Fluke 62 Max Infrared Thermometer - Presidium PH - Official Fluke Tools Distributor

Presidium PH | #1 Authorized Fluke Distributor PH

official fluke distributor ph

fluke philippines

fluke products philippines

where to buy fluke tools ph

maintenance tools ph

fluke industrial tools ph

fluke multimeter philippines

test tools philippines
fluke test tools ph

Presidium PH | #1 Authorized Distributor of Fluke Tools in the Philippines

official fluke distributor ph

fluke Philippines

fluke products Philippines

Where to buy fluke products Philippines

test tools Philippines

maintenance tools Philippines
fluke industrial tools ph
Sale!

Share

Share on facebook
Share on whatsapp
Share on twitter
Share on email

Fluke 62 Max Infrared Thermometer

8,844.19

(12% VAT Included)

DELIVERY:

EX-STOCK: within 7-10 days

INDENT ORDERS: 4-8 weeks

?Fluke IR thermometers are industrial grade. They are not substitutes for clinical thermometers.?

Available on backorder

Fluke 62 Max Infrared Thermometer

You can use the Fluke 62 MAX to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents. It is small in size and extremely easy to use. The single laser helps you pinpoint the target for more accurate readings and makes it easier to measure temperatures in hard to reach areas.

Key features

  • Highly accurate infrared thermometer for measuring temperatures from -30?C to 500?C (-22?F to 932?F) accurate to +1.5?C or +1.5% of reading (whichever is greater)
  • Provides a 10:1 Distance to spot ratio
  • Offers single laser targeting for accurate and repeatable measurements
  • Features IP54 rating against dust and moisture

Other useful features:

  • High and low alarms for rapid detection of temperatures outside the limits
  • Powered by a single, standard AA battery.
  • Comes with a three-year warranty -30-
  • Withstands a 3 m (9.8 ft.) drop
  • Offers small, lightweight form factor to clip comfortably to your tool belt or belt loop, or easily fit in your tool box
  • Features a large, backlit display to make data easier to read, even in dark areas.
  • Displays Min/Max/Avg/Dif: the minimum, maximum or average temperature, or the difference between two measurements
Specifications
Temperature range -30?C to 500?C (-22?F to 932?F)
Accuracy ?1.5?C or ?1.5% of reading, whichever is greater
-10?C to 0?C: ?2.0
-30?C to -10?C: ?3.0
Response time (95%) < 500 ms (95% of reading)
Spectral response 8 to 14 microns
Emissivity 0.10 to 1.00
Optical resolution 10:1 (calculated at 90% energy)
Display resolution 0.1?C (0.2?F)
Repeatability of readings ?0.8% of reading or < ?1.0?C (2?F), whichever is greater
Power AA battery
Battery life 10 hours with laser and backlight on
Physical Specifications
Weight 255 g (8.99 oz)
Size 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)
Operating temperature 0?C to 50?C (32?F to 122?F)
Storage temperature -20?C to 60?C (-4?F to 140?F), (without battery)
Operating humidity 10% to 90% RH non-condensing at 30?C (86?F)
Operating altitude 2000 meters above mean sea level
Storage altitude 12,000 meters above mean sea level
IP rating IP 54 per IEC 60529
Drop test 3 meters
Vibration and shock IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
EMC EN 61326-1:2006 EN 61326-2:2006
Standards and agency approval Compliance EN/IEC 61010-1: 2001
Laser safety FDA and EN 60825-1 Class II

 

DISCLAIMER

All products shown in this webpage are representations only of the products wished to be promoted. It may vary color and size in actual appearance. Specifications of the use of the Fluke products can be found in the brochures that accompany each product and/or those found in the official website of Fluke.
The prices of the Fluke products are those indicated herein and they are true and correct as of the time they were published. Prices may change without prior notice.
Fluke products are designed for very specific and special purpose(s) and shall not be used for any purpose other than those expressly set forth in applicable Fluke product documentation. The registered trademark, marks, logos of Fluke products including patent, copyright, and other propriety rights belong to them exclusively.
Warranty of the products sold in this website are subject to certain and specific conditions which must be identified and known to the buyers prior to the purchase.
All rights reserved.

RETURN & REPLACEMENT POLICY

HOW TO PURCHASE: To place an order, you will be required to fill out the order form legitimately and press the “Add to cart / check out” button to submit your order. After this, you will receive an e-mail from us acknowledging that we have received your order.
AVAILABILITY OF PRODUCT: All orders for products are subject to availability.
SHIPPING: Customers will be responsible for paying for their shipping costs for deliveries. Shipping costs are nonrefundable. Orders placed on Friday will be processed and shipped the following Monday.
NO REFUND POLICY
PRODUCT QUALITY CONCERNS: Product that is unusable due to reasons related to Product quality arising out of the manufacturing of the Product.
PRODUCT DEATH ON ARRIVAL (DOA): Product that purchased is defective once arrived.
REPLACEMENT POLICY: We only replace product if they are defective or damaged. In circumstances where you consider that a product is defective, you should promptly contact us at • +632 84590167 • +632 82570795 • +632 82515165 or email us at info@presidium.ph with details of the product and the defect.
RETURN POLICY:
  • You must notify us thru email or contact us if you wish to return or replacement of the product.
  • You have 7 calendar days to return an item from the date you received it.
  • To be eligible for a return, your item must be unused and in the same condition that you received it.
  • Product must be in original packaging, including instruction manuals and all accessories. Product must be unused and in original condition.
  • Item needs to have the receipt or proof of purchase.
  • Your item would be subject for checking of our Technical support before replacement.
CONTACT: If you have any queries regarding these terms and conditions, please contact us at • +632 84590167 • +632 82570795 • +632 82515165 email us at info@presidium.ph