, , ,

Fluke Test Tools: Recommended Battery Testing to Ensure Optimal Uptime

One of the most important parts of every device is its batteries. Professionals in the industry even advise making rounds on batteries to make sure their performance is at a hundred percent. Although batteries today, are evidently more advanced than the ones before and are often tagged as low maintenance, this doesn’t mean that they should be dismissed. Battery testing is one of the musts that every maintenance man/woman should practice. Ultimately, with the help of Fluke test tools, these devices can ensure battery health with a click of a button.

In light of battery kinds, the most popularly used are the uninterrupted power supply (UPS) and battery backup systems. Again, these types of batteries also hold a reputation for being maintenance-free. However, like all things, in time, these batteries are also susceptible to deteriorate over time. Not only that, but they are also prone to corrosion, internal shorts, sulphation, dry out, and seal failure. And when these issues occur, it will result in frustrating downtimes. 

Determining battery failure.

Voltage usually plays a big role in determining battery health. But, the question remains, is it enough? The answer is no. We’re not saying it’s wrong, but you can do more to ensure that your batteries are in a good state.

In totality, measuring voltage is only the tip of the iceberg. Online monitoring equipment or in-person voltage tests won’t give you the full picture of your battery’s health. This is because the voltage is an indication of your battery’s state of charge and not your battery’s health.

To make it clear, the measuring voltage will not tell you beforehand if your battery is degrading. In line with this, voltage testing also has a drawback when a load is applied.

A recommended approach to battery testing.

Instead of relying on voltage testing, try measuring battery impedance as well. In this way, you’ll have a better understanding of the internal resistance of the battery and not just its state of charge. Basically, if you measure battery impedance, this will give you a whole picture of your battery’s issues.

What is battery impedance and why is it preferred?

Battery impedance is made up of two components. Those are electrical and ohmic resistance. Let’s break them down! First, electrical resistance deals with the current flow in an electrical circuit. Meanwhile, ionic resistance measures current flow due to internal factors such as electrode surface area and electrolyte conductivity.

On the other hand, internal ohmic values or also known as the AC resistance can be a big factor in determining the battery’s overall health. AC resistance can be measured by injecting a small current and then later on calculated using Ohm’s law. But in this case, you might want to consider Fluke test tools for easier and more convenient results.

Measuring battery impedance.

Unlike voltage testing, measuring the impedance values can help you detect potential battery problems in advance. In time, a battery’s internal resistance can increase and when this happens, it means that the battery itself is already on the verge of degradation in the cell.     

The best practice for measuring battery impedance. You must be consistent. A single measurement cannot dictate the entire context of what is happening or what is about to happen with your batteries. Make it a habit to measure impedance over months and years. It also helps to examine changes and don’t forget to put it on record every time you make measurements.

Fluke Test Tools: Fluke Battery Analyzer

The best tool to measure battery impedance is none other than Fluke test tools! Specifically, the Fluke Battery Analyzer. This is the ideal fluke test tool for maintenance, troubleshooting, and performance testing of individual stationary batteries and battery banks used in critical battery backup applications.

As we’ve discussed, one of the key points that need to be measured is internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency, and temperature. With the Fluke Battery Analyzer, you can measure all of these components with just one tool making it a great investment for long-term use!

Get your Fluke tool from a trusted source!

Presidium PH is an authorized distributor of Fluke test tools in the Philippines. So, if you want to know more about Fuke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools in the market! (insert website link battery analyzer)

Read more
,

Fluke Thermometers: How to Get the Best Results!

There is no tool timelier than a Fluke thermometer during the surge of a pandemic. When we are limited to giving physical touch while working, we turn to instruments that can do the job for us. Fluke thermometers are not only supportive of diagnosing technical issues but are also capable of doing thorough temperature reads of different objects. However, this may also vary from the actual object you are measuring.

Recap! A lot of people mistake IR Thermometers for Thermal Imagers. So, what’s the difference? A simple explanation that sets these two fluke devices apart is that Fluke thermometers take an individual number which is the temperature measurement of a single spot on your target. Meanwhile, a thermal camera gives you thermal readings that let you visualize the actual hot and cold spots scenario.

Going back, it’s safe to say that it’s in everyone’s knowledge, Fluke thermometers are great in terms of performance! However, some might not be getting the full experience of these innovative thermometers. This is why we’re telling you how you can get the best results from Fluke thermometers!

Know your IR thermometer’s distance-to-spot ratio

The distance-to-spot ratio is known as the field of view. The field of view plays a critical role in terms of accuracy. This is because the angle of vision it sees will be the average of the temperature it detects.

Additionally, the distance-to-spot ratio also pertains to the size of the area (or spot) being measured. Make sure that the target is larger than the spot size the unit is measuring. The smaller the target, the closer you should be to it. When accuracy is critical, make sure that the target is at least twice as large as the spot size.

Watch out for shiny, “low emissivity” objects.

Yes, shiny objects have the tendency to bewilder your IR gun which as a result can give inaccurate results. According to EnnoLogic, IR thermometers are pre-set at an emissivity of 0.95.  However, objects with much lower emissivity ratings, such as polished metal, will give false temperature readings.

Another source from Thermo Works stated that most organic materials, including the by-products of plants and animals, have an emissivity rating of 0.95. In return, these are the ideal surfaces to point at if you want accurate results. Meanwhile, polished metals and other shiny things are known to have very low emissivity levels since they tend to be very reflective of ambient infrared energy.

