How Do We Test For Continuity Using Digital Multimeters?

As far as testing is concerned, testing for continuity also holds a big deal to know if something is wrong with your electrical circuit. It takes a significant stand in testing since it will allow you to know if there’s something wrong with the current flow. Technically, it checks if the current in the circuit is still continuous.

Think of it this way, if a straw is bent, little liquid can pass through it and if in such circumstances that it is punctured, then all liquids will likely seep through that hole. It is the same thing with electrical circuits. Devices will not function properly if the current can’t flow freely.

Watch out for these two things…

There are two things that you need to watch out for when you test for continuity. Mainly, these are the resistance between the two points measured. Ideally, low resistance means that there is electrical continuity. Meanwhile, high resistance means that the circuit is open and therefore, the continuity is lacking.

The best device to measure is a digital multimeter.

Fluke Digital Multimeters are one of the most versatile tools that a maintenance person can have. Not only does it boast advanced functions, but its efficiency is well-spoken. This infamous tool has all the qualities that Fluke tools possess, but the most notable one will truly be keeping workers safe from possible electrical hazards that are inevitable to happen.

These are the most preferred tools for testing continuity since digital multimeters can be used to test switches, fuses, electrical connections, conductors, and other components. Its flexibility to test multiple assets in one makes them the most suitable tool for the job.

Benefits of Continuity Testing

According to Power Assembles, in order for electricity to flow, things need to stay connected. Ideally, there can’t be any breaks in the pathway or there won’t be a continuous flow of electricity. And this is where the need for continuity testing comes in. One of the huge benefits that continuity testing holds is its ability to determine faults within electrical circuits that can be harmful to man in the long run. But that’s not all, take a look at the other benefits that they hold…

Other benefits of continuity testing:

  • Continuity testing can let you determine if a circuit is open, closed, or shorted.
  • It lets you know if a fuse is good or blown.
  • Makes sure a switch is operating properly.
  • Verifies wires operating on the same circuit.
  • Validates whether wire and cable assemblies are functional.
  • Helps test the resistance of conductors.

Here’s a quick guide on how you can do continuity testing using digital multimeters.

Let’s go into detail on how you can safely perform a continuity test using your digital multimeter. And no, it’s not as complicated as you may think. It’s actually fairly easy to understand, it only takes a couple of steps for you to give this a shot. According to an official Fluke source, here’s how you can do it…

  1. First, insert the black test lead into the COM jack.
  1. Then insert the red lead into the VΩ jack. When finished, remove the leads in reverse order: red first, then black.
  1. With the circuit de-energized, connect the test leads across the component being tested. The position of the test leads is arbitrary. Note that the component may need to be isolated from other components in the circuit.
  1. The digital multimeter (DMM) beeps if a complete path (continuity) is detected. If the circuit is open (the switch is in the OFF position), the DMM will not beep.
  1. When finished, turn the multimeter OFF to preserve battery life.

Get your digital multimeters through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Shop Now: https://presidium.ph/?s=clamp+meter+

Read more

Electrical Measurement Safety: How to Test Your Test Leads?

Test leads are a common sight to maintenance and women who are constantly working in electrical testing. It is also a known tool for electrical measurement safety that is often seen connected to digital multimeters. What most users do not know is that it is a Fluke accessory that is ideal to use in every operation especially if you’re using a digital multimeter (or a Fluke device that can be connected to test leads).

Importance of test leads.

Some people might think that it’s okay to measure without leads. But having to do so is very unwise. Never take your leads for granted. Even with the use of the infamous Fluke tools, you will still not be completely bulletproof when a hazardous occurrence takes place.

Test Leads will act as the first line of defense when you encounter high currents. Given the electrical measurement safety that it provides users, it makes it an essential part of test tools, especially for digital multimeters.

Make sure that your test leads are safe to use.

It is partly common knowledge that test leads are a vital part of every digital multimeter. With this said, you need to make sure that they are always in good working condition. Keep in mind that Fluke test tools are always going to be something more when they are paired with Fluke accessories like test leads. But beware, test leads may seem like a durable accessory but they are also prone to over usage and wear, making them decrease in performance.

Therefore, it is particularly important for you to inspect them before and after usage. A malfunctioning test lead can make matters worse for you than you think. In the maintenance department where accurate reading is necessary, a worn test lead may just get you into trouble. You see, test leads are prone to giving inaccurate readings when they are (1) under-rated, (2) worn, and (3) poorly manufactured.

Prevent the possible hazards.

Although test leads are naturally safe to use, there is an excessively significant difference once it starts to get old. Ideally, all test tools and accessories need a keen eye as well as all sorts of maintenance checks to keep them in good working condition. And this does not leave out test leads. If there are no maintenance checks for these test tools, daily maintenance operations might take a turn for the worst.

Remember that test leads are our first line of defense when working with high currents? Well, at worst and your test leads are in real bad shape to perform any extremely sensitive maintenance checks, then your test leads may provoke electrocution and shock hazards for the user. Therefore, it is very much preferred to also check your test leads to prevent the possible hazards that they may pose.

