How To Prevent Overheating Electrical Panels Using Fluke Tools! - Presidium PH

Presidium PH | #1 Authorized Fluke Distributor PH

official fluke distributor ph

fluke philippines

fluke products philippines

where to buy fluke tools ph

maintenance tools ph

fluke industrial tools ph

fluke multimeter philippines

test tools philippines
fluke test tools ph

Presidium PH | #1 Authorized Distributor of Fluke Tools in the Philippines

official fluke distributor ph

fluke Philippines

fluke products Philippines

Where to buy fluke products Philippines

test tools Philippines

maintenance tools Philippines
fluke industrial tools ph

How To Prevent Overheating Electrical Panels Using Fluke Tools!

Let’s give a brief background on why electrical panels are important to every household, or to every establishment in general. This little rectangular box holds the power to every electrical aspect of buildings and houses. We know it can seem a bit intimidating to look at but once you get the hang of it, it’s straightforward. Let’s just say that without electrical panels, you won’t be able to have control over electricity in certain areas of your home (if you’re a homeowner) or establishment (if you’re a maintenance professional).

Whether it be on buildings, homes, industrial plants, or in any area that requires electrical power, they will never be alive without electrical panels. So, regarding their importance, what would now happen if you had a faulty electrical panel in your midst, or worse, an overheating one? Here’s how you can resolve them with early detection using Fluke tools!

Reasons for overheating electrical panels

Initial, don’t be confused. All electrical panels may feel a bit warm since electrical currents run through them. There is a difference between a warm electrical panel and an overheating one. Remember, each circuit breaker is assigned to one current flow. Take a house, for example, one current flow (that is aligned to a breaker) may be connected to the bedroom, another can be connected to the kitchen, and so on.

Take note that circuit breakers also have ratings. So, if it exceeds that rating, it will also be a cause of a warm-up. However, these are not the only reasons why your panels are heating up. Here are some more probable reasons why they are overheating…

It might be a case of a loose connection.

Watch out for loose connections as this can generate heat. Loose connections often happen with the breakers. You see, when installing these little switches inside the electrical panel, you need to make sure that it is secured with the clip that holds them to the bus bar. If all else fails, maybe you need to bring out your screwdriver and tighten the lug that holds the breaker.

Current limits may also be in the works.

Keep in mind that electrical panels consist of multiple currents in different breakers, therefore, when one of those currents exceeds their rating then there might be a “trip” to the current flow breaking electricity. This can be a cause of power-hungry appliances. And, more often than not, when such appliances are often turned on and off, this can cause distress on your breaker. A simple solution would be to reset it. Switch it off, and switch it back on.

Faulty breakers also make electrical panels to overheat.

How do you know if one of your breakers is bad? An indication can be flickering lights or if your power is not working continuously in certain areas of your place. These are some of the signs that you have a bad breaker on your hands. If in such circumstances you’ve had your breakers replaced and are still experiencing the same thing, then it might be high time to upgrade to a modern panel.

Fluke tools to use for preventive measures and safety.

The iconic yellow holstered tools are a phenomenon in the industrial department. They are the best test tools that are highly recommended by professionals and maintenance men/women alike. They are not only known for their safe testing features but they are also well-applauded for their accurate performance. People working with Fluke tools in hand can operate more confidently, quickly, and safely, especially when working on highly sensitive projects. But that’s not all, Fluke tools are also praised because they can prevent all kinds of faults from a wide variety of tools, machines, electrical equipment, and even devices.

Considering preventing the overheating of electrical panels, Fluke tools can play a big role in determining faults in advance. Considering that most of these faults cannot be seen by our own eyes and might be too dangerous for us to inspect by hand, Fluke tool comes to the rescue with its high-performing tools. Here are some of the Fluke tools that can be an asset in the preventive maintenance of overheating electrical panels…

  1. Fluke Insulation Testers – They can be efficient in measuring phase-to-phase or phase-to-neutral voltage.
  2. Fluke Clamp Meters – They are good for measuring currents and looking for current harmonics.
  3. Fluke Energy Analyzers – These Fluke tools are great for monitoring voltage, harmonics, and load.
  4. Fluke Thermal Imagers – The preferred tools for spotting hot and cold spots.
  5. Fluke 1735 Three-Phase Powe Logger – They are great for measuring currents.
  6. Fluke 1587 Insulation Multimeter – They are perfect for measuring voltage and voltage drops.
  7. Fluke Insulated Tools – If you need to tighten bolts, make sure to use insulated tools for extra safety from harmful electricity.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Sources:

Leave a Comment

Your email address will not be published. Required fields are marked *

DISCLAIMER

All products shown in this webpage are representations only of the products wished to be promoted. It may vary color and size in actual appearance. Specifications of the use of the Fluke products can be found in the brochures that accompany each product and/or those found in the official website of Fluke.
The prices of the Fluke products are those indicated herein and they are true and correct as of the time they were published. Prices may change without prior notice.
Fluke products are designed for very specific and special purpose(s) and shall not be used for any purpose other than those expressly set forth in applicable Fluke product documentation. The registered trademark, marks, logos of Fluke products including patent, copyright, and other propriety rights belong to them exclusively.
Warranty of the products sold in this website are subject to certain and specific conditions which must be identified and known to the buyers prior to the purchase.
All rights reserved.

RETURN & REPLACEMENT POLICY

HOW TO PURCHASE: To place an order, you will be required to fill out the order form legitimately and press the “Add to cart / check out” button to submit your order. After this, you will receive an e-mail from us acknowledging that we have received your order.
AVAILABILITY OF PRODUCT: All orders for products are subject to availability.
SHIPPING: Customers will be responsible for paying for their shipping costs for deliveries. Shipping costs are nonrefundable. Orders placed on Friday will be processed and shipped the following Monday.
NO REFUND POLICY
PRODUCT QUALITY CONCERNS: Product that is unusable due to reasons related to Product quality arising out of the manufacturing of the Product.
PRODUCT DEATH ON ARRIVAL (DOA): Product that purchased is defective once arrived.
REPLACEMENT POLICY: We only replace product if they are defective or damaged. In circumstances where you consider that a product is defective, you should promptly contact us at • +632 84590167 • +632 82570795 • +632 82515165 or email us at info@presidium.ph with details of the product and the defect.
RETURN POLICY:
  • You must notify us thru email or contact us if you wish to return or replacement of the product.
  • You have 7 calendar days to return an item from the date you received it.
  • To be eligible for a return, your item must be unused and in the same condition that you received it.
  • Product must be in original packaging, including instruction manuals and all accessories. Product must be unused and in original condition.
  • Item needs to have the receipt or proof of purchase.
  • Your item would be subject for checking of our Technical support before replacement.
CONTACT: If you have any queries regarding these terms and conditions, please contact us at • +632 84590167 • +632 82570795 • +632 82515165 email us at info@presidium.ph