage and use this time to determine the capacity loss of the battery.

Ripple Voltage Test

Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits. ultimately, it allows users to test ac components in dc charging circuits and find one of the root causes of battery deterioration.

Meter and Sequence Modes

Likewise, you can save and read the readings in a measurement or time sequence. On the other hand, the sequence mode is for maintenance tasks with multiple power systems and battery strings.

Threshold and Warning

Users can configure a maximum of 10 sets of thresholds and receive a Pass/ Warning/ Fail indication after each measurement.

Intercell Strap Resistance Test and Data Management

Measures the resistance of the intercell connection between batteries in a string.

AutoHold

When AutoHold is turned on, a reading is captured when it remains stable for 1 second. The reading is then released when a new measurement starts.

AutoSave

When AutoSave is turned on, measured values are saved to internal memory automatically after an AutoHold reading is captured.

Fluke Battery Management Software

Meanwhile, easily import data from the Product to a PC. The measurement data and battery profile information is stored and archived with the Management Software and can be used for comparison and trend analysis. All measurement data, battery profile, and analysis information can be used to easily generate reports.

Comprehensive logging

All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on-the-go analysis.

Optimized user interface – Quick, guided setup ensures you’re capturing the right data every time.

Battery life – 7.4 V 3000 mAh lithium-ion battery for more than eight hours continuous operation.

USB port – Meanwhile, for fast data download to supplied data analysis and report management application software.

Highest safety rating in the industry – CAT III 600 V, 1000 V dc max. rated for safe measurements all around the battery power supply equipment.

Get your Fluke tool from a trusted source!

Hey, we made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your UPS? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. So, if you want to know more about Fluke tools and their functions, visit our website for more info!

Read more

Fluke Thermal Cameras: How Wind Affects Thermal Reading

Thermal energy can be found all around us. Even our own bodies emanate hot and cold energy and that also goes for our surroundings. If you think of it, thermal cameras (or imagers) are actually one of the most sophisticated devices we have in terms of troubleshooting. Honestly, this device shows actual heat on the screen! That alone says a lot about technology advancement. Wait till you learn more about Fluke Thermal Cameras, but we’ll get to this a bit later.

Nevertheless, things are not always a hundred percent with thermal cameras (or any other device in general). This is because surrounding elements can always affect readings. And when the man in charge is not aware of the possible elements that can affect outputs, and this will cause inaccurate data.

How does wind affect readings?

It all goes down to understanding the basic principle of heat transfer. You see, thermal energy varies from hot to cold (or vice versa) which is the basic principle of temperature. This is so unless another force comes in between that process and alters it completely. And when we say “another force” this means the wind. Yes, the wind is a viable candidate for temperatures to be manipulated. As a result, this can alter a surface’s temperature.

On the other hand, when you use a thermal camera to inspect an object (whether it’s on the inside or outside) you also need to take your environment into consideration. In line with this, there is a thing such as forced convection. Forced convection is a form of heat transfer that comes from wind, fans, pumps, suction devices, etc. Basically, these are elements that have the ability to change your target temperature. 

A deeper understanding of forced convection.

Think of it this way, if you make hot tea it is already a given that it’s not going to stay hot for quite some time. This is because heat tends to get lost in the surroundings. Technically, forced convection is the interruption of external aspects turning originally hot objects into cooler ones or vice versa.

There are actually two types of convection you must know about. One of them is forced and the other is natural. To briefly explain the two elements, forced convection (as we’ve mentioned above) is caused by objects. But on the matter of natural convection, this is actually influenced by the natural flow of things. Some examples of this are the sea breeze and land breeze.

Wind can cause a change in reading.

Don’t be alarmed, we’re not talking about drastic changes but yes, there is change when the wind is applied to readings. So it’s safe to say that if you want accurate readings on your data, best have a wind meter handy. However, if you don’t have a wind meter on hand, there is actually another way of determining which kind of wind you are dealing with.