Steam or dust can affect the accuracy of IR thermometers.

Remember that these elements can confuse readings for the simple reason that they blur the lens. Naturally, blurry lenses can result in inaccurate readings for infrared thermometers. Think of it this way, if you look through a camera with blurred lenses or steam, those elements will show in the photos. Therefore, before shooting your IR gun, always make sure to wipe the lenses with appropriate tools to better its reading process.

Avoid temperature-shocking your infrared thermometer.

We know that Fluke is known for its excellence of being the most versatile test tool in the market, and it’s not wrong. However, some of its tools are also quite sensitive depending on their usage. Nevertheless, don’t mistake this aspect as a weak spot since this does not dampen its high-performing nature.

Letting your Fluke thermometer simmer in its surroundings can ultimately grant you more chances to get accurate readings. Give your thermometer at least 20 minutes to bask in its given environment. For example, you’ve just only done temperature checks in a cold room and then moved on to a much warmer area. Immediately putting your device on the spot might not get you the most “spot-on” results, instead, let it sit and take in the surrounding for a minimum of 20 minutes.

Get your Fluke tool from a trusted source!

Presidium PH is an authorized distributor of Fluke Maintenance tools in the Philippines. Thus, if you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools in the market!

Read more
, ,

Fluke Maintenance Tools: Best Fluke Sets and Kits You Should Consider Buying

Fluke products are already an amazing feat when performing on the field, but what more if they have incredible accessories to back them up? To say the least, fluke products don’t even need any introductions anymore as they already have a steady reputation of being the best and the most reliable in the test tools industry. Fluke maintenance tools are not just popular with their advanced functions, but they are also known to maintenance professionals for not only showcasing the ease of use but also a sense of security.

Why buy fluke sets and kits?

We’re not saying that purchasing individual products is not practical, but maybe, just maybe, there is something with Fluke sets and kits that you’re missing out on. Let’s face it, test kits and sets offer more variety and are actually more organized (but of course this depends on the person handling them) compared to individual purchases. Here’s how it’s going to benefit you:

Ease of grabbing the appropriate kit to bring on the job

You no longer need to fumble for the right multimeters to use (because yes, there is a variety of multimeters and not just one). Additionally, you get to dodge the frustrations of untangling wires just to see which one can do the job right.   With a set or a kit, simply bring the entire bag without worrying if you’re bringing the right stuff.

Organized

Let’s get this straight, being organized actually rests in the hands of the men in charge. However, buying Fluke sets and kits gives a sense of organization in terms of usage since it compartmentalizes each tool based on its specialty.

Complete tools and accessories

When you buy sets and kits, one thing you can always count on is the completion of the device’s tools and accessories. Yes, when you buy individual products, some of them already have one or two accessories, however, buying a set lets you have more variety in terms of its usage potential.

Think of a camera. When you buy cameras, you’ll have some of its accessories such as chargers and standard lenses. However, if you’re buying a set or that camera, you’ll get to have so much more. A camera set can include camera stands, lens options, SD cards, a camera bag, etc. Basically, the bottom line is, you get the entire package.

Have variety

You will never feel limited when you buy Fluke maintenance tools in sets and kits. There are times when we feel limited in terms of options because of not having certain accessories or add ons. Nevertheless, when you decide to purchase an entire set, have the ease of thought that ‘you have everything you need’ so challenging issues won’t seem so daunting anymore.

What are the best Fluke maintenance tools in sets and kits?

Trust that these test tools and kits can improve the performance of any of your existing Fluke devices. There are several to choose from depending on what kind you need for the project.  Here are some of them:

Fluke Insulated Screwdriver Kit

When you’re troubleshooting electrical equipment with loose nails, it’s best if you have insulated screwdrivers instead of using ordinary ones. Normal DIY screwdrivers can’t protect you from electric shocks. And boy, believe us when we say you would want to have the utmost protection when you encounter those hazards. To recall, electrical shock, to some degree, can be very dangerous for a person that can lead to fatalities.

Nevertheless, when you use insulated hand tools, you’ll have a certain level of protection when you encounter major electrical shocks.

Key features:

  • Precision insulated screwdriver kit
  • 7 insulated screwdrivers: 2 square, 3 slotted, and 2 Phillips
  • Certified to 1000 V ac, 1500 V dc to keep you safe
  • Ergonomic handle adapts to user to cause less strain and max torque
Fluke Insulated Screwdriver Kit

Fluke 87V IMSK Industrial Multimeter Service Combo Kit

This kit includes one of the widely used industrial digital multimeters in the world.  just let you efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations, With the use of a digital multimeter, you can confidently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations. As if that’s not impressive enough, this kit also comes with extra add-ons that you don’t usually find in singular purchases.

Key features:

  • Fluke-87V Multimeter has True-RMS accuracy and advanced functionality to give you the results you need.
  • Fluke-i400 AC 400A Current Clamp turns the 87V into a clamp meter.
  • Select accessories like temperature probe, test leads, and alligator clips included.
Fluke Industrial Multimeter Service Combo Kit

Fluke 287 FlukeView® Forms Combo Kit

One of the key functions of the FlukeView Forms Combo Kit is maximizing the time of every maintenance professional by being able to track down elusive, intermittent problems or monitor equipment with any of its functions. Moreover, have the convenience of storing your data reading into the device itself.

