Importance Of Measuring True RMS

Electricity is an exact science. One miscalculation may lead to a catastrophe. Thus, it is important to measure it all regularly and accurately. We need the accurate measurement of the current to indicate the amount of the load and the condition of the load. Let’s learn about True RMS and how is it beneficial to us.

Dangers of miscalculating or not measuring True RMS

True RMS is the average of the set of values in which we measure alternating current. True RMS is helpful in giving us an idea of the capacity of the appliances when we plug them in. It is important to note the voltage needed by an appliance to work and the current capacity of the outlet. They must fit each other to avoid problems. Measuring the True RMS will also allow us to maintain our electricity sources.

Overheating of devices.

Overheating is caused by going beyond the capacity that a device can hold. Most of the time, overloaded circuits cause this. You might smell something burning, or see smoke, or worst case – fire.

 Here are tips to avoid overheating.

A.1. Do not use too many power strips.

A.2. Check your wiring.

A.3. Check your appliances too.

A.4. Find the source of your problem.

Malfunction of devices.

When the device does not receive the True RMS value it needs to function, it won’t work. For example, suppose a refrigerator needs 220 V of electricity. And you plug it in a source whose RMS is only 110 V. It does not contain enough current to power keep the refrigerator going.

How do you avoid these dangers?

Accidents do happen, yes. But you can act before it happens! Here is a list of safety precautions you must do to avoid the dangers mentioned above.

  1. Have your devices checked regularly. It is important to maintain your devices to monitor their conditions. Early problem detection is the key to avoiding further damage. Addressing the problem right away will help you find a solution right away.
  2. Stick to the calculated True RMS of the devices. Do not attempt to go beyond or under the True RMS measurement of your device. Sticking to the True RMS value will ensure that your device will work properly and will last you a long time.
  3. Do not overuse your devices. Everything gets worn out if it is used continuously without any break. Let your devices rest too.
  4. Do not use worn-out cords. Worn-out cords can expose the live wire which can be extremely dangerous to come in contact with. Either you get electrocuted, or you set fire.
  5. Do not leave your devices plugged in when not in use. These devices must rest too. When they are not used, the plug can still release a certain amount of heat. And it might cause the device to overheat.

 What Fluke devices to use to measure True RMS?


 Ever wondered which tools will help you measure the True RMS? Here is a list of Fluke Tools for you! Known for its accuracy and reliability, Fluke Tools ensure the safety of your place. Here are some of the Fluke tools that will help you with your RMS concern.

1. Fluke 179 Digital Multimeter

This digital multimeter has manual and automatic ranging. It can measure 1000 volts of AC (Alternating Current) and DC (Direct Current). This robust, fast and accurate multimeter has a backlit digital display with an analog bar graph and built-in temperature measurements and thermocouple!

Fluke 179. Photo from Fluke.com

2.  Fluke 117 Electrician’s Multimeter with Non-Contact Voltage

This compact True RMS digital multimeter is made for electricians. Its non-contact feature keeps you safe when detecting True RMS. Designed to be carried anywhere from commercial buildings to hospitals and even schools! This compact multimeter provides measurements for resistance, continuity, frequency, and capacitance.

Fluke 117. Photo from Fluke.com

3. Fluke 120B Series Industrial Scope Meter handheld Oscilloscopes

This oscilloscope and multimeter have connect and view trigger for hands-off operation. This device simplifies testing but gives you more information about your device.

Fluke 120B. Photo from Fluke.com

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Sources:

https://www.fluke.com/en-ph/product/electrical-testing/portable-oscilloscopes/120b

https://www.fluke.com/en-ph/product/electrical-testing/digital-multimeters/fluke-179

https://www.fluke.com/en-ph/product/electrical-testing/digital-multimeters/fluke-117

https://www.fluke.com/en-ph/learn/blog/electrical/what-is-true-rms

https://www.artplumbingandac.com/electrical/why-is-my-electrical-outlet-warm/#:~:text=The%20most%20likely%20problem%20causing,heat%20in%20an%20electrical%20outlet.

https://yeobuild.com.sg/tips-how-to-avoid-appliance-overheating/

https://www.fluke.com/en-ph/learn/blog/electrical/what-is-current#:~:text=Amperage%20measurements%20are%20normally%20taken,to%20cause%20electrons%20to%20move.

Read more
, , , , , ,

Maintenance Management is Keeping the World Up and Running (Here’s Why!)

maintenance-management-is-keeping-the-world-up-and-running

Going the extra mile to make sure your machines and devices are running smoothly can reap rewards in the long run. Many don’t know it, but maintenance management is a key factor in helping keep the industry up and operating. Without daily maintenance checks, a lot of machines and devices may be susceptible to faults and other malfunctions. This alone might negatively impact the productivity of workers and put a wedge on their day-to-day processes.