Do not forget to evaluate the test leads!

You read it right, your test leads also need to evaluate to ensure that they are still fit to do readings accurately and safely. It is simple to apply these in your day-to-day tool maintenance check. Trust that caring for your test leads early on can reap rewards in terms of future use. This will ensure accurate readings in every electrical measurement operation. Here’s how you’ll do it according to an official Fluke source!

Assessing the test leads:

  • Make sure to evaluate the leads while it is plugged into your DMM (digital multimeter).
  • Assess your leads using a simple OHMs measurement to ensure reliability.
  • You may isolate a problem to one lead or the other by assessing them separately.
  • If you are doing separate testing, simply connect one lead at a time between the ohms and common input.
Photo Source: Newark

Additional Tips: Conduct an inspection for your test leads.

Some of the underlying issues of test leads can be seen in plain sight. A visual inspection might just do it. It is simple, doable, and will not require much of your time. That is if you know what you are looking for and where to look for faults.

When you are conducting a visual inspection, you should (1) check the insulation. Make sure that it is not cracked or nicked. This is because with age the insulation material—whether PVC or

silicone—can become dried out, brittle, and susceptible to cracking. (2) Be sure that there are no gaps or cracks located at the junction between the insulated wire and the banana-like plugs at each end.

Resolve these failures using Fluke Tools!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Shop now: https://presidium.ph/?s=test+leads+

Read more

Electric Safety: 5 Preventive Practices to Keep You From Harm During Operations

Method with caution is the rule of thumb of most people who are working with electricity. Live wires or dead wires, one should never be complacent when testing or doing maintenance checks. Nevertheless, there will always be a certain pressure for workers to get the job done no matter what happens. And when certain pressures are breathing down your neck, you might have the tendency to miss a few electric safety steps.

However, missing a few safety steps shouldn’t be something to feel bad about. Actually, even professionals can sometimes make those mistakes. The bigger picture is your safety when you’re around electrical wires. So here are things that you should prevent doing when you’re around them.

Here are preventive practices you should keep in mind when testing electricity…

These are just quick reminders for people who are working closely with live wires (or dead ones) daily. Ignorance of simple things can sometimes be the main cause of a project’s destruction or an immediate trip to the emergency room. Therefore, it’s always a smart move to be very careful and attentive when doing electric testing. Here are some of the common mistakes you should watch out for.

Electric Safety: Working on live circuits

You should limit your exposure to live wires as much as possible. One of Fluke’s best features is its ability to take measurements from afar making its user well protected and away from danger. The best course of action is to de-energize the live wire or switch off the main power source. But then again, why should you vie away from electrical circuits when you have your full protective gear on? It’s because your PPE can only protect you to a certain extent. So, if you’re working with live circuits, better have full insulted tools together with your PPE.

Electric Safety: Refusing to upgrade test tools

You have to upgrade your test tools. We’re not saying you should purchase every time a new one comes out, but if the said tools are going to help you in doing the job better, then, why not right? Good tools are an investment especially if you’re planning on having a career in the electrical department.

Your tool might be working perfectly fine right now but can you still say the same 10 years after? No matter how good your test tool is, opting to purchase a more advanced tool that can keep you safer is always preferred. These advanced tools may be worth the investment than the old ones you have right now.

Electric Safety: Holding test tools with both hands

Actually, try not holding anything at all if it’s possible for you to do so. The goal of every operation is for you to limit your contact to any live wires or any tool that can bring you harm. So, if you must hold your tools when testing electricity, always do it with one hand. Doing so will lessen your exposure to harm if ever there are any unfavorable occurrences.

Nevertheless, the best option for you is to go hands-free (if the operation or the project itself allows it). You can try hanging your device somewhere while testing electricity. Some Fluke tools actually have this feature so that any worker can feel safer doing a ‘hands-free’ job.

Electric Safety: Replacing fuses with cheaper ones.

The fuses that you bought together with your digital multimeter are tested in regards to the CAT safety standards. Moreover, the one that is originally installed in your device can surely withstand any overload or faulty electric wiring. On the other hand, buying from another source might not level up to the original one. It’s always to be better off safe than sorry, so when replacing your digital multimeter’s fuses, buying from an original source is always the ideal choice.

Electric Safety: Don’t neglect your test leads.

One of the most important accessories you can have for your digital multimeters is your test leads. Remember, test leads don’t come in one form. There are a lot of other types that are better suited for the project you are working on. A word of advice, for further safety measures, try looking (or consider purchasing) test leads with finger guards, non-slip surfaces, shrouded input connectors, and those with double insulation.

Purchase from an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines.

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Read more

Why is Calibration Important?

Often, we hear calibration mentioned when we search for Fluke tools online. But do we really know what it truly means? Calibration is one of the most important steps to knowing if your device is measuring up to its full potential, and that is why it is important. Given that there are different devices, calibration also comes in different forms relating to the tool that needs to be calibrated.

What is Calibration?