But first, you must know and understand the Beaufort Scale. To put it lightly, the Beaufort Scale is a scale of the wind speed based on visual estimation of the wind’s effects from zero to twelve. Here’s a chart according to the Royal Meteorological Society.

Beaufort Scale

ForceSpeed (mph)Description
0<1Calm
11-3Light air
24-7Light breeze
38-12Gentle breeze
413-18Moderate breeze
519-24Fresh breeze
625-31Strong breeze
732-38Near gale
839-46Gale
947-54Strong gale
1055-63Storm
1164-72Violent storm
1273+Hurricane

Environmental adjustments you can tweak.

Realistically speaking, you cannot make tweaks or adjust every inspection environment you enter! Such a thing is not always doable. Nevertheless, what you can make up for it though is to be prepared. Here is something thing you can do!

During an indoor inspection, air conditioning and other HVAC appliances may have an effect on readings. The best way to prevent forced convection is by turning off the HVAC system before performing any operation.

With outdoor windy environments, however, unless you can control the weather and stop the wind, it might be trickier than usual. But the best way to go about this is to examine older data, inspect the machine thoroughly, and adjust settings accordingly.

About Fluke Thermal Cameras…

Fluke Thermal Cameras actually has advanced features than most. But be aware that there are also different kinds of them with slightly different functions. However, like any other thermal camera, each unit will let you take quality thermal readings with the following functions:

  • Continuous touchscreen IR-Fusion
  • 5 hours battery life.
  • Can withstand drop up to 2 meters.
  • Water and dust resistance. IP54 enclosure rating.
  • Automatically organize and file thermal images with Fluke Connect.
  • 120 x 90 infrared resolution.

But in totality, whatever thermal camera you choose can benefit you and your work greatly, no doubt!

Here are some of its advantages for you:

  • Can collect data in hazardous environments from a safe distance.
  • Scanning large areas such as walls, ceilings, and roofs quickly.
  • Gathering data without disrupting production.
  • Quickly identifying irregularities in specific locations.
  • Detecting problems before failure.

Get your Fluke tool from a trusted source!

Presidium PH is an authorized distributor of Fluke test tools in the Philippines. So, if you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools in the market!

Read more

4 Main Causes of Machine Faults

Machines are unpredictable things. It can be working properly and then the next, they can be coughing up oil, making unusual buzzing sounds, or worse, breaking down. This is exactly why having maintenance rounds are especially important to any industrial machine being used to prevent machine faults.

Why do machines develop faults?

Corresponding to any other modern technology in the industry, machines also tend to deteriorate in time. Rapid deterioration usually comes into action when the device or rather, the machine is not well taken care of. That, and a hundred more reasons why your machine is experiencing mechanical faults. But here, we are letting you in on the four main reasons why your machine is malfunctioning.

Yes, there are probably numerous reasons why, but according to a study, these four main categories accept most of them. And here, we will be looking closely at these four categories that are consuming your machine’s health.

Four main causes of machine faults.

These are the most common causes of why your machine is acting up. We are covering four parts which are, misalignment, imbalance, looseness, and bearing time. In the reality of things, do not expect that these causes will be the only cause of machine destruction. As we have mentioned, there are numerous causes of why your machine is experiencing blunders. However, most of those errors are caused by these four things.

1 Machine faults: Misalignment

First, how, and why is this a machine fault? We will give you a straight answer. Misalignment can cause multiple disturbing things when the machine performs. Why? Because this kind of motor error is produced by excessive vibration, noise, coupling, bearing temperature increases, premature bearing, coupling, or shaft failure. Given all those things, machine misalignment is not that hard to miss.

Believe it or not, misalignment also has different types that you need to be aware of in order to fully understand the ins and outs of this categorical machine fault. Let us briefly break it down, shall we? There are three types of motor misalignment.

  • Angular Misalignment – Can cause severe damage to the driven equipment and other motors. This occurs when the motor is set at an angle to the driven equipment.
  • Parallel Misalignment – This occurs when the two shaft centerlines are parallel, but not in the same line.
  • Combination Misalignment – A combination of both parties above. This occurs when angular and parallel misalignment crosses paths, resulting in combination misalignment.