Just imagine if important assets suddenly shut down. Take the internet as an example. Nowadays, if your internet provider experiences any hiccups, a whole population is affected by it, with their work, school, entertainment, and a lot of other things. It’s quite obvious that people hate experiencing downtimes.

This also applies to valuable assets. Unwanted machine/device breakdowns are unforgivable especially if you need to meet certain schedules or if the machine on hand is responsible for providing power. Technically, this only highlights how important maintenance management is especially if we’re living in a machine-dependent economy. So, let’s go in-depth into just how maintenance management keeps the world up and running and how we benefit from it.

Why everyone should practice maintenance management.

Maintenance management deals with caring about the performance of every industrial tool, device, or machine. Remember, no matter how high-end your device is, it will always be susceptible to faults. Having maintenance management in your protocols can not only help with machine health but it can also be of advantage to the people working with the machines.

Having maintenance management can benefit you in these ways:

  • Longevity of the machine/device – If you do daily maintenance checks, you can easily spot possible faults that might occur. This will also save you from costly repairs.
  • It will keep the workplace a healthier environment – A well-conditioned machine keeps the workers around it more confident and assured that there won’t be any unwanted surprises.
  • Improves efficiency – if your tools are well-maintained, this will allow them to be more efficient and reliable. Accurate data and such can be expected from them.
  • Will be cost efficient – If your tools are working well, then there’s no use to spend on replacements. Whereas when you’re handling a machine that’s practically breaking down, then expect a lot of costly repairs to be made.

How efficient Fluke tools are for maintenance management?

We’re talking about the best of the best. Fluke tools are the most reliable tools for maintenance. Professionals, men, and women who work in the maintenance field prefer to have Fluke tools by their sides when doing maintenance rounds. Why? These tools aren’t just ahead of their time, but they also ensure every worker’s safety on the field. Here are the top reasons why you should have fluke tools with you during maintenance management…

  • They allow you to take measurements from afar so you don’t have to risk your safety by having close proximity to malfunctioning machines or devices.
  • Fluke can see what the naked eye cannot – they can spot possible faults that may occur.
  • These tools can also give a diagnosis of what you should do once a fault is spotted.
  • They can give and send real-time results.
  • Some Fluke features 2 or more functions in one. 
  • They encourage wireless testing.
  • Fluke instruments help to eradicate the drastic costs attributed to manual errors.

The best maintenance practice you can apply?

Do them as often as you can. If you have reliable Fluke tools by your side, why not test and test your equipment and machines as often as you can? The key to working closely with sensitive (but important) assets is to never be complacent with them. Usually, the best assets are also the costliest ones, and Fluke corporation understands this dilemma. Therefore, they built the best tools for the job.

So, as much as possible, the best maintenance management practice that is applicable anywhere and everywhere is to always evaluate your equipment are often as possible. Therefore, most maintenance men and women on the job roam around with a device in hand. Trust us when we say you will rarely see one without a testing tool with them. This is because most Fluke tools are not even that big that it becomes a nuisance to bring along. Most of them fit right in your pocket! So yes, they are not only dependable, but they are best for hand carry tools.

Going back… So how does maintenance management keep the world up and running again?

By simply taking care of the machines and equipment that makes the world go round of course! One of the main goals of maintenance management is to make sure that everything is working in its tippy-top condition. Living in a machine-generated world, this process speaks of significant importance every day. Add in Fluke tools in the picture, and we are pretty sure that things can last a bit longer.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop shop for the best test tools within Metro Manila.

Read more
, , , ,

The Difference Between Absolute Accuracy and Relative Accuracy

the-difference-between-absolute accuracy-and-relative-accuracy

These types of accuracy are commonly found in IR thermometers. So, when you have one, knowing the difference between absolute accuracy and relative accuracy will come in handy one way or another. So, first things first, what’s the catch between accuracy and IR thermometers? Don’t get us wrong, Fluke’s IR thermometers do not come short when it comes to performance, but rather, you would want to take note of a few extra tips to ensure accuracy in all operations using IR Thermometers.

This is applicable in different sectors.

Accuracy is of vital importance when it comes to any testing and maintenance operation. IR thermometers can be used in building automobiles, electrical components, processing food, and maintaining electrical systems. Using an IR thermometer can be quite beneficial for these types of projects and proves to be a safe and effective way to accurately inspect any electrical, electronic, and mechanical work.

Trust that these are the tools that can do the job well when it comes to sensing even the most subtle temperature differences that can break any of your machines and devices. What’s amazing about them is that it also promises workers safe troubleshooting and maintenance rounds by letting you test from a safe distance. So, if you’re testing hot, hazardous, or even moving targets, you’ll have the confidence to do tests without worrying about getting injured.

The two basic types of accuracy in IR Thermometers.

There are two types of accuracy related to infrared thermometers, and that is absolute accuracy and relative accuracy. Both entail a proper understanding of the ins and outs of an IR thermometer and of course, proper calibration. However, let’s get into the deep end of each to exactly know how they work.

