Fluke i30s AC/DC Current Clamp
The i30s current clamp is based on Hall Effect technology for use in the measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.
|Specified current range||30 mA to 30 A DC, 30 mA to 20 A AC RMS|
|Usable current range||5 mA to 30 A DC, 30 mA to 20 A AC RMS|
|Crest factor||1.4 in|
|Output sensitivity||100 mV/A|
|Accuracy (at +25C)||1% of reading 2 mA|
|Load impedance||> 100 kO|
|Conductor position sensitivity||1% relative to center reading|
|Frequency range||DC to 100 kHz (-0.5 dB)|
|Phase shift below 1 kHz||< 2|
|Temperature coefficient||0.01% of reading / C|
|Power supply||9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator|
|Working voltage (see Safety Standards section)||300 V AC RMS or DC|
|Maximum conductor size||19 mm diameter|
|Output connection||Safety BNC connector, supplied with safety 4 mm adapter|
|Output zero||Manual adjust via thumbwheel|
|Cable length||2 m|
|Operating temperature range||0C to +50C|
|Storage temperature range (with the battery removed)||-20C to +85C|
|Operating humidity||15% to 85% (non-condensing)|
|Safety||IEC 61010-1, Pollution Degree 2|
|IEC 61010-2- 032: CAT III 300V|
|Use of the probe on uninsulated conductors is limited to 300 V ac RMS or DC and frequencies below 1 kHz.|
|EMC Compatibility||IEC 61326-1: Portable Electromagnetic Environment|
- The i30s current clamp is based on Hall Effect technology for use in the measurement of both DC and AC current.
- The current clamp may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.
- Current range: 30 mA to 30 A DC, 30 mA to 20 A AC RMS
- Frequency range: DC to 100 kHz (-0.5 dB)
- CAT III 300 V safety rating
Lastly, for more details about the Fluke TiS60+ Thermal Camera, Download the Fluke i30s AC/DC Current Clamp datasheet.