Don’t feel limited by its functions since this combo kit comes with multiple accessories that include:

  • Fluke-287 True-rms Electronic Logging Multimeter with TrendCapture
  • FlukeView Forms Software and cable
  • 80BK-A Thermocouple Probe
  • The CAT III 1000 V 10 A Modular test leads (red, black)
  • CAT II 1000 V 10 A Modular test probes (red, black) and caps
  • CAT III 1000 V 10 A Alligator Clips (red, black)
  • C280 Soft Case for meter protection and accessory storage
  • Amp Jack Plug Set
  • TPAK Magnetic Meter Hanger for Hands Free Operation
  • Requires Fluke ir3000 FC InfraredConnector for Fluke Connect communication (not included with this kit)
FlukeView Forms Combo Kit

Get yours from a trusted distributor!

Presidium PH is an authorized distributor of Fluke Maintenance tools in the Philippines. So, if you’re looking for a combo kit that will suit your needs or your next project, this is the one-stop-shop to go!

Read more
,

Fluke Maintenance PH: The Best Tool For Hybrid Vehicle Upkeep

What is a Hybrid Vehicle?

To put it plainly, hybrid cars are powered by electricity and gas. This kind of vehicle has the dual purpose of using an electric motor together with gasoline to get the car moving. Additionally, its system also captures energy through regenerative braking.

Furthermore, this vehicle has the liberty to switch from running on an electric motor to running on a gas engine. We know what you’re thinking, can they also work together at the same time? The answer is, yes. Combine both of these elements together to make a fully functional vehicle, and what do you get? A better car for the environment and a blend of good performance and efficiency for everyday use.

While this is all very interesting, let’s get into details of what you should know about the upkeep of Hybrid Vehicles.

What is the difference between Hybrid Vehicles and regular cars?

You might be questioning what’s the difference between a hybrid vehicle and a regular car. Although both types of cars have their pros and cons, they are also very different in nature. With hybrid vehicles, since both gas and electricity are working together, it is tagged as an environmentally friendly car. Not to mention the most cost-effective since it runs on dual power (not very cost-effective with repairs though).

On the other hand, regular cars run on gasoline and diesel engines. Unlike hybrid vehicles, regular cars are tagged as one of the heaviest root causes of pollution. Not only does it puff toxic chemicals, but it also causes fuel leaks and engine noises. Although, regular car repairs are a far cry from costly compared to hybrid ones. Ultimately, cars will be cars, and the major difference between driving a hybrid vehicle and a regular car is what type of power they use under the hood to keep the car going.

Fluke Maintenance: Top issues of owning a Hybrid Vehicle

No matter how luxurious or how “good performing” a vehicle is, there will always be faults, disadvantages, and shortcomings especially in the long run. Daily usage can lessen a car’s performance. However, your car’s performance over time is not the only thing you should take into account. Hybrid vehicles are known to be one of the advanced car technologies of today. Hence, you should also know how to maintain its overall production.

Here are some of the top issues that you’ll likely face when you decide to own a hybrid vehicle:

  • Keep an eye on its batteries – Unlike regular cars, hybrid vehicles are known to consume batteries more rapidly. This is because of its dual feature of running on electric motors and gas engines. Therefore, this will require more frequent change of batteries than a regular car. One more thing! Hybrid batteries also have the tendency to be more costly than the regular, so watch out for those!
  • The thing about catalytic converters – One of the important aspects of owning a hybrid car is to regularly check old spark plugs, wire, oxygen sensors, faulty fuel sensors, and filters. One faulty error from these and this might lead to your hybrid’s issues on engine performance. Additionally, this will also cause major problems with the catalytic converter.
  • Oxygen sensors – One of the most important parts of your hybrid car’s maintenance is to regularly monitor your oxygen sensors. In such cases when your hybrid reaches high levels of oxygen in the exhaust signals, this can result in big issues with your hybrid’s gas mileage.
  • Evaporative emissions system – Is one of the repetitive repair issues that a hybrid faces. These can cause leaks that are known to be very difficult to troubleshoot. Furthermore, if check engine lights are on, it is advisable for you to have an appointment to have it checked immediately

Fluke Maintenance: The upkeep for Hybrid Vehicles

The Fluke Deluxe Automotive Multimeter is a complete investment. Find these faults in advance with the use of this innovative device. The Fluke Automotive Multimeter has measurement functions, troubleshooting features, and accuracy levels needed to solve problems on conventional and hybrid vehicles. All multimeters are a spectacle at work, especially with troubleshooting complex machines. However, the Automotive Multimeter is pushing limits with very notable innovative features:

  • It can measure voltage up to 1000 V AC and DC
  • Can measure current up to 10 A, 20 A for up to 30 seconds and frequency to 200 kHz and % duty cycle
  • Allows you to do temperature measurements with an optional temperature probe.
  • Features an analog bar graph to track changing or unstable signals.
  • Min/Max/Average recording with Min/Max Alert to capture variations automatically.

Have the confidence to drive your hybrid in style knowing that everything is in perfect working condition. The Fluke maintenance tools such as the Fluke Deluxe Automotive Multimeter will do the dirty work for you, when necessary, issues with your hybrid are resurfacing.

Get one of your own from a trusted Fluke distributor: https://presidium.ph/

Read more
, , , ,

5 Ways on How Air Leaks Can Cause Destruction to Equipment

What makes air leaks so bad? 