A value of a tool is everything. Calibration is the process of comparing a device under test of an unknown value. Only this time there will be a reference standard of a known value. With this process, a thorough reading can be done with the tool being used. By performing calibration to tools, errors can be determined, faults can be found, limitations can be evaluated, etc.

Take thermometers as an example. It is a given fact that thermometers measure temperatures, right? You can conduct a calibration test on thermometers by putting them in water with a boiling point of 212 degrees Fahrenheit. By doing so, you will be able to learn the errors that the thermometer holds. Remember, visual facts hold less than actual testing. And by placing calibrated reference thermometer under a series of tests, you will be able to find out its precise value. One of them is putting the device under test, which is the thermometer into the water, yes that is one way to do it.

But do not be mistaken, calibration is not an act of corrective adjustment. Corrective adjustment is completely different from calibration which also requires the use of different methods. Nevertheless, calibration is a process that leads you to the step of corrective adjustment only if it applies to the device.

Why is it important?

Calibration tools are relied upon by many professional engineers, technicians, metrologists, and more. This is because calibration can help them gain more confidence regarding the tool’s safety and reliability. It is not just tools that are calibrated but a lot of things such as flights, medications, nuclear facilities, computers, appliances, cell services, and many more. These industries also go through the process of calibration to not only ensure safety and reliability but also for quality and cost.

Calibration is a way to make sure that all tools are working in their optimum condition. Moreover, it is also a way to prevent failures when in use or while in production.

But that is not all, what makes this all the more impressive is its enablement to open doors to opportunities. Calibration takes steps (considering that it is continuously developing) to improve scientific discovery and industrial manufacturing.

The Chief Corporate Metrologist of Fluke Corporation

Jeff Musk actually has some very important insights regarding the importance of Fluke calibration. According to the chief, he said, “If you are performing measurement where the results will make a critical decision such as a safety test or if a manufactured product meets requirements, you must have your equipment calibrated so that the performance is known and fit for purpose. This is especially important if you want your results to correlate with others around the world.”

Another fact of why calibration is important is because all things wear down, especially with electronics. Overall, expect that your device will not look, feel, and perform as it once was when it was brand new. Expect that there will be lapses in time. But by doing the annual calibration, you will be able to make sure that it operates properly based on its product specifications.

Different kinds of calibration.

There are various kinds of Fluke tools in the market, each boasting special functions, and applications in different electrical or mechanical work. With this said, it is ideal to have not one but multiple calibration tools to make sure each device works properly and perfectly in different projects or operations. Fluke has six different calibration tools that you need to know about. Here are some of them…

  1. Electrical
  2. RF
  3. Temperature
  4. Humidity
  5. Pressure
  6. Flow

Calibrate through an authentic source!

Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Rest assured that all tools have gone through proper tests to prevent faults from penetrating your projects that might cause bad downtimes by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

You could reach us at info@presidium.ph / calservices@presidium.ph for inquiries.

Read more

All You Need To Know About Non-Contact Voltage Testers

Being one of the sought-after tools in the market, Fluke’s non-contact devices take center stage. Fluke being able to create tools that can help workers take tests and measurements from a safe distance is one of its defining features. Expect that almost half of the test tools will have this winning function.

On the other hand, non-contact voltage testers don’t stray far from its family of digital multimeters. Only this time, they offer a more direct approach to detecting voltages. Not to mention, they are also very handy in terms of sizes. Here, we will be discussing all you need to know about them!

What is a Non-Contact Voltage Tester?

For staff in the electrical, industrial, and maintenance departments, this is a huge sigh of relief. Gone are the days of hesitant testing and risking people’s safety. To put it plainly, non-contact voltage testers are used to see if the voltage is present or not. Additionally, this tool can also detect mis wires of electrical outlets.

This portable tool is very well-liked for its simple and quick approach to see if the harmful voltage is taking place within your outlets or electrical panels. What is better? It does not entail a lot of buttons pushing or navigating, but it is mostly favored by maintenance people for its direct approach.

Choosing the right Non-Contact Voltage Tester for you.

There are diverse types of non-voltage testers. It’s best if you assess the operations, you usually do before purchasing a non-contact voltage tester to make the most out of it. Plus, keep value in mind when looking at non-contact voltage tester prices and remember that the best price does not necessarily equal the best value. With this said, take note of these Fluke non-contact voltage testers to determine the one for you.

Fluke 1AC II VoltAlert™ Non-Contact Voltage Detector

The Fluke 1AC II Volt Alert is perfect if you need a high-performing tool for general voltage detection. Uneasy leaving tools to shut down on its own? This non-voltage detector comes with an on/off switch of your convenience.

Here are more of its notable capabilities:

  • Voltage range: 90 V to 1000 V AC
  • Voltbeat™ technology and continuous self-test — so you always know it is working
  • Voltage indication: tip glows and beeper sounds (beeper can be disabled)
  • Safety: CAT IV 1000 V
  • On-off switch for maximum battery life

Fluke 2AC VoltAlert™ Non-Contact Voltage Detector

The Fluke 2AC Volt Alert is perfect for people who usually work in environments wherein sight indication is more preferred than sound. If you are a person who’s always on the go and needs a ready stead voltage detector, then the Fluke 2AC VoltAlert is the one for you. Although it still does feature audio beep voltage indicators, so technically speaking it’s just a tad bit more advanced than Fluke 1AC considering its extra features.

