, , , ,

The Importance Of Electrical Grounding

the-importance-of-electrical-grounding

What is electrical grounding?

Indeed, people have made notable advancements in the electricity department and electrical grounding is one of its big improvements. Technically, electrical grounding is storing electricity on the ground to prevent fatal risks from occurring. It is the process of connecting electrical panels, electrical motors, installations, electrical controls, etc, to the earth. As a result, this will make the environment safer for people since it reduces dangers from civilians and equipment.

What happens if I do not do electrical grounding?

You will be exposed to fatal shocks if your currents are not grounded. So, there are three things about wiring that you need to know about. Ideally, there is an active wire, a neutral wire, and a grounding wire. So, let us look at each one of them closely.

An active wire is the one that supplies power to the wires. Meanwhile, the neutral wire is the one that carries the current back. Lastly, the grounding wire is the one that can be attached to outlets as well as other electrical devices to be connected to the ground at the breaker box.

Originally, the grounding wire is only an additional feature. However, regardless of their “newness” grounding wires holds the most advantageous feature for people since it gives them complete protection from fatal shocks. The grounding wires work for electrical current to safely return to the ground.

As a result, if a short circuit did occur the current would flow through the ground wire causing a blown fuse or tripped circuit breaker. Better a blown fuse or a tripped circuit breaker than a fatal shock, right?

Benefits of proper grounding

Let us face it. Grounding is also one of the most overlooked aspects when it comes to electrical wiring. Nevertheless, according to Platinum Electricians, grounding your wires is an ideal choice to provide protection against possible shocks. They explained. “Grounding your electrical system is a smart and effortless way to make it a whole lot safer, as well as to protect against the very real possibility of having to deal with fluctuations in power supply.”

Just imagine if an electrical error occurs such as lightning strikes or power surges. When you have no electrical grounding, this will cause metal components to function as conductive surfaces. Therefore, these surfaces become electrically energized. And when people touch these surfaces, they will get shocked in the process.

Platinum Electricians further explained by saying, “If you want to safeguard all of your important assets, whether at home or at the office, as well as a lookout for the health and safety of everyone around you, find out if your electrical system is grounded”.”

Advantages of proper grounding according to Conserve Online:

  • Eliminates shock hazard
  • Protects equipment from voltage
  • Prevents electrical fires
  • Reduces equipment repair cost and downtime
  • Lowers levels of electrical noise (fluctuations in an electrical signal)

Why do you need electrical grounding

Not only does it bring notable safety benefits for people and their equipment, but it also brings a lot to the table overall. So, if you do not want your electricity grounded, you might want to think again. Take note of these four significant reasons why you should.

  • Electrical grounding protects against electrical overloads.
  • It stabilizes voltage levels
  • Earth conducts with least resistance
  • It prevents severe damage and death

Resolve these failures using Fluke Tools!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

List of Fluke models: https://presidium.ph/earth-ground-testers/

Read more
, , , , , ,

All You Need To Know About Non-Contact Voltage Testers

all-you-need-to-know-about-non-contact-voltage-testers-presidium-ph

Being one of the sought-after tools in the market, Fluke’s non-contact devices take center stage. Fluke being able to create tools that can help workers take tests and measurements from a safe distance is one of its defining features. Expect that almost half of the test tools will have this winning function.

On the other hand, non-contact voltage testers don’t stray far from its family of digital multimeters. Only this time, they offer a more direct approach to detecting voltages. Not to mention, they are also very handy in terms of sizes. Here, we will be discussing all you need to know about them!

What is a Non-Contact Voltage Tester?

For staff in the electrical, industrial, and maintenance departments, this is a huge sigh of relief. Gone are the days of hesitant testing and risking people’s safety. To put it plainly, non-contact voltage testers are used to see if the voltage is present or not. Additionally, this tool can also detect mis wires of electrical outlets.

This portable tool is very well-liked for its simple and quick approach to see if the harmful voltage is taking place within your outlets or electrical panels. What is better? It does not entail a lot of buttons pushing or navigating, but it is mostly favored by maintenance people for its direct approach.

Choosing the right Non-Contact Voltage Tester for you.

There are diverse types of non-voltage testers. It’s best if you assess the operations, you usually do before purchasing a non-contact voltage tester to make the most out of it. Plus, keep value in mind when looking at non-contact voltage tester prices and remember that the best price does not necessarily equal the best value. With this said, take note of these Fluke non-contact voltage testers to determine the one for you.