Don’t underestimate the power of air especially when it’s leaking! When it comes to machines and equipment, such seemingly innocent leaks can actually cause more damage when not detected beforehand. In worse-case scenarios, air leaks can cause downtimes and performance issues that can drag an entire production down. 

Did you know that if an air leak is not detected in advance, this can literally make money fly with a snap of a finger? To give you a brief idea, we’re talking about 6,000 EUR for a single 3mm leak for a year! Just think how much money could be saved when these little critters are detected in advance.

Therefore, investing in a good-performing maintenance tool is a must especially if you’re running big establishments. The Fluke ii900 Industrial Imager is built and designed to detect compressed air which makes them the perfect tool to detect air leaks even in big spaces.

What makes Fluke unique from others in the market?

It doesn’t just make maintenance of people’s jobs easier, but it also features great innovative functions. This tool has 64 directional microphones that can detect soundwaves given off by a leak that is overlaid on top of an image taken through the Fluke ii900 Industrial Camera. To top it off, this device can even detect leaks for up to 50 meters. You can easily walk around big facilities and detect even the smallest ones.

Moreover, this is also very beneficial if you’re performing rounds in hazardous environments. Feel safe and confident when resolving technical issues in the most rugged places. This device will give you the security of troubleshooting long distances. Its ability to reach far places ensures that your team or the person in charge doesn’t need to perform drastic measures to get the job done.

How do air leaks cause destruction on equipment?

Let’s get into detail on how air leaks cause havoc in different kinds of equipment. Here are some examples:

Air Leaks In Steam Systems

An expensive undertaking once leaks hit steam systems. Steam systems are usually found in establishments build for industrial use. You might think that steam is easy to make, but on the contrary, steam is actually expensive to produce. If you notice, factories and other industrial spaces are often inaccessible. The mere fact that it is not often visited by people also poses a challenge making it difficult to identify underlying issues.

The most common knowledge about air and gas leaks is that it is extremely hard to detect especially when you’re not using any equipment. Issues with steam systems alone show that they can happen in more than one place. Additionally, you should also consider the size of the place since it will prove to be more of a challenge to locate these minuscule discharges. 

Places to look for air leaks in steam systems:

  • Pipe fittings
  • Valves
  • Steam traps

With the use of the Fluke ii900 Sonic Industrial Imager, you can easily identify these and other types of air or gas leaks to keep your systems up and running efficiently.

Robotics Leaks Impact Product Quality

Robotics in factories can also experience leaks. Here, we’re going to specifically talk about pick and place robots. To summarize, these kinds of factory robots’ purpose are just to literally, pick and place things (depending on what the factory is producing). Now, one of the parts of these robots is suction cups and actuators. If these parts are weak the robots may have the tendency to drop or misplace the objects they’re carrying. 

Basically, if this happens, and leaks are not detected beforehand, it’s going to cause more damage since product quality relies on these robots to get the job done. However, with the use of a Fluke ii900, situations like these can be easily prevented. Just think about checking these robots for leaks one by one. A process like that can eat time like a beast. But with an innovative device in your beck and call, you can perform troubleshooting rounds in a timely manner and with ease.

Outdoor Holding Tank Leaking Expensive Gases

The thing with outdoor holding tanks is that it’s more exposed to harmful environmental elements. Usually, holding talks is piped into the facility to power the production process. Another part of outdoor holding tanks is Argons. These are the huge tanks holding gas inside them. Coincidently, these tanks are also susceptible to leak. Keep in mind that once these things leak, money leaks with them as this kind of equipment are also costly to have. Just imagine not spotting these leaks beforehand. It’s literally going to punch a hole in bank accounts.

Pressure Regulator Corrosion

Process regulators usually contain compressed air, nitrogen, and carbon dioxide. Naturally, when process regulators start malfunctioning, and you can’t pinpoint the exact location where things are going wrong, expect that things might turn downside. As a result, this might cause the pressure regulator to corrode. And once pressure regulators corrode, they can no longer be in use. 

Don’t wait for corrosion to happen. The Fluke ii900 can pinpoint even the smallest of leaks in pressure regulators. Having this device can ultimately improve downtime and quality of work. 

Air Handler Ducting Leaks in Gaskets and Fasteners

Mainly, gaskets and fasteners are the tools used to attach big pieces of machinery together. No matter how small or frail they look, make up for the use they have when keeping parts attached. The downside? They are one of the main causes of air/gas leaks. Once these gaskets or fasteners are loose (or missing), this can have disastrous effects on the entire plant. How bad are we talking about? Leaks with gaskets and fasteners have the potential to shut down the plant or cause environmental discharge. 

Get the best of the best!

Presidium PH is the #1 Fluke distributor in the Philippines. There is a wide selection of Fluke tools for you to choose from! No doubt, all of them are the best performing in the market. Moreover, get to know more about their cool functions and other applications. You might be surprised how Fluke is raising the bar for test tools in the Philippines. 

Read more
, ,

Fluke Maintenance Tools: The Future of Renewable Energy

We are living in an ever-changing world where innovation is not slowing down. People always look to the future for new and exciting things to try. In this regard, it’s technology that holds the number one spot in terms of advancement. 

However, it’s no secret that it’s also the top cause of pollution and the degradation of the earth. Mobile phones alone actually contain harmful toxins when discarded. Ultimately, these devices (and others) have the ability to contaminate groundwater and soil; two of the most vital elements keeping nature alive. In the long run, if these toxic technological innovations are not remedied, it’s continuously going to destroy our lands.