Here are more of its notable capabilities:

  • 90 V to 1000 V AC voltage range
  • Voltage indication: tip glows
  • Voltage indication: audio beeper for quiet environments
  • Safety: CAT IV 1000 V
  • Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready
  • ‘Battery Check’ function ensures battery is in good condition

How do non-contact voltage testers work?

As we’ve mentioned, it is very simple and direct. Just touch the tip of your non-contact voltage tester to an electrical strip and wait for a beeping sound. Also, watch if the point turns either red or green. Red light indicates that high voltage is present while a green light tells that the wire does not harbor any dangerous voltages.

Here are things you should also remember when operating a non-contact voltage tester…

  • The tip glows red and a beeper sounds when voltage is detected
  • A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
  • Optionally, the beeper can be disabled for use in quiet environments
  • Continuous self-test so you always know it is working
  • When the tip blinks red you know it is working properly
  • Provides a continual visual indication that the 1AC II is on
  • 90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use.
  • Wide voltage detection range allows for use in a broad range of applications
  • Also available in a low voltage model from 20 V to 90 V AC for controls circuits

Can I get shocked while using a voltage tester?

We know, it is the complete irony for a device to be called “non-contact” and still require contact when being used. However, if your concern is getting shocked then let us put you at ease. Fluke specializes in making tools that prevent workers from getting hurt, and this does not leave out the Fluke voltage testers. 

Considering shocks, make sure that you are using and holding your voltage tester properly. Doing so will shield you from shocks. Only hold them on the insulated handle when you are undergoing an operation.

Okay, so we’ve touched up where to hold your voltage tester. Now, let us talk about watching where you are placing your other free hand. Make sure that it is not touching something that will expose you to live currents still (if ever the insulation fails).

Another word of advice, never undergo testing without wearing the proper personal protective equipment. Tools are just covering one part in protecting you from electrocution but having your PPE will provide you the complete safety and confidence you need when you’re working with these kinds of projects.

Some non-contact voltage testers can show a false positive or negative if…

Environmental factors can play a key role in getting accurate data from test tools. These are things that you need to consider, and from time to time, adjust to. Like all tools alike, the non-contact voltage tester is not different. At times, the device may show false positive or negative results. This is why it is especially important for you and your safety to take note of what is causing them for prevention purposes.

Reasons for false positive or negative:

  • The insulated test point touches grounded metal
  • The cable being evaluated is partially buried
  • The user is isolated from ground
  • The tester is used inside a metal enclosure
  • The cable is shielded
  • The battery is dead

The difference from other non-contact Fluke devices.

Fluke’s main priority is developing test tools that will keep workers and maintenance people safe in every operation. And to this day, they have kept their promise of providing workers the best test tools there are. This superbly handy non-contact voltage tester, however, differs from most since, well, it is smaller with more direct functions. No need to press a lot of buttons, no complicated navigation, and you will not even spend time reading the manual for this one. That is one of the winning factors of this test tool.

Purchase from an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines.

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Fluke 1AC: https://presidium.ph/product/fluke-1ac-a1-ii-non-contact-voltage-tester/

Fluke 2AC: https://presidium.ph/product/fluke-2ac-non-contact-voltage-tester/

Read more

Top 13 Causes of Rotating Motor Failure from Lowest to Highest

The number one priority of maintenance men is to focus on machine faults, errors, or defects and stop them before they even happen. After diagnosing the machine, they will then settle on the most suitable tool to get the job done.

However, considering rotating machines, things can always get a tad bit tricky. These kinds of machines are prone to imbalance, looseness, misalignment, and wear. Naturally, the best way to deal with them is by having regular checkups with the most trusted test tool in the industrial department, and those are Fluke test tools.

But first, here is the top thirteen causes of motor failure…

Motors are saturated everywhere especially in industrial departments. However, over time, these motors are also prone to malfunction and eventually slow down. Naturally, they become more complex and technical which may prove to be a challenge for maintenance men to fix without the right tools. Let us delve into the top thirteen causes of motor failure for better understanding.

Rotating Motor Failure: Power Quality

  • Transient voltage

The impact? Motor winding insulation. Technically, it is going to break down leads that will lead to motor failure and will eventually lead to long downtimes.

Criticality status – High

  • Voltage imbalance

The impact? This will create an excessive current flow. It will impact one or more phases that will increase operating temperatures. In the end, it will lead to insulation breakdown.

Criticality status – Medium

  • Harmonic distortion

The impact? Briefly, what happens is a decrease in motor efficiency. You see, harmonic distortion is additional energy that is used in the motor shaft. However, this kind of energy also contributes to internal energy losses that are bad for the machine. It can come in the form of heat and over time will cause deterioration of the insulation of the windings.