2 Machine faults: Looseness

At first thought, you might immediately think that something in the machine only needs tightening, but let us stop you right there. Looseness can be identified in three things and not just one. And there are levels of seriousness for each.

Type 1: This is when mechanical looseness has a time waveform of 1 pulse per revolution.

Type 2: This is caused by loose pillow block bolts, cracks in the frame structure, or in the bearing pedestal. The time waveform is typically two pulses per revolution.

Type 3: Deemed as the most complex one yet. According to a study, it is generally caused by the improper fit between components parts, such as bearings and their housing, a bearing liner loose in its cap, excessive clearance between a bearing and its sleeve, or a loose impeller on a shaft.

3 Mechanical faults: Imbalance

Also known as an unequal distribution of mass. According to a study by Lewis Motor Repair, balancing is a procedure in which the mass distribution of a rotor is assessed and if necessary, adjusted. Thus, when we say unbalanced, this simply means the unequal distribution of the weight of a rotor about its rotating centerline.

Here are some of the causes:

  • Blow Holes in Castings
  • Distortion
  • Corrosion or Wear
  • Deposit Build-Up
  • Manufactured Unsymmetrical Configurations
  • Hydraulic or Aerodynamic Unbalance

4 Mechanical faults: Bearing wear

It simply means that your mechanical motor is starting to get old. Ultimately, by carrying extensive loads, having poor lubrication or installation, the bearings will eventually fail. However, with the proper care and maintenance, such circumstances can be prevented.

Fluke Vibration Testers are the most ideal tool.

Get your hands on Fluke’s vibration testers. These test tools can undoubtedly be effective in every industrial operation whether it be an official check-up or your daily rounds. The Fluke 810 Vibration Tester is equipped with a diagnostic engine that combines algorithms with a database of real-world measurement experience. This device will allow them to quickly perform vibration analysis and evaluate the motor’s alignment accurately.

This will help every mechanical team in:

  • Prioritizing and planning repair activities and operating more efficiently.
  • Troubleshooting problem equipment and understanding the root cause of failure
  • Anticipate equipment failures before they happen.

Some of Fluke vibration tester’s prized qualities:

  • Comprehensive diagnostic reports and spectral diagrams help confirm data quality and narrow down the root cause of failures
  • Flexible machine speed configurations give the ability to test a broad range of assets including belt drives, gearboxes, and bevel gears
  • Fluke 810’s overall vibration level allows you to quickly assess overall machine health directly from the diagnosis screen
  • Accountability severity scale with four severity levels helps you prioritize maintenance work

Get your Fluke tool from a trusted source!

Presidium.PH is an authorized distributor of Fluke test tools in the Philippines. So, if you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools in the market!

Read more

Fluke Tools: How to Properly Clean Your Device

The growth of the pandemic has affected a lot of lives in terms of lifestyle and preventive health measures. New procedures were taken to ensure the safety of everyone. Most especially, new rules have been implemented to contain the spread of the virus. In lieu of this, one of the best practices everyone was taught was to keep our hands clean and disinfect gadgets.

With Fluke tools, no matter how rugged and durable fluke tools are, they are not susceptible to not inhabit any form of the virus.

With this said, now that society is slowly going back to normal, this doesn’t mean we should tolerate complacency. Normal processing of these health procedures should still be implemented especially in public places.

In an operational situation, or most especially, in work wherein touching things or being close to people is a must, hand hygiene, and device hygiene is a must. One of the most prominent working places that this usually happens is in industrial work areas.

Industrial work areas: What to expect?

Let’s just say working in the industrial sector is not a one-man job. Rather, it requires a lot of communication and teamwork. Furthermore, it also includes a lot of touching. Maybe not with your pals at work, but with your tools. And this can cause serious trouble to your workmates if one of the people touching that device is Covid positive. Scary right?