Because of the sudden surge of technological waste, professionals are now trying to promote clean and sustainable energy. One of them is Wind Power and Solar Energy. These technological advancements are believed to be the future of electricity. And what better way to maintain these devices than the most trusted Fluke Maintenance Tools in the market.

What is renewable energy?

The future of energy is looking golden. As we try not to wreak havoc in the natural movements of things, experts have found a way to sustain the richness of nature by using it as the main conduit of electricity and power. That is renewable energy. 

Advantages of using renewable energy.

One of the most prominent advancements in the industry is wind energy and solar energy. Not only is it benefiting the industry and the world’s natural resources, but it is also benefiting the people in more ways than one. Here are some of its notable advantages:

Wind power and solar energy are cost-effective.

Wind doesn’t just benefit us by blowing cool air on our faces on a hot day, but it can also give us the most needed necessities in our day-to-day lives, which is electric energy. This kind of renewable energy is actually recognized as one of the low-priced energy sources that are currently available. Ultimately these giants use the wind to convert energy produced by the movement of wind turbine blades to power establishments and other spaces. The bottom line is, the wind is free. As long as you got wind, then you can get energy. 

Meanwhile, solar energy is also one of the most in-demand tools of the current date that many households have decided to install. This is because it is also one of the most cost-efficient devices for you to power up your systems. Not only is it low-cost but it is also tagged as one of the low maintenance sources of power you can get your hands on. The only thing you have to do to maintain it is to keep it clean.  

It’s a clean fuel source.

When we say that these tools are the ultimate eco-friendly resources to produce energy, we weren’t kidding. Compared to power plants, wind power and solar energy does not omit the combustion of fossil fuels, coal, natural gas, nitrogen oxides, and other harmful elements. Moreover, these technologies also do not cause atmospheric emissions that cause acid rain, smog, or greenhouse gases. Instead, it solely relies on wind and the sun to create energy.

Wind and solar power create jobs.

With technology as big and vast as this, you would need to have a lot of people maintaining it and technically, keeping it alive and going. Therefore, it has also become one of the fast-growing careers in terms of manufacturing, installation, maintenance, and supporting services by 2050 according to the Department of Energy.

Common disadvantages:

  • Spinning turbines can kill flying birds
  • Bats have also been killed by turbine blades
  • It can be a bit noisy
  • Can be a photobomber in most aesthetic landscapes (unless you think otherwise)
  • The installation process might be costly
  • Weather dependent
  • Uses a lot of space

Fluke tools are the future of renewable energy.

The best maintenance tools in the market come in the many forms of Fluke Tools. In a nutshell, Fluke tools are the most advanced test tools in the industry that can capture, diagnose, and make solutions to the most challenging technical difficulties maintenance men can encounter. 

Wind and solar power do make matters easier in terms of sustainable energy. Yes, they basically only need natural resources, such as sunlight and wind to function, but that doesn’t mean that they no longer need maintenance themselves. These technologies actually need regular maintenance checks and the best tools to perform these rounds are with Fluke Tools. 

With a wide selection of the best troubleshooting and maintenance devices, this is your one-stop-shop for all your device needs when it comes to caring for wind and solar energy tools. When we’re talking about the future of sustainable energy, ultimately, we also need to think about the tools we need to sustain and care for them and this entails the best performing tools in the industry which is Fluke tools. 

Get them from a trusted distributor in the Philippines: https://presidium.ph/

Read more
,

Best Fluke Clamp Meters For Industrial Use

Clamp meters are widely saturated because of their convenient and safe measurement functions. Believe it or not, without these innovative test tools, people would still be cutting wires and inserting test leads into the circuit to take an in-line current measurement. But this is old news. Thanks to advanced technology, people no longer need to perform drastic operations, when they want to make safe measurement rounds. These clamp meters for industrial use, prove to be a significant tool to every maintenance man or technician.

To this day, a lot of industries are in need of good functioning machines, wires, panels, and a lot more. Evidently, they need a tool that can perform well under pressure even in the roughest environments. This is where the expertise of clamp meters comes in. Basically, clamp meters are digital multimeters with current sensors. Ultimately, this combination makes them one of the most remarkable tools when you need to measure high current applications.

With Fluke Clamp Meters for industrial use, measurements are done quickly and safely without interrupting the flow of current and without the need for test leads. Now, let’s get to know the best fluke tools for industrial use!

Mostly, this is what your clamp meter consists of…

You could probably spot a clamp meter amongst other fluke devices simply because of its iconic red clamp situated at the top of the device. Yes, every clamp meter is different, but these features will most likely be present in each of them.

  • Transformer Clamps – It senses the magnetic field of the current flowing through the conductor.
  • Clamp Opening Trigger – It is used to open the clamp on top.
  • Power Switch – It simply turns the device on and off.
  • Back Light Button – Its function is to light up the LCD display for easier reading when you’re doing operations in the dark or at night.
  • Hold Button – Used to hold the last value on the display.
  • Negative / Ground Input Terminal – For connectivity purposes, it is used to join the negative/ ground jack of the meter cable.
  • Positive Input Terminal – Used to connect the positive jack of the meter cable.
  • LCD Display – It displays the measured value.
  • Functional Rotary Switch – It is used to select the type and range of current being measured.