Criticality status – Medium

Rotating Motor Failure: Variable Frequency Drives

  • Reflections on drive output PWM signals

The impact? Motor winding insulation breakdown. This is also the works of impedance mismatches that root out from improper installation, improper component selection, or equipment degradation over time.

Criticality status – High

  • Sigma current

The impact? Mysterious circuit trip caused by protective earth current flow.

Criticality status – Low

  • Operational overloads

The impact?  This might do permanent failure to your machine since it causes premature wear on motor electrical and mechanical components.

Criticality status – High

Rotating Motor Failure: Mechanical Faults

  • Misalignment

The impact? There are three types of misalignments that could occur. This is angular misalignment, parallel misalignment, and compound misalignment. All of which leads to premature wear in mechanical drive components.

Criticality status – High

  • Shaft imbalance

The impact? This may be caused by a lot of factors such as dust accumulation, missing balance weights, manufacturing variations, and a lot more. This will result in premature wear in mechanical drive components and total mechanical failure.

Criticality status – High

  • Shaft looseness

The impact? You see, a looseness that is caused by the actual rotation might stem out from excessive clearance between rotating and stationary elements. This can also result in premature wear and failure.

Criticality status – High

  • Bearing wear

The impact? Remember that this can also cause by several things. These are:

  • A heavier load than designed for
  • Inadequate or incorrect lubrication
  • Ineffective bearing sealing
  • Shaft misalignment
  • Incorrect fit
  • Normal wear
  • Induced shaft voltages

Ultimately, accelerated wear on rotating components can result in bearing failure.

Criticality status – High

Rotating Motor Failure: Improper Installation Factors

  • Soft foot

The impact? There are two types of “soft foot” that you need to know about. There is a parallel soft foot and angular soft foot. Parallel soft foot takes place when one of the mounting feet is higher than the other three. Meanwhile, angular soft foot happens when one of the mounting feet is not parallel or “normal” to the mounting surface. But in totality, it heavily makes an impact on the misalignment of mechanical drive components.

Criticality status – Medium

  • Pipe strain

The impact? This will generally put a strain on rotating components and will cause shaft misalignments. Naturally, this will also result in premature failures.

Criticality status – Low

  • Shaft voltage

The impact? Arcing across bearing surfaces create pitting and fluting resulting in excessive vibration and eventual bearing failure

Criticality status – High

Resolve these failures using Fluke Tools!

Hey, we made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your rotating machines? Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your rotating machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Read more

Fluke Maintenance Tools: Best Fluke Sets and Kits You Should Consider Buying

Fluke products are already an amazing feat when performing on the field, but what more if they have incredible accessories to back them up? To say the least, fluke products don’t even need any introductions anymore as they already have a steady reputation of being the best and the most reliable in the test tools industry. Fluke maintenance tools are not just popular with their advanced functions, but they are also known to maintenance professionals for not only showcasing the ease of use but also a sense of security.

Why buy fluke sets and kits?

We’re not saying that purchasing individual products is not practical, but maybe, just maybe, there is something with Fluke sets and kits that you’re missing out on. Let’s face it, test kits and sets offer more variety and are actually more organized (but of course this depends on the person handling them) compared to individual purchases. Here’s how it’s going to benefit you:

Ease of grabbing the appropriate kit to bring on the job

You no longer need to fumble for the right multimeters to use (because yes, there is a variety of multimeters and not just one). Additionally, you get to dodge the frustrations of untangling wires just to see which one can do the job right.   With a set or a kit, simply bring the entire bag without worrying if you’re bringing the right stuff.

Organized

Let’s get this straight, being organized actually rests in the hands of the men in charge. However, buying Fluke sets and kits gives a sense of organization in terms of usage since it compartmentalizes each tool based on its specialty.

Complete tools and accessories

When you buy sets and kits, one thing you can always count on is the completion of the device’s tools and accessories. Yes, when you buy individual products, some of them already have one or two accessories, however, buying a set lets you have more variety in terms of its usage potential.

Think of a camera. When you buy cameras, you’ll have some of its accessories such as chargers and standard lenses. However, if you’re buying a set or that camera, you’ll get to have so much more. A camera set can include camera stands, lens options, SD cards, a camera bag, etc. Basically, the bottom line is, you get the entire package.

Have variety

You will never feel limited when you buy Fluke maintenance tools in sets and kits. There are times when we feel limited in terms of options because of not having certain accessories or add ons. Nevertheless, when you decide to purchase an entire set, have the ease of thought that ‘you have everything you need’ so challenging issues won’t seem so daunting anymore.

What are the best Fluke maintenance tools in sets and kits?

Trust that these test tools and kits can improve the performance of any of your existing Fluke devices. There are several to choose from depending on what kind you need for the project.  Here are some of them:

Fluke Insulated Screwdriver Kit

When you’re troubleshooting electrical equipment with loose nails, it’s best if you have insulated screwdrivers instead of using ordinary ones. Normal DIY screwdrivers can’t protect you from electric shocks. And boy, believe us when we say you would want to have the utmost protection when you encounter those hazards. To recall, electrical shock, to some degree, can be very dangerous for a person that can lead to fatalities.