Both relative and absolute accuracy works together. Relative accuracy only deals with certain operations. If the temperature of the target is not in comparison to the rest of the machine this entails relative accuracy. Ideally, this takes place when you’re testing or inspecting electrical and electromechanical systems, building envelopes, and circuit boards. Let’s take circuit boards as an example. When you find that one part of the component is hot then it might be an indication of an overload. Then again, if it shows that it’s cold, then you might be dealing with a failure. See how it only affects a part of the component but not a whole?

On the other hand, to achieve absolute accuracy, your tool needs to undergo proper calibration. Unlike relative accuracy, which deals with the action of testing and maintenance, absolute accuracy deals with your Fluke tool’s performance and how well it can produce results. Of course, there are certain precautions for you to get it right, but nonetheless, without proper and daily calibration, your IR thermometer might not produce on-point results.

Remember, that Fluke tools are also prone to deterioration and depending on how you care for them, they also have the tendency to decrease in performance which is why calibration is very important for Fluke tools.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You’re in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Read more
, ,

Top 3 Tools for Electrical Safety Testing

top-3-tools-for-electrical-safety-testing

You do not need a lot of tools and devices by your side with false promises of safety. Fluke tools are a pioneer in the industry because of their proven and tested ways to ensure worker safety during risky operations. When you are frequently exposed to dangerous electric materials and machines, these are the ideal tools for you to take. These three tools are the holy grail of ensuring safety and security in every operation.

What type of tool can ensure safety and security?

The type of tool that you want with you all the time are tools that can let you measure without any sort of contact. As much as possible, the safest way to do maintenance and test checks is within a safe distance. Insulated tools, PPE, and rubber soles can only do so much when you are up against powerful arc flashes and a faulty machine that can seriously damage your body.

Besides having a tool that can efficiently measure from afar, you also need a device that can accurately give you results. Therefore, Fluke tools are the ideal tools for the job. Fluke tools can give you the duality of safely testing faulty equipment and electric material within a safe distance, and at the same time, can give you an accurate and timely diagnosis.

The top three tools that can guarantee safe electrical testing…

As we have mentioned, you do not need a lot of tools to take with you to guarantee safety, you just need to take the right ones. These top three tools can give you electrical safety that is even better than bringing a whole toolbox with you. Considered the big three Fluke tools, the non-contact voltage testers, electrical testers, and digital multimeters will undoubtedly make every difference.

1) Fluke Non-Contact Voltage Tester…

This is a handy tool that is small enough to fit in your pockets. Its main function is detecting the presence of voltage with failed or malfunctioning assets. So, if ever you encounter one, the best tool that can give you the most accurate results is a non-contact voltage tester.

These tools can sense even the smallest amount of voltage current. The built-in sensor at the tip of the device lights up red (and waits for it to beep) this indicates that voltage is present in the material. What is great with this tool is you do not even need contact for it to work, and that alone is added safety for all workers already.

But beware, according to an official Fluke source, non-contact voltage testers can give a false negative indication (meaning it does not light up) when these instances occur…

  • The insulated test point touches grounded metal.
  • The cable being evaluated is partially buried.
  • The user is isolated from the ground.
  • It is used inside a metal enclosure.
  • Proximity testers also will not detect the presence of voltage through the shield on the shielded cable. To better understand why proximity testers, have these limitations, read the Fluke application note on the subject, “Understanding capacitive voltage sensors.” The key word is “proximity.”

2) Fluke Digital Multimeter

A great weapon of choice when you are evaluating any kind of electricity either for faults or simply doing maintenance rounds. These tools can multitask a lot and get plenty of testing done with just one device! Its testing capabilities do not just focus on one but feel free to evaluate voltmeters, ammeters, and ohmmeters as well.

Multimeters fall into one of a handful of categories:

  • General-purpose (aka Testers)
  • Standard
  • Advanced
  • Compact
  • Wireless

3) Fluke Vibration Testers

Every maintenance professional takes pride in having a Fluke Vibration Tester. Already tagged as the best and most advanced troubleshooting tool for mechanical maintenance. The device uses a special diagnosis technology that helps you immediately identify mechanical faults and prevent downtime and drastic measures to occur.

This device lets you…

  • Quickly analyze machine health.
  • Let us observe the severity of the faults.
  • It features enhanced reporting.
  • Gives you suggestions to solve the current machine situation.
  • Let us address critical problems in real-time.

Get your Fluke tools through an authentic source!

Hey, you made it to the bottom! Are you currently looking for the best-performing test tools in the market to run daily maintenance checks on your machines? You are in luck cause Presidium PH is an authorized distributor of Fluke test tools in the Philippines. Prevent these faults from penetrating your machine by using the best test tools there are!

If you want to know more about Fluke tools and their functions, visit our website for more info! This is a one-stop-shop for the best test tools within Metro Manila.

Read more