Calibrate a wide range of pressure gauges and sensors from very low pressure to 3000 psi with this reliable, easy-to-maintain pressure calibrator
- Unsurpassed?rangeability?in one pressure controller / calibrator: install up to five measurement modules with uncertainty as good as 0.01% reading from 30% to 100% of the modules’ span.
- Configure for today’s requirements,?expand?later as your needs change and grow. Add modules to increase the pressure range or accuracy in seconds, without needing to return the instrument to the factory.
- Optional?contamination prevention?system helps you avoid risk of contaminating your pressure standard when calibrating hydraulic devices.
Calibrate a wide workload?quickly, accurately, dependably
The 6270A features pressure ranges from low differential pressure to 20 MPa (3000 psi), which covers the requirements of most gauges and sensors. Three levels of accuracy, 0.02 % FS, 0.01 % reading from 50% to 100 % or 0.01 % reading from 30 % to 100 %, let you balance your need for accuracy with the limits of your budget.
Thanks to its modular design, the 6270A is flexible enough that you can install modules with different accuracy classes within the same chassis. You can buy the highest level of accuracy for the pressure ranges that require it and a lower, more economical level of accuracy where applicable.
The 6270A?s accuracy specifications are provided in full and supported by a Technical Note that details its measurement uncertainty, so you know exactly what you are getting. As with all Fluke Calibration instruments, these specifications are conservative, complete, and dependable.
|Power requirements||100 V ac to 240 V ac, 47 Hz to 63 Hz|
|Fuse||T2A 250 V ac|
|Max power consumption||100 W|
|Operating ambient temperature range||15 ?C to 35 ?C|
|Storage temperature||-20 ?C to 70 ?C|
|Relative humidity||Operating: <80 % to 30 ?C, <70 % to 40 ?C, <40 % to 50 ?C|
|Storage: <95 %, non-condensing. A power stabilization period of four days may be required after extended storage at high temperature and humidity.|
|Altitude (operation)||<2000 m|
|Ingress protection||IEC 60529: IP20|
|Safety||IEC 61010-1, Installation Category II, Pollution degree 2|
|Weight (Chassis only)||13 kg (28.5 lbs)|
|Dimensions||Height: 147 mm (5.78 in)|
|Width: 454 mm (17.79 in)|
|Depth 488 mm (19.2 in)|
|Rack mount dimensions||3U-19 inch rack|
|Warm up time||15 minutes after power up or module installation, when items previously stored within Operating Ambient Temperature Range.|
|Calibration||ISO/IEC 17025 accreditation|