Nevertheless, when you use insulated hand tools, you’ll have a certain level of protection when you encounter major electrical shocks.

Key features:

  • Precision insulated screwdriver kit
  • 7 insulated screwdrivers: 2 square, 3 slotted, and 2 Phillips
  • Certified to 1000 V ac, 1500 V dc to keep you safe
  • Ergonomic handle adapts to user to cause less strain and max torque
Fluke Insulated Screwdriver Kit

Fluke 87V IMSK Industrial Multimeter Service Combo Kit

This kit includes one of the widely used industrial digital multimeters in the world.  just let you efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations, With the use of a digital multimeter, you can confidently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations. As if that’s not impressive enough, this kit also comes with extra add-ons that you don’t usually find in singular purchases.

Key features:

  • Fluke-87V Multimeter has True-RMS accuracy and advanced functionality to give you the results you need.
  • Fluke-i400 AC 400A Current Clamp turns the 87V into a clamp meter.
  • Select accessories like temperature probe, test leads, and alligator clips included.
Fluke Industrial Multimeter Service Combo Kit

Fluke 287 FlukeView® Forms Combo Kit

One of the key functions of the FlukeView Forms Combo Kit is maximizing the time of every maintenance professional by being able to track down elusive, intermittent problems or monitor equipment with any of its functions. Moreover, have the convenience of storing your data reading into the device itself.

Don’t feel limited by its functions since this combo kit comes with multiple accessories that include:

  • Fluke-287 True-rms Electronic Logging Multimeter with TrendCapture
  • FlukeView Forms Software and cable
  • 80BK-A Thermocouple Probe
  • The CAT III 1000 V 10 A Modular test leads (red, black)
  • CAT II 1000 V 10 A Modular test probes (red, black) and caps
  • CAT III 1000 V 10 A Alligator Clips (red, black)
  • C280 Soft Case for meter protection and accessory storage
  • Amp Jack Plug Set
  • TPAK Magnetic Meter Hanger for Hands Free Operation
  • Requires Fluke ir3000 FC InfraredConnector for Fluke Connect communication (not included with this kit)
FlukeView Forms Combo Kit

Get yours from a trusted distributor!

Presidium PH is an authorized distributor of Fluke Maintenance tools in the Philippines. So, if you’re looking for a combo kit that will suit your needs or your next project, this is the one-stop-shop to go!

Read more

Fluke Maintenance PH: The Best Tool For Hybrid Vehicle Upkeep

What is a Hybrid Vehicle?

To put it plainly, hybrid cars are powered by electricity and gas. This kind of vehicle has the dual purpose of using an electric motor together with gasoline to get the car moving. Additionally, its system also captures energy through regenerative braking.

Furthermore, this vehicle has the liberty to switch from running on an electric motor to running on a gas engine. We know what you’re thinking, can they also work together at the same time? The answer is, yes. Combine both of these elements together to make a fully functional vehicle, and what do you get? A better car for the environment and a blend of good performance and efficiency for everyday use.

While this is all very interesting, let’s get into details of what you should know about the upkeep of Hybrid Vehicles.

What is the difference between Hybrid Vehicles and regular cars?

You might be questioning what’s the difference between a hybrid vehicle and a regular car. Although both types of cars have their pros and cons, they are also very different in nature. With hybrid vehicles, since both gas and electricity are working together, it is tagged as an environmentally friendly car. Not to mention the most cost-effective since it runs on dual power (not very cost-effective with repairs though).

On the other hand, regular cars run on gasoline and diesel engines. Unlike hybrid vehicles, regular cars are tagged as one of the heaviest root causes of pollution. Not only does it puff toxic chemicals, but it also causes fuel leaks and engine noises. Although, regular car repairs are a far cry from costly compared to hybrid ones. Ultimately, cars will be cars, and the major difference between driving a hybrid vehicle and a regular car is what type of power they use under the hood to keep the car going.

Fluke Maintenance: Top issues of owning a Hybrid Vehicle

No matter how luxurious or how “good performing” a vehicle is, there will always be faults, disadvantages, and shortcomings especially in the long run. Daily usage can lessen a car’s performance. However, your car’s performance over time is not the only thing you should take into account. Hybrid vehicles are known to be one of the advanced car technologies of today. Hence, you should also know how to maintain its overall production.