Clamp Meters for Industrial Use

The Fluke 355 True RMS AC/DC Clamp Meter for industrial use is the perfect tool when you’re measuring up to 2000 amps. The Fluke 355 also showcases wide jaws that can easily clamp around large conductors typically found in high current applications. One of the most applauded features that this clamp meter has is its ability to measure AC/DC currents. Additionally, you can also take accurate peak measurements that can be taken using the in-rush current mode. This feature is ideal when measuring motors and inductive loads. The 355 also measures voltage and resistance, making this the most versatile tool for utilities, electrical contractors, and industrial service technicians.

Other notable features:

  • Quickly analyze readings using the MIN, MAX, and AVG functions.
  • Use the low-pass filter to smooth out noisy loads and stabilize readings.
  • CAT IV 600 V, CAT III 1000 V rating for added user protection.
  • A large backlit display allows for easy visibility in low-lit areas.
  • Use the display hold feature to capture readings even when the display cannot be viewed.

Fluke 376 True RMS AC/DC Clamp Meter with iFlex®

Expand Your Measurement Range with Increased Flexibility. You can measure around awkward-sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex®, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes.

Key features:

  • iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
  • CAT IV 600 V, CAT III 1000 V
  • True RMS AC voltage and current for accurate measurements on non-linear signals
  • Min, max, average and Inrush recording to capture variations automatically
  • Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings

Get one from a trusted distributor.

Presidium PH is one of the trusted distributors of Fluke tools in the Philippines. They have a wide selection of test tools and Fluke accessories to choose from on their website. Therefore, if you want to have the best Fluke troubleshooting tools for industrial use in your possession, get it from Presidium PH!

Read more
, , ,

Fluke Accessories: Tools That Can Make a Difference in Every Operation

Having the infamous yellow holstered Fluke tools is simply amazing to have in your beck and call. Still, no matter how great Fluke tools are, you can always add some “add ons” that can definitely make you and your tool perform well on the field. Of course, no doubt that Fluke items can perfectly perform well under high-pressure surroundings and in rough environments, but with the boost of these Fluke accessories, they might be able to do more.  

Simple as they may seem, some of these accessories are the key to protecting and making sure your Fluke items are well cared for in the field. Here are the Fluke accessories that can definitely make a difference in every operation you do.

Fluke High Voltage Probe

This is mainly used for digital multimeters. On the contrary, each digital multimeter actually includes a high voltage probe. At this point, you might be wondering why it proves to be useful. Well, probes with the help of digital multimeters can measure AC/DC voltmeter of 6000 V. This means that the probe can make measurements to televisions, photocopy machines, etc. These electronics are Category I of the CAT safety ratings. Nevertheless, though rugged and reliable these Fluke accessories are, they all have limitations as well.

These kinds of probes do not work well when measuring higher voltages on power distribution systems. Rather, it provides higher accuracy when a voltmeter having 10 megohm input impedance is used.

Fluke High Voltage Probe

Fluke Suregrip Insulated Test Leads

Another way of getting the most out of your multimeters is with the use of Suregrip Insulated Test Leads. Ultimately, test leads have the ability to enhance your measuring or troubleshooting experience in any environment. These sure grip test leads will give you an advantage of 1.5 meters of added length. Naturally, you wouldn’t have to worry about hard-to-reach test points anymore.

Moreover, these leads also sport a rubber over-molded surface that creates a much more comfortable gripping experience for the maintenance person using it. That’s not all it showcases; this fluke accessory also features right angles and straight connectors. This feature lets you have a variety of test lead configurations to overcome hard-to-reach areas.

Fluke Suregrip Insulated Test Leads

Fluke Intrinsically Safe Headlamp

Trust Fluke to have everything you need when you’re performing even the most difficult troubleshooting and maintenance operations in the dark. That’s right, our next Fluke accessory provides much-needed light when panels are located in dark corners. The Fluke Intrinsically Safe Headlamp can let you work with both hands while giving you ample light to work with.

Ultimately, Fluke’s reliability and ruggedness go beyond its products. They aim to provide a healthy and safe environment for maintenance professionals to work with. This is why Fluke headlamps are one of the most convenient lights to take with you whenever you’re performing on the field with little light to work with.

One of its main functions is secure gripping of your hardhat with adjustable features. You can adjust the temperature of the light from a high mode to a low mode.

Fluke Intrinsically Safe Headlamp

Fluke Hard Case

Durability at its finest. Fluke tools are the most rugged and reliable in the industry. It’s no secret that you can probably use them in the most stressful environments, and they would still deliver flawless performance. Nevertheless, that doesn’t mean that Fluke tools are indestructible.

This hard carrying case has the capacity to protect your device and at the same time carry all of your Fluke accessories with its spacious interior. These cases are built with tough polypropylene that includes a molded carrying handle and a snap-on lid. It also comes with diced foam inside to thoroughly protect your tools and their accessories. A definite must-have especially if you’re planning on traveling to far places with your fluke tools.

Fluke Hard Case

Fluke Meter Case

One of the most convenient cases Fluke has is its soft meter case. This kind of case is actually built for more rugged usage. When performing troubleshooting and measuring operations in tough environments, these are actually the ideal cases that your tools should be stored in. Hard cases might be “tougher” on the outside, but with the soft case, you’ll have protection and flexibility in both.