The passing of tools and data is not uncommon in a rugged environment. But to this day and age, it is also not deemed as the safest. Yes, the rates of Covid-19 cases have slowed down, but this doesn’t mean preventive measures should also slow down.

Caring for your Fluke tools.

Fluke tools are the best in the market, yes? Their reputation of being one of the most rugged tools in the industry is clear as daylight. This is why they are saturated by maintenance and troubleshooting professionals.

However, this doesn’t negate the fact that they also need a lot of caring and maintenance, specifically for the fact that they can be used in such harsh environments. Luckily for you, we’re here to show you how.

The role and importance of cleaning your devices.

According to WHO (World Health Organization), one of the most efficient ways how the virus jumps from one person to the next is in the form of touch. As stated by the University of Washington, cleaning removes most germs, as well as dirt and debris from surfaces or objects.

Ultimately, it was also mentioned in the study that the outer membrane of SARS-CoV-2, the virus that causes COVID-19, can be physically degraded by surfactants contained in all EPA-approved cleaning agents.

As you can see, properly cleaning your devices the proper way can boost workplace safety up a notch. Not only does this practice benefits your Fluke tools, but it also greatly benefits the people around you.

How you should properly clean Fluke tools.

To recall, the exterior of Fluke devices sports a yellow and grey hardcover. And with its ability to withstand harsh elements, let’s just say you shouldn’t go easy on it when you’re in the process of cleaning. Nevertheless, there is still a proper way to do it. Here’s how:

  • Use clean cloths – Really, if you’re going to use discarded scraps of old cloth, then why are we cleaning it in the first place? Using clean cloths can eliminate germs, bacteria, debris, dust, and dirt. On the other hand, if you’re using used cloths, then, there is a high chance you’re just spreading the dirt and not actually cleaning your device.
  • Use a Fluke Meter Cleaning wipe – Yes, ladies and gents, Fluke has an official cleaning wipe for its devices. It comes in a box and consists of black wipes. It is equipped with a pre-moistened industrial strength cleaning formula that removes surface dirt, oil, and grease from your test tools.
  • Dry your equipment after cleaning – Because let’s face it, every electronic thing on the planet whether it’s a high-end device or a state-of-the-art tech, each one of them hates water. They can tolerate yes, but initially, there’s a chance of cutting their lifespan short when they are exposed to any form of water.

Here’s what you shouldn’t do.

Now you know how to properly clean your Fluke test tools, now, we’ll show you what you shouldn’t do! Here are some of them:

  • Don’t use abrasive cleaners – These are scrubs, stones, liquid cleansers, powdered cleansers, etc. For the simple fact that it’s too strong of a cleaning solution for your device.
  • Do not immerse tools in liquid – Your Fluke tools might be dirtier than expected, but do not put them underwater. Stick to the wiping procedure above.

Get your Fluke tool from a trusted source!

Now that you know how to properly clean your Fluke tool, why not get them from a trusted distributor? Presidium PH is an authorized distributor of Fluke test tools in the Philippines. So, if you want to know more about Fuke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools in the market!

Read more

Fluke Insulated Hand Tools: The Difference Between Regular Hand Tools and Insulated Hand Tools

One of the things that partner up well with cutting-edge Fluke devices is their Fluke Insulated Hand Tools. These are tools that should always be present in a maintenance professional’s belt. Fluke devices are tagged as one of the best in the market, for being effective, reliable, and with their iconic ruggedness. However, it wouldn’t hurt to have hand tools that can boost any professional’s performance.

Ultimately, Fluke devices give a quality performance in detecting faults. However, after issues with machines are detected, it is now the maintenance men at work who now hold the spotlight. When actual wire adjustments or issues with screws take place, this is where hand tools or insulated hand tools come in.

What are hand tools?

Once it is manually operated by hand that does not include any electricity, it is automatically considered as a hand tool. Every craftsman or a person who is fond of DIY projects should not be a stranger to these kinds of tools.