Here are some of the top issues that you’ll likely face when you decide to own a hybrid vehicle:

  • Keep an eye on its batteries – Unlike regular cars, hybrid vehicles are known to consume batteries more rapidly. This is because of its dual feature of running on electric motors and gas engines. Therefore, this will require more frequent change of batteries than a regular car. One more thing! Hybrid batteries also have the tendency to be more costly than the regular, so watch out for those!
  • The thing about catalytic converters – One of the important aspects of owning a hybrid car is to regularly check old spark plugs, wire, oxygen sensors, faulty fuel sensors, and filters. One faulty error from these and this might lead to your hybrid’s issues on engine performance. Additionally, this will also cause major problems with the catalytic converter.
  • Oxygen sensors – One of the most important parts of your hybrid car’s maintenance is to regularly monitor your oxygen sensors. In such cases when your hybrid reaches high levels of oxygen in the exhaust signals, this can result in big issues with your hybrid’s gas mileage.
  • Evaporative emissions system – Is one of the repetitive repair issues that a hybrid faces. These can cause leaks that are known to be very difficult to troubleshoot. Furthermore, if check engine lights are on, it is advisable for you to have an appointment to have it checked immediately

Fluke Maintenance: The upkeep for Hybrid Vehicles

The Fluke Deluxe Automotive Multimeter is a complete investment. Find these faults in advance with the use of this innovative device. The Fluke Automotive Multimeter has measurement functions, troubleshooting features, and accuracy levels needed to solve problems on conventional and hybrid vehicles. All multimeters are a spectacle at work, especially with troubleshooting complex machines. However, the Automotive Multimeter is pushing limits with very notable innovative features:

  • It can measure voltage up to 1000 V AC and DC
  • Can measure current up to 10 A, 20 A for up to 30 seconds and frequency to 200 kHz and % duty cycle
  • Allows you to do temperature measurements with an optional temperature probe.
  • Features an analog bar graph to track changing or unstable signals.
  • Min/Max/Average recording with Min/Max Alert to capture variations automatically.

Have the confidence to drive your hybrid in style knowing that everything is in perfect working condition. The Fluke maintenance tools such as the Fluke Deluxe Automotive Multimeter will do the dirty work for you, when necessary, issues with your hybrid are resurfacing.

Get one of your own from a trusted Fluke distributor: https://presidium.ph/

Read more

Fluke Maintenance Tools: The Future of Renewable Energy

We are living in an ever-changing world where innovation is not slowing down. People always look to the future for new and exciting things to try. In this regard, it’s technology that holds the number one spot in terms of advancement. 

However, it’s no secret that it’s also the top cause of pollution and the degradation of the earth. Mobile phones alone actually contain harmful toxins when discarded. Ultimately, these devices (and others) have the ability to contaminate groundwater and soil; two of the most vital elements keeping nature alive. In the long run, if these toxic technological innovations are not remedied, it’s continuously going to destroy our lands.

Because of the sudden surge of technological waste, professionals are now trying to promote clean and sustainable energy. One of them is Wind Power and Solar Energy. These technological advancements are believed to be the future of electricity. And what better way to maintain these devices than the most trusted Fluke Maintenance Tools in the market.

What is renewable energy?

The future of energy is looking golden. As we try not to wreak havoc in the natural movements of things, experts have found a way to sustain the richness of nature by using it as the main conduit of electricity and power. That is renewable energy. 

Advantages of using renewable energy.

One of the most prominent advancements in the industry is wind energy and solar energy. Not only is it benefiting the industry and the world’s natural resources, but it is also benefiting the people in more ways than one. Here are some of its notable advantages:

Wind power and solar energy are cost-effective.

Wind doesn’t just benefit us by blowing cool air on our faces on a hot day, but it can also give us the most needed necessities in our day-to-day lives, which is electric energy. This kind of renewable energy is actually recognized as one of the low-priced energy sources that are currently available. Ultimately these giants use the wind to convert energy produced by the movement of wind turbine blades to power establishments and other spaces. The bottom line is, the wind is free. As long as you got wind, then you can get energy. 

Meanwhile, solar energy is also one of the most in-demand tools of the current date that many households have decided to install. This is because it is also one of the most cost-efficient devices for you to power up your systems. Not only is it low-cost but it is also tagged as one of the low maintenance sources of power you can get your hands on. The only thing you have to do to maintain it is to keep it clean.  

It’s a clean fuel source.

When we say that these tools are the ultimate eco-friendly resources to produce energy, we weren’t kidding. Compared to power plants, wind power and solar energy does not omit the combustion of fossil fuels, coal, natural gas, nitrogen oxides, and other harmful elements. Moreover, these technologies also do not cause atmospheric emissions that cause acid rain, smog, or greenhouse gases. Instead, it solely relies on wind and the sun to create energy.

Wind and solar power create jobs.

With technology as big and vast as this, you would need to have a lot of people maintaining it and technically, keeping it alive and going. Therefore, it has also become one of the fast-growing careers in terms of manufacturing, installation, maintenance, and supporting services by 2050 according to the Department of Energy.

Common disadvantages:

  • Spinning turbines can kill flying birds
  • Bats have also been killed by turbine blades
  • It can be a bit noisy
  • Can be a photobomber in most aesthetic landscapes (unless you think otherwise)
  • The installation process might be costly
  • Weather dependent
  • Uses a lot of space

Fluke tools are the future of renewable energy.

The best maintenance tools in the market come in the many forms of Fluke Tools. In a nutshell, Fluke tools are the most advanced test tools in the industry that can capture, diagnose, and make solutions to the most challenging technical difficulties maintenance men can encounter. 

