Peak Efficiency Cogeneration - Presidium PH - Official Fluke Tools Distributor

Presidium PH | #1 Authorized Fluke Distributor PH

official fluke distributor ph

fluke philippines

fluke products philippines

where to buy fluke tools ph

maintenance tools ph

fluke industrial tools ph

fluke multimeter philippines

test tools philippines
fluke test tools ph

Presidium PH | #1 Authorized Distributor of Fluke Tools in the Philippines

official fluke distributor ph

fluke Philippines

fluke products Philippines

Where to buy fluke products Philippines

test tools Philippines

maintenance tools Philippines
fluke industrial tools ph

Peak Efficiency Cogeneration

Cogeneration captures heat from energy-intensive industrial methods and puts it back to work. Basically, steam is the outcome of this process. And that steam can lead to a turbine generator or warm other components of the facility. For instance, heat recovery can increase energy efficiency by 30 percent or more. Cogeneration has accumulated a lot of attention. As a result, sophisticated and almost turnkey cogeneration solutions are now available in a variety of sizes.

Here are the three key areas of the cogeneration process to help your plant maximize productivity.

Enhancing heat recovery

Everything that permits heat to escape from a heat recovery system decreases efficiency. Insufficient or damaged insulation and failed steam traps are two areas that merit close attention. To find failed insulation, begin with a careful visual inspection. A thermal imaging tool is a big help here. Initially, what may look good to the naked eye may look completely different when viewed with a thermal imager. Inspection of all insulated piping and equipment with a thermal imager should be performed annually and after any maintenance that requires the removal of insulation.

Optimizing mechanical systems and equipment

Thermal imaging can also guide with repairing mechanical problems that can diminish the efficiency and reliability of a cogeneration operation. A vibration tester can then track the cause of overheated mechanical parts that have been detected with a thermal imager.

Peak Efficiency Cogeneration: Improving electrical systems

Electrical inefficiencies in cogeneration systems can be in both the electrical generation and distribution system and in electrical equipment that operates as part of the cogeneration system. If the generator of the cogeneration facility is providing a huge number of inductive loads, for instance, motors and transformers, it may be running at a poor power factor. Increasing power factor correction capacitors in the electrical distribution system will innovate the power factor, and more power from the generator will be available to do useful work in the distribution system.

Peak efficiency cogeneration maximizes the power of combined heat and proper with proper measurement and maintenance in three aspects in order to help your plant maximize reliability. Visit for more information.


All products shown in this webpage are representations only of the products wished to be promoted. It may vary color and size in actual appearance. Specifications of the use of the Fluke products can be found in the brochures that accompany each product and/or those found in the official website of Fluke.
The prices of the Fluke products are those indicated herein and they are true and correct as of the time they were published. Prices may change without prior notice.
Fluke products are designed for very specific and special purpose(s) and shall not be used for any purpose other than those expressly set forth in applicable Fluke product documentation. The registered trademark, marks, logos of Fluke products including patent, copyright, and other propriety rights belong to them exclusively.
Warranty of the products sold in this website are subject to certain and specific conditions which must be identified and known to the buyers prior to the purchase.
All rights reserved.


HOW TO PURCHASE: To place an order, you will be required to fill out the order form legitimately and press the “Add to cart / check out” button to submit your order. After this, you will receive an e-mail from us acknowledging that we have received your order.
AVAILABILITY OF PRODUCT: All orders for products are subject to availability.
SHIPPING: Customers will be responsible for paying for their shipping costs for deliveries. Shipping costs are nonrefundable. Orders placed on Friday will be processed and shipped the following Monday.
PRODUCT QUALITY CONCERNS: Product that is unusable due to reasons related to Product quality arising out of the manufacturing of the Product.
PRODUCT DEATH ON ARRIVAL (DOA): Product that purchased is defective once arrived.
REPLACEMENT POLICY: We only replace product if they are defective or damaged. In circumstances where you consider that a product is defective, you should promptly contact us at • +632 84590167 • +632 82570795 • +632 82515165 or email us at with details of the product and the defect.
  • You must notify us thru email or contact us if you wish to return or replacement of the product.
  • You have 7 calendar days to return an item from the date you received it.
  • To be eligible for a return, your item must be unused and in the same condition that you received it.
  • Product must be in original packaging, including instruction manuals and all accessories. Product must be unused and in original condition.
  • Item needs to have the receipt or proof of purchase.
  • Your item would be subject for checking of our Technical support before replacement.
CONTACT: If you have any queries regarding these terms and conditions, please contact us at • +632 84590167 • +632 82570795 • +632 82515165 email us at