Electrical Safety Standards - PRESIDIUM.PH

Presidium PH | #1 Authorized Fluke Distributor PH

official fluke distributor ph

fluke philippines

fluke products philippines

where to buy fluke tools ph

maintenance tools ph

fluke industrial tools ph

fluke multimeter philippines

test tools philippines
fluke test tools ph

Presidium PH | #1 Authorized Distributor of Fluke Tools in the Philippines

official fluke distributor ph

fluke Philippines

fluke products Philippines

Where to buy fluke products Philippines

test tools Philippines

maintenance tools Philippines
fluke industrial tools ph

Electrical Safety Standards

Electricity is a powerful form of energy. Therefore, following electrical safety standards is highly important. It is a given fact that electricity in its entirety is dangerous when not respected.

Presidium will help build a proper multimeter to protect anyone against electrocution, arc explosion, and other unnecessary incidents. A well-built-multimeter will carry a Measurement Category III rating and third-party certification of an independent test lab.

However, don’t be complacent with your meter. Regularly rated meters are preferable to those that aren’t. If not rated, the consequences might be drastic. Another factor is not having proper certification. This automatically does not guarantee any protection for you and for the device. This will eventually lead to insulation breakdown or arc explosion.

Presidium is an authorized distributor of Fluke Tools.

Why Presidium carries out Fluke Industrial Group tools and Fluke Calibration is that it takes the process of measuring the performance of products very seriously. All Fluke’s test and measurement tools are of high quality in performance and in results. It has the ability to exceed the expectations and safety requirements of a Product Compliance Laboratory.

To be simplified by Mr. Thomas Smith, A Product Compliance Manager, “We put the tools through a variety of foreseeable use and misuse scenarios replicating the conditions we’ve learned from our customers and Once we know the tools demonstrate sufficient safety margin and robustness here, we can be confident in knowing they’ll provide a high level of protection in the real world.

Fluke Products undergoes a series of performance and safety tests and is certified by a third party. All of the products go through is…

  • Baked
  • Frozen
  • Dunked in water
  • Choked by dust clouds
  • Rattled with vibration
  • Bashed on the floor
  • Zapped with electricity repeatedly

The Fluke Product Compliance Laboratory

The Fluke Product Compliance Laboratory has different workstations. It’s a mix from jutting out from the ceiling, walls, and down to the center of a large bright room. Safety engineers’ experts who are testing protocols and safety standards push Fluke tools and instruments to their limit and even up to their breaking point. “We test at least one level beyond the standard. Additionally, our work in foreseeable misuse has led to the development of new standard requirements.” Smith, added.

Furthermore, Fluke actually takes advantage of a variety of tests. Design weaknesses and errors are inevitable and they can happen to a lot of devices. Therefore, the lab has designed special testing to spot these faults immediately. Basically, these tests will benefit users by providing and utilizing protection as much as possible to avoid the dangers of working with electrical systems.

Presidium PH Corporation is an authorized distributor of Fluke Industrial Group and Fluke Calibration products in the Philippines. Having said that Fluke Corporation is the world leader in the manufacture, distribution, and service of electronic test tools, biomedical equipment, and networking solutions. Fluke Product Compliance Laboratory is accredited through CSA to test and certify products for their certification mark. Test procedures are laid out in detail and adhered to rigorously. Once a product has passed the appropriate tests, documentation is sent on for approval and registration.

Testing for safety and reliability

Fluke works with all nationally recognized test labs (NRTLs) such as the: CSA (Canadian Standards Association). The Fluke Products are accredited through CSA to test and certify products for their certification mark. Meanwhile, test procedures are laid out to make certain that it adheres to the requirements. Then, when products have passed the tests, documentation will be sent for approval and registration.

Fluke is also in partnership with the UL (Underwriters Laboratories), TÜV (Technischer Überwachungs-Verein), and ETL/Intertek. On the other hand, we make sure that Fluke lab meets all national and international requirement standards for the safety of every user.

All high-quality test instruments should undergo similar testing. Let’s talk about the example approaches of Fluke testing:

Impulse test

The first test is the impulse test that simulates a transient on an electrical installation from nearby lightning strikes or other large electrical disturbances from the switchgear. To test it, a meter is placed in a chamber and injected with a pulse of thousands of volts of electricity. Meanwhile, this process is to verify whether the meter protection will break down, tear up, or arc over. For this testing, a special test machine is used to generate the high voltage transient and fault current as defined by international and national standards.

Multi-Functional overload test

A test instrument should also undergo an inspection to make sure that it is able to withstand accidental overloads associated with the various functions of the meter. Fluke does this by utilizing the multi-functional overload test. This test involves injecting a high percentage of energy voltage into non-voltage measurement functions, testing for a case in which an operator mistakenly sends voltage into a non-voltage meter function. This mostly occurs if the user leaves the leads in the amps input jacks and then accidentally connects the leads across a voltage source: they have just created a short through the test instrument.

Highly accelerated lifetime test (HALT)

To guarantee the lastingness and permanence of its tools, Fluke uses HALT. This test is a combination of using a high-frequency 6-axis vibration at more than 150 GRMS (root-mean-square acceleration) with extremely fast temperature swings to simulate a lifetime of wear and tear. The chamber has the capability of going from -100 °C (-148 °F) to 200 °C (392 °F) in minutes, testing the tool’s ability to withstand elevated and combined stresses.

Transport under rugged conditions

Another important test is to simulate meters. This is usually done in rugged and rough conditions, such as in off-road vehicles used by the military. To test this, engineers place the meter on a vibration table where it is shaken at over 3 GRMS for at least 30 minutes per axis, repeatedly. With Fluke tools, one test is never enough. This is why meters are tested in several conditions to account for all circumstances.