Basic hand tools used in construction or maintenance:

  • A set of pliers – Mostly used for maintenance purposes. These tools usually come as a set. Pliers are good for twisting wires, cutting wires, or gripping circular objects steadily.
  • Hammers – One of the popular tools in construction projects, they are usually used to hammer nails in place. They are used in projects such as assembling furniture, framing, shaping metals, and so on.
  • A set of screwdrivers – Similar with hammers, screwdrivers also put in screws. However, they don’t put it the same way a hammer does. Instead, they will put it in a turning moting to secure the screw.
  • Wrench – Can also come as a set. Wrenches are good for gripping, fastening, turning, tightening and loosening things like pipes, pipe fittings, nuts and bolts.
  • Saws – Preferrably made to cut out wood, metal, or stone because of its chisled edges.

These are usually the most basic hand tools that you would find in any handyman’s toolbox. Better yet, it is also the tools that we keep in storage in our homes in such cases when there’s a maintenance emergency.

There are two types of tools, a hand tool, and a power tool.

You must be wondering what’s the difference between them. It’s actually pretty simple. While hand tools rely on men to make them function, power tools come to life with the use of electricity. Power tools are considered to be the most advanced tools in the industry since they feature multiple functions in one tool. Moreover, they also save time and can produce outstanding results in return. Nevertheless, some professionals still opt to use trusty hand tools to get the job done.

Examples of power tools:

  • Power saws
  • Chainsaws
  • Power sanders
  • Power drills
  • Air compressor

Regular hand tools Vs. insulated hand tools.

We’ll get straight to the point. Yes, using insulated hand tools is much better than plain hand tools. But keep in mind that it will still depend on the hand tool’s usage and the project itself. In light of the usage of maintenance professionals, however, it will be beneficial for them to make use of insulated hand tools rather than plain ones. This is not because of the latest technology, but it’s actually for safety purposes.

Moreover, it is critical for a person working with electricity to know the difference between both since protecting yourself from possible hazardous voltages should be your number one priority. Genuine protection from electric shock goes beyond rubber slippers and personal protective equipment. So, if you have tools to help you be safe, better take advantage of them than be sorry.

In contrast, if you are not a maintenance professional and are only working on DIY projects that do not include encounters with live high voltage wires, a regular hand tool can already do the project justice.

Additionally, regular hand tools have nylon or plastic handles which cannot protect you from electric shocks if ever you encounter cutting live wires. On the other hand, Fluke Insulated Hand Tools are equipped to protect the man on the job if ever he encounters cutting live high voltage wires since it has electrical isolation on the handles.

Fluke insulated tools that should be in every maintenance man’s belt:

  • Diagonal cutter
  • Screwdriver kit
  • Pump pliers
  • Long nose plier
  • Combination pliers
  • Philip screwdriver (IPHS1 and IPHS2)

The importance and safety of using Fluke Insulated Hand Tools

It is undeniable that there are certain features that insulated hand tools have that regular one does not. And if you’re working in an environment where you are exposed to electricity on a daily basis, safety must be your number one priority. When dealing or working with live wires and high voltage electricity, your tools or devices will be your first line of defense.

Ultimately, the use of high-end devices should capture faults and issues in advance. Meanwhile, hand tools serve as the first contact with the troubled machine when it comes to troubleshooting. This is why when you ask every maintenance, HVAC, and utility professional, they would prefer to use insulated hand tools while performing their tasks.  

Notable safety measures of Fluke Insulated Hand Tools:

  • Have confidence in troubleshooting high voltage equipment without worrying about shocks.
  • Will reduce the possibility of arc faults caused by short circuits.
  • Can block potential hazardous voltages.
  • These tools underwent stringent testing to make sure tools are equipped to withstand hard use, extreme temperatures, and even live flame.
  • Designed to lessen strain and adapt to your hand.
  • Features a slim build that lets you easily access jammed junction boxes and panels.

The iconic Fluke reputation will truly exceed expectations. So, get yours now from a trusted distributor:

Read more