Additionally, the inside of the cade is actually very spacious and organized. It showcases a separate nylon pocket for accessories and the Fluke tool itself. The main exterior of the case also features a belt loop for hanging purposes. This feature lets you focus on the task without worrying about carrying other tools.

Fluke Meter Case

Get one from an authentic source!

We’re not going to lie, of course, your Fluke accessories can be stored in other cases or you could probably get some of the test lead and probes from a secondhand source. But still, nothing beats the durability and the performance of new accessories. It’s a sure-fire, good investment especially if you’ll be using them on a daily basis.

Presidium PH is an official distributor of Fluke accessories in the Philippines. Thus, if you’re interested in purchasing one of these amazing products, make sure to visit our website. You’ll have plenty to choose from to level up your Fluke items. Happy shopping!

Read more

Fluke Insulation Testers: How To Choose The Best One That Fits Your Needs

It’s a handy thing to have Fluke insulation testers at the back pocket of every maintenance or troubleshooting professional. However, are you sure that it’s the right insulation tester to get the job done?  Insulation testers are known to be a popular tool for machinery that prevents faults from occurring. It has the advanced capability of detecting machine imperfections ahead of time and this, ultimately, makes it an ideal tool for your voltage and current measurement needs.

 

Importance of insulation testing.

Are you familiar with pipe leaks? Or how about a balloon with a needle puncture? The bottom line is, both of these minor malfunctions have one thing in common. With pipe leaks, a bit of water will be dripping out (depending on how big the puncture is). On the other hand, with the punctured balloon, the small puncture will cause it to deflate little by little and lose its overall capacity to be in good working condition.

 

Basically, this is also what happens to wires. Although from the outside, a wire seems well protected, one shouldn’t be too sure. Wires contain currents. And at times, these currents don’t always flow perfectly. Sometimes, steady flows of energy can stray away from a perfect line.

 

Which leads us to the next question, how do we detect these malfunctions caused by the current? This is where insulation testers come into the picture.

 

Types of currents to watch out for.

Knowing the type of energy that flows into the wires you’re testing for also proves significance. Here, you’ll get to know three kinds of currents which are capacitive currents, absorption current, and leakage current. Let’s get to know each one up close.

 

  1. Capacitive currents – It is the process of collecting and storing energy from an electrical charge. Capacitors come in many forms. Energy storing devices are one of their popular reputations.

 

  1. Absorption current – Absorption current takes place when voltage builds up. Ultimately, when voltage goes to an all-time high, the insulation decreases. In return, this will create a gradual change that will reflect its storage of potential energy along with the insulation.

 

  1. Leakage current –  A number one case scenario of deteriorating insulation is a leakage in the currents. Additionally, this is also a result of a decrease in resistance.

 

 

Significant uses of Fluke Insulation Testers.

Insulation testers are particularly important to be used when new electrical machinery is being installed. This is to make certain that insulations are in good shape. Take note that testing should come before the installation. Using insulation testers before any operation is for the good of the machines and for the safety of personnel.

 

Furthermore, one of the most notable features of Fluke insulation testers is that they can download data for future reference testing. This is advantageous for maintenance professionals since this kind of feature saves time and saves us the hassle to keep documentation from every testing.

 

Choosing the best Insulation Testers.

Although insulation testers have one goal, we must keep in mind that each has its own specialty. Luckily, Fluke products have the best selection of Insulation Testers that are set to meet your needs. Take note of its prime features that you think will best get the job done.

 

  1. Fluke 1577 Insulation Multimeters

Insulation testers and multimeters combined as one? Now that’s one powerful tool. This Fluke insulation tester can provide maximum versatility for both troubleshooting and preventive maintenance. If you’re troubleshooting motor systems, electrical distribution, and production equipment, then this tool is the best one for the job.

 

Notable features:

  • Large display with backlight.
  • Insulation test (1587: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to 600 MΩ).
  • Insulation test voltages (1587: 50 V, 100 V, 250 V, 500 V,1000 V),(1577: 500 V, 1000 V) for many applications.
  • Live circuit detection prevents insulation tests if voltage > 30 V is detected for added user protection.
  • Auto-discharge of capacitive voltage for added user protection.
  • AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (Ω), Continuity.
  • Filter for motor drive measurements (1587 only).
  • Magnetic hanging system to free your hands for other work

 

 

  1. Fluke 1507 Insulation Resistance Testers

A tool is good to work in advanced industrial and electrical insulation testing. The Fluke 1507 Insulation Resistance tester has the capability to hold multiple test voltages that make it ideal for troubleshooting, commissioning, and preventive maintenance uses.

 

This handheld super tool will make it easy for every maintenance professional to perform quick and advanced insulation resistance testing. Furthermore, it’s lightweight in built which makes it easy to pack and use. Additionally, it sports innovative features such as remote probes. This will allow you to make cost-efficient repetitive testing on your machines and electronics.

 

Other notable features:

  • Performs insulation tests from 0.01 MΩ to 2.0 GΩ
  • Includes live circuit detection to prevent insulation test if voltage >30 V is detected.
  • Includes auto-discharge of capacitive voltage for added user protection.
  • Measures AC/DC voltage from 0.1 V to 600 V and resistance from 0.01 Ω to 20.00 kΩ.
  • Provides lo-ohms earth-bond continuity (200 mA)
  • Simplifies repetitive or hard-to-reach testing with the remote test probe
  • Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
  • Comes with a remote probe, test leads, test probes, and alligator clips.

