It’s inevitable that big machineries lie the ones companies use in manufacturing companies, require a huge amount of power in order for it operate. In a day to day basis, hundreds of thousands of machines are operating so you can just imagine the all that power being consumed in a certain location. It’s taken a lot of research and developments, but there is actually a way to consume less or good power quality.

Good Power Quality is defined as a steady supply voltage that stays within a prescribed range, steady frequency close to the rated value, and smooth voltage curve waveform. There are devices that are able to measure the quality of power used, and these devices can also optimize the productivity of the power used. But what is the importance in doing all of this? Let’s find out.

The consequences of poor power quality, such as power factor and harmonics, can not only be a direct hit on the bottom line because of surcharges by local utilities, but also because dirty power can cripple crucial equipment and lead to downtime.

Origins of most power problems inside facilities.

• Installation – improper grounding or routing of wires, or undersized distribution.
• Operation – equipment is being operated outside design perimeters.
• Mitigation – improper shielding or lack of power factor correction
• Maintenance – deteriorated cable insulation

Even though a machine has been properly installed, it can still later on show multiple issues and problems as it is constantly being used and the machine itself ages as well. Moreover, power issues can also come for external factors such as unpredictable outages, voltage sags, and power surges.

Even though there is a cost associated with power quality, it is still important that you invest in the right tools and devices that will help you control the power that is running through your machines. Because if not, it may easily destroy your machines, and that will be a much bigger cost.

Fluke power quality and energy tools, including single-phase and three-phase loggers and analyzers, are designed for industrial and commercial applications to measure power quality and quantify those associated costs.

For inquiries, you may message https://presidium.ph/contact-us/ or contact us at (02) 464 9339

Success can be measure on how well you equip yourself to do your work. When it comes to electrical testing processes, it is essential to be sure of the tools you are going to use for the job. Determining the right electrical testing tool requires a thorough assessment of your needs. Though you have two of the best electrical measuring devices in Digital Multimeters and Clamp meters, there is nothing better than understanding the true operation of both of these products and how each of them can provide different benefits on your measurement operations.

Digital Multimeter

There is an impression that digital multimeter is a direct contact instrument while clamp meter is an inductive instrument. This leads to the conclusion that the only difference between the two is their input method. However, Digital Multimeter (DMM) is essentially a voltage measuring tool that is capable of current inducing abilities. DMM enables an electrician to measure milliunits (millivolts, milliamps, and milliohms) with its high resolution feature. It also allows electrical measurements with the exception of current unless it is equipped with a clamp accessory. Technically, if you are looking to just generate accurate voltage measurements, then DMM is the one that is primarily designed to conduct such measurement operations.

Clamp Meter

Clamp meters, in comparison, measures to the nearest tenth of a unit, rather than in the milli-units provided by digital multimeters. In electronic work this is a perfect and efficient resolution. This tool is essentially a current-measuring tool with some voltage abilities which makes it easier to conduct measurements on the load side of a breaker. Simultaneous voltage and current measurements are simply part of troubleshooting. However, there are dilemmas on how theses simultaneous measurements can be conducted via one meter only. For electricians, a clamp meter is the most versatile diagnostic tool available. However, the exact combination and utilization of test equipment still depends on the type of work you will be facing, and the type of measurements you need to make. Here are some of the situations and ideas you may consider during your measurement operations:

• If your job requires only the basic voltage measurements, then you can use a basic DMM
• If you need the high resolution and advanced features not found on clamp meters, a high-end DMM could fit with that.
• If you just need to ensure all three phases on your feeders are pulling the same current, a basic clamp meter is all you need
• An advanced clamp meter is right for you if you have intermittent breaker trips that you need to resolve.

Bottom Line Benefits

Both of these tools have their own advantages from each other but it can be safe t say that it perfectly fit for each other. Whenever there are simultaneous measurement needs, you can utilize both of these instruments together in a one-compressed tool in order to accurately measure any current and voltage leads.

In relation, we all know it’s costly not to have the right tools for the job. That is why you need a trusted provider that you can always count on for your measurement needs. Presidium.ph Corporation is an official distributor of high-quality electronic test tools in the country. You can count on us to provide you every testing tools you need whenever and wherever your operations are! Have accurate measurements of your electrical processes with our wide array of Fluke digital multimeters and clamp meters.

For more info, you can contact us at +632-464-9339 or visit our website at www.presidium.ph.

An infrared camera, also known as a thermal imager, can be a big investment for any company or individual. While it is a very useful tool, it is still important to determine your Return on Investment (ROI). There are a lot of variables that contribute to your ROI, depending if you’re a plant manager, or a contractor/consultant. Here are some of them:

For Industrial Plant Managers, ROI