Wind and solar power do make matters easier in terms of sustainable energy. Yes, they basically only need natural resources, such as sunlight and wind to function, but that doesn’t mean that they no longer need maintenance themselves. These technologies actually need regular maintenance checks and the best tools to perform these rounds are with Fluke Tools. 

With a wide selection of the best troubleshooting and maintenance devices, this is your one-stop-shop for all your device needs when it comes to caring for wind and solar energy tools. When we’re talking about the future of sustainable energy, ultimately, we also need to think about the tools we need to sustain and care for them and this entails the best performing tools in the industry which is Fluke tools. 

Get them from a trusted distributor in the Philippines: https://presidium.ph/

Read more

Fluke Accessories: Tools That Can Make a Difference in Every Operation

Having the infamous yellow holstered Fluke tools is simply amazing to have in your beck and call. Still, no matter how great Fluke tools are, you can always add some “add ons” that can definitely make you and your tool perform well on the field. Of course, no doubt that Fluke items can perfectly perform well under high-pressure surroundings and in rough environments, but with the boost of these Fluke accessories, they might be able to do more.  

Simple as they may seem, some of these accessories are the key to protecting and making sure your Fluke items are well cared for in the field. Here are the Fluke accessories that can definitely make a difference in every operation you do.

Fluke High Voltage Probe

This is mainly used for digital multimeters. On the contrary, each digital multimeter actually includes a high voltage probe. At this point, you might be wondering why it proves to be useful. Well, probes with the help of digital multimeters can measure AC/DC voltmeter of 6000 V. This means that the probe can make measurements to televisions, photocopy machines, etc. These electronics are Category I of the CAT safety ratings. Nevertheless, though rugged and reliable these Fluke accessories are, they all have limitations as well.

These kinds of probes do not work well when measuring higher voltages on power distribution systems. Rather, it provides higher accuracy when a voltmeter having 10 megohm input impedance is used.

Fluke High Voltage Probe

Fluke Suregrip Insulated Test Leads

Another way of getting the most out of your multimeters is with the use of Suregrip Insulated Test Leads. Ultimately, test leads have the ability to enhance your measuring or troubleshooting experience in any environment. These sure grip test leads will give you an advantage of 1.5 meters of added length. Naturally, you wouldn’t have to worry about hard-to-reach test points anymore.

Moreover, these leads also sport a rubber over-molded surface that creates a much more comfortable gripping experience for the maintenance person using it. That’s not all it showcases; this fluke accessory also features right angles and straight connectors. This feature lets you have a variety of test lead configurations to overcome hard-to-reach areas.

Fluke Suregrip Insulated Test Leads

Fluke Intrinsically Safe Headlamp

Trust Fluke to have everything you need when you’re performing even the most difficult troubleshooting and maintenance operations in the dark. That’s right, our next Fluke accessory provides much-needed light when panels are located in dark corners. The Fluke Intrinsically Safe Headlamp can let you work with both hands while giving you ample light to work with.

Ultimately, Fluke’s reliability and ruggedness go beyond its products. They aim to provide a healthy and safe environment for maintenance professionals to work with. This is why Fluke headlamps are one of the most convenient lights to take with you whenever you’re performing on the field with little light to work with.

One of its main functions is secure gripping of your hardhat with adjustable features. You can adjust the temperature of the light from a high mode to a low mode.

Fluke Intrinsically Safe Headlamp

Fluke Hard Case

Durability at its finest. Fluke tools are the most rugged and reliable in the industry. It’s no secret that you can probably use them in the most stressful environments, and they would still deliver flawless performance. Nevertheless, that doesn’t mean that Fluke tools are indestructible.

This hard carrying case has the capacity to protect your device and at the same time carry all of your Fluke accessories with its spacious interior. These cases are built with tough polypropylene that includes a molded carrying handle and a snap-on lid. It also comes with diced foam inside to thoroughly protect your tools and their accessories. A definite must-have especially if you’re planning on traveling to far places with your fluke tools.

Fluke Hard Case

Fluke Meter Case

One of the most convenient cases Fluke has is its soft meter case. This kind of case is actually built for more rugged usage. When performing troubleshooting and measuring operations in tough environments, these are actually the ideal cases that your tools should be stored in. Hard cases might be “tougher” on the outside, but with the soft case, you’ll have protection and flexibility in both.

Additionally, the inside of the cade is actually very spacious and organized. It showcases a separate nylon pocket for accessories and the Fluke tool itself. The main exterior of the case also features a belt loop for hanging purposes. This feature lets you focus on the task without worrying about carrying other tools.

Fluke Meter Case

Get one from an authentic source!

We’re not going to lie, of course, your Fluke accessories can be stored in other cases or you could probably get some of the test lead and probes from a secondhand source. But still, nothing beats the durability and the performance of new accessories. It’s a sure-fire, good investment especially if you’ll be using them on a daily basis.

Presidium PH is an official distributor of Fluke accessories in the Philippines. Thus, if you’re interested in purchasing one of these amazing products, make sure to visit our website. You’ll have plenty to choose from to level up your Fluke items. Happy shopping!

Read more