Other tests are:

  • Anechoic chamber lab test – To withstand radiated electromagnetic interference without displaying erroneous readings, and do not emit disruptive radiation.
  • Drop test – To withstand surprises of breaking even at the lowest temperature rating of the product.
  • Electrical static discharge (ESD) – To withstand static electricity.
  • Ingress Protection (IP), Dust, and Water tests – To test resistance to dust intrusion and water (dripping, spraying, and submersion depending on the rating), respectively.
  • Temperature/humidity/altitude chambers – To test resistance to atmospheric extremes.

Safe handling, bringing safety home.

The first thing to avoid is the industrial outage that could affect hundreds of employees. Other than that, it can also terminate equipment worth millions, and bring production and revenue to closure. It is highly important to have a maintenance team to rely on especially with tools that are tough enough to survive the dust, water, falls, and impacts common in industrial settings. All professionals would demand to see the same level of accuracy, performance, and reliability from their tools.

Safety standards to live by

The Switzerland-based International Electro-technical Commission (IEC) 61010 has established the Measurement Category or what you’ll be familiar with (CAT) and they also have voltage ratings for electrical environments. These CAT ratings are based on how high-energy transient travels through the network resistance of the electrical installation. The ratings will help determine if the tools can withstand voltage transients.

  • A single-phase receptacle-connected loads such as appliances and portable tools. – CAT II
  • The three-phase distribution including single-phase commercial lighting and equipment in fixed locations such as switchgear and polyphase motors. – CAT III
  • The 3-phase at the utility connection, outdoor conductors, electricity meters, and service entrances. – CAT IV

CAT Ratings…

To be exact, a high CAT number will refer to an electrical environment with higher power available and higher energy transients. Thus, a multimeter designed to a CAT III standard is resistant to higher energy transients than one designed to CAT II standards.

Forensic investigations have determined that without a Measurement Category circumstances might get more dangerous. If the rating of interior test equipment does not match the task, it will lead to an explosion if not used properly. Therefore, it is of utmost importance to make sure that your electrical testing tools have been independently evaluated. Having this kind of evaluation can you only be certain that your tools can withstand voltage transients. Moreover, the main goal is to certify that your test device meets the electrical safety standard. Standardization bodies, such as the IEC and NFPA, are not responsible for enforcing their test tool safety standards. Ultimately, any test instrument you use should be certified by at least one independent testing agency.

Let’s admit that even the most careful person can make mistakes that’s why electrical safety standards are important. Test instruments should help back you up. Moreover, it should also provide you with the right protection against inappropriate voltages. To meet the demands of today’s high-energy, high-hazard workplace, quality manufacturers like Fluke continue to improve their test instruments to make them safer and more reliable. Fluke goes a step further in designing and building our test tools with stout input protection. Ultimately, these are tools that are reliable and safe for every user.

Here are five mistakes to avoid in the field:

  1. Don’t use outdated or defective test equipment.
  2. Never neglect to properly inspect test instruments and test leads for damage or possible contamination.
  3. Don’t use the improperly rated test tools for the job.
  4. Stop replacing original fuses with inadequate ones.
  5. Don’t work on a live voltage without proper preparation.

It’s vitally important to take safety precautions when working with electricity. Remember that you are the most valuable asset in the field. Following organizational measures and safety standards help avoid and prevent harmful and dangerous circumstances.

We at Presidium Corporation are ready to support you with highly qualified products and trained specialists! We carry the latest technology products and can cater to most industries in the Philippines. Want to know more about our products? Contact us now +632 82515165. Or visit our website at www.presidium.ph


All products shown in this webpage are representations only of the products wished to be promoted. It may vary color and size in actual appearance. Specifications of the use of the Fluke products can be found in the brochures that accompany each product and/or those found in the official website of Fluke.
The prices of the Fluke products are those indicated herein and they are true and correct as of the time they were published. Prices may change without prior notice.
Fluke products are designed for very specific and special purpose(s) and shall not be used for any purpose other than those expressly set forth in applicable Fluke product documentation. The registered trademark, marks, logos of Fluke products including patent, copyright, and other propriety rights belong to them exclusively.
Warranty of the products sold in this website are subject to certain and specific conditions which must be identified and known to the buyers prior to the purchase.
All rights reserved.


HOW TO PURCHASE: To place an order, you will be required to fill out the order form legitimately and press the “Add to cart / check out” button to submit your order. After this, you will receive an e-mail from us acknowledging that we have received your order.
AVAILABILITY OF PRODUCT: All orders for products are subject to availability.
SHIPPING: Customers will be responsible for paying for their shipping costs for deliveries. Shipping costs are nonrefundable. Orders placed on Friday will be processed and shipped the following Monday.
PRODUCT QUALITY CONCERNS: Product that is unusable due to reasons related to Product quality arising out of the manufacturing of the Product.
PRODUCT DEATH ON ARRIVAL (DOA): Product that purchased is defective once arrived.
REPLACEMENT POLICY: We only replace product if they are defective or damaged. In circumstances where you consider that a product is defective, you should promptly contact us at • +632 84590167 • +632 82570795 • +632 82515165 or email us at info@presidium.ph with details of the product and the defect.
  • You must notify us thru email or contact us if you wish to return or replacement of the product.
  • You have 7 calendar days to return an item from the date you received it.
  • To be eligible for a return, your item must be unused and in the same condition that you received it.
  • Product must be in original packaging, including instruction manuals and all accessories. Product must be unused and in original condition.
  • Item needs to have the receipt or proof of purchase.
  • Your item would be subject for checking of our Technical support before replacement.
CONTACT: If you have any queries regarding these terms and conditions, please contact us at • +632 84590167 • +632 82570795 • +632 82515165 email us at info@presidium.ph