 

Now you have the best choices for insulation testing right in front of you. Get your Fluke Insulation Testers from an official distributor: https://presidium.ph/product-category/products/fluke-industrial-group-tools/insulation-testers/

Read more

Importance of HVAC in A Workplace

Designed for those who are not familiar with the term HVAC, it simply stands for three things. These are Heating, Ventilation, and Air Conditioning. These three elements are what makes up for a comfortable room temperature. Ultimately, HVAC systems aim to improve the quality of the air you breathe. We may not notice it quite often, but HVAC systems are almost present wherever we go. It is present in our homes, in our workplaces, even the shopping malls we visit.

This leads us to the question; how does it improve the air we breathe? Simple, these three things are the constituents that are responsible for the hotness or coldness of a room. They also hold the power to control humidity or to dehumidify a room. To summarize, its main goal line is to help maintain adequate indoor air quality through proper ventilation with filtration to be able to provide thermal comfort.

How does HVAC benefit workplaces?

When we think of a workplace, the first thing that pops into our minds is an environment that’s easy, cool, and a space with a good ambiance. This kind of atmosphere is ideal for work. It can help boost an employee’s productivity, safety, and the overall mood for work. A workplace’s environment is one of the most important aspects of office workers. Ultimately, employees need a pleasant work atmosphere in order to function well throughout the day.

On the other hand, imagine a workplace with bad ventilation, either too hot (it’s going to make employees sweat), or too cold (employees will be shivering while working). It doesn’t paint a good picture, doesn’t it? Employees will either be too occupied tending to their own personal discomfort rather than working on their tasks.

This is why HVAC is an important aspect of a workplace. HVAC systems also contribute to the comfortability of every employee. Moreover, it allows occupants to have better performance gains, as well as health gains. Not only do HVAC systems make the atmosphere of the room more comfortable, but it also removes contaminants and dust from the air by using filters.

 

Different kinds of HVAC systems.

There are different kinds of tools and mediums that can help regulate the air in the room. HVAC systems also depend on what kind of environment you are living in. If you’re living or working in a place where it’s too cold, heaters are a better fit to balance the air in the room. Meanwhile, if you’re in a tropical place, it’s ideal to have air conditioning to make the place more comfortable.

To sum it up, HVAC systems come in different shapes and sizes. Here are some of them.

Heating Systems

These are instruments used to heat up space. Heating systems don’t just come in one shape, but there are different kinds to choose from. A furnace is a heating device that will run on gas or propane. On the other hand, boilers can function with the use of gas or oil to heat water. Meanwhile, with the use of a radiant floor, it has the power to heat any kind of concrete. This type of device is most commonly used at home. One type of heating system which we are all familiar with are fireplaces. These are mostly used as home decor; however, it is mostly saturated in homes that are located in places with chilly weather.

Cooling Systems

One of the most used tools to provide cool air is air conditioners. Take note that air conditioners come in different shapes and sizes. An air conditioner’s main purpose is to pull out cool air to ventilate the space. These devices are popularly used in homes that are located in tropical areas, office spaces, shopping malls, and different kinds of establishments. On the other hand, the use of evaporated coolers is also a popular choice for places with dryer climates.

Humidifiers

There are two types of humidifiers. One type are humidifiers which are used to add moisture to the air. And the second are dehumidifiers that are used to draw in warm air currents. These humidifying devices are options if heating systems and cooling systems are out of the picture. Ultimately, they still add quality into the air we breathe in a certain space.

Devices for HVAC system maintenance.

Fluke tools are one of the most rugged devices that are used for troubleshooting. However, these devices are also known to be flexible. Yes, they can withstand to work under pressure even in harsh environments. But ultimately, it can also save your device from early deterioration. This is because Fluke tools are best used at early detection of faults, not only in machinery, but in different kinds of devices.

In light of HVAC tools, Fluke can be a reliable tool for HVAC maintenance. Proven the fact that air quality plays a big role in workplaces. The best tools should also be used to maintain these systems.

The Fluke 985 Air Particle Counter

Is one of the most ideal tools to be used when detecting HVAC deficiencies. If you’re an HVAC maintenance professional, then you’re going to love this Fluke tool. One of the main contaminants of air quality comes from filters. However, with the use of the Fluke 985 Air Particle Counter, you could easily detect filter faults and air quality investigations.

Fluke 985 Particle Counter’s best features:

  • Ultra-lightweight and ergonomic design for easy single-hand operation.
  • Ten hours of standard-use battery life to last a full work day.
  • Data can be viewed in traditional tabular or trend graph at the user’s preference.
  • Configurable display, sample methods, and alarm setting for sample size count (raw count, per cubic feet, cubic meter, or liter).
  • Administrator password control (optional) for added security.

The Fluke 971 Temperature Humidity Meter

Is a tool that understands that one of the most important aspects of air quality maintenance is temperature and humidity. This is also the perfect tool for HVAC maintenance technicians and professionals who are specialized to perform indoor air quality checks.

Its main features include:

  • Compact and lightweight
  • Temperature ranges from -20 °C to 60 °C (-4 °F to 140 °F)
  • Measures dew point and wet bulb
  • Relative humidity from 5 % to 95 %
  • Min/Max/Avg Data hold
  • Low battery indicator

If you want to maintain the air quality in your workspace, get the best tools for it from your trusted Fluke distributor here in the Philippines:

Fluke 971 Temperature Humidity Meter

Read more