Fluke 1AC II VoltAlert™ Non-Contact Voltage Detector

The Fluke 1AC II Volt Alert is perfect if you need a high-performing tool for general voltage detection. Uneasy leaving tools to shut down on its own? This non-voltage detector comes with an on/off switch of your convenience.

Here are more of its notable capabilities:

  • Voltage range: 90 V to 1000 V AC
  • Voltbeat™ technology and continuous self-test — so you always know it is working
  • Voltage indication: tip glows and beeper sounds (beeper can be disabled)
  • Safety: CAT IV 1000 V
  • On-off switch for maximum battery life

Fluke 2AC VoltAlert™ Non-Contact Voltage Detector

The Fluke 2AC Volt Alert is perfect for people who usually work in environments wherein sight indication is more preferred than sound. If you are a person who’s always on the go and needs a ready stead voltage detector, then the Fluke 2AC VoltAlert is the one for you. Although it still does feature audio beep voltage indicators, so technically speaking it’s just a tad bit more advanced than Fluke 1AC considering its extra features.

Here are more of its notable capabilities:

  • 90 V to 1000 V AC voltage range
  • Voltage indication: tip glows
  • Voltage indication: audio beeper for quiet environments
  • Safety: CAT IV 1000 V
  • Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready
  • ‘Battery Check’ function ensures battery is in good condition

How do non-contact voltage testers work?

As we’ve mentioned, it is very simple and direct. Just touch the tip of your non-contact voltage tester to an electrical strip and wait for a beeping sound. Also, watch if the point turns either red or green. Red light indicates that high voltage is present while a green light tells that the wire does not harbor any dangerous voltages.

Here are things you should also remember when operating a non-contact voltage tester…

  • The tip glows red and a beeper sounds when voltage is detected
  • A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
  • Optionally, the beeper can be disabled for use in quiet environments
  • Continuous self-test so you always know it is working
  • When the tip blinks red you know it is working properly
  • Provides a continual visual indication that the 1AC II is on
  • 90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use.
  • Wide voltage detection range allows for use in a broad range of applications
  • Also available in a low voltage model from 20 V to 90 V AC for controls circuits

Can I get shocked while using a voltage tester?

We know, it is the complete irony for a device to be called “non-contact” and still require contact when being used. However, if your concern is getting shocked then let us put you at ease. Fluke specializes in making tools that prevent workers from getting hurt, and this does not leave out the Fluke voltage testers. 

Considering shocks, make sure that you are using and holding your voltage tester properly. Doing so will shield you from shocks. Only hold them on the insulated handle when you are undergoing an operation.

Okay, so we’ve touched up where to hold your voltage tester. Now, let us talk about watching where you are placing your other free hand. Make sure that it is not touching something that will expose you to live currents still (if ever the insulation fails).

Another word of advice, never undergo testing without wearing the proper personal protective equipment. Tools are just covering one part in protecting you from electrocution but having your PPE will provide you the complete safety and confidence you need when you’re working with these kinds of projects.

Some non-contact voltage testers can show a false positive or negative if…

Environmental factors can play a key role in getting accurate data from test tools. These are things that you need to consider, and from time to time, adjust to. Like all tools alike, the non-contact voltage tester is not different. At times, the device may show false positive or negative results. This is why it is especially important for you and your safety to take note of what is causing them for prevention purposes.

Reasons for false positive or negative:

  • The insulated test point touches grounded metal
  • The cable being evaluated is partially buried
  • The user is isolated from ground
  • The tester is used inside a metal enclosure
  • The cable is shielded
  • The battery is dead

The difference from other non-contact Fluke devices.

Fluke’s main priority is developing test tools that will keep workers and maintenance people safe in every operation. And to this day, they have kept their promise of providing workers the best test tools there are. This superbly handy non-contact voltage tester, however, differs from most since, well, it is smaller with more direct functions. No need to press a lot of buttons, no complicated navigation, and you will not even spend time reading the manual for this one. That is one of the winning factors of this test tool.

Purchase from an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines.

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Fluke 1AC: https://presidium.ph/product/fluke-1ac-a1-ii-non-contact-voltage-tester/

Fluke 2AC: https://presidium.ph/product/fluke-2ac-non-contact-voltage-tester/

Read more

2013 AHR Expo Innovation Award

The Fluke 805 Vibration Meter received the 2013 AHR Expo Innovation Award in the Tools & Instruments category. The 805 was selected by panel judges made up of ASHRAE members based on the tools’ innovation, application, value to the user, and market impact. The award was presented during the AHR Expo on January 29 at the Dallas Convention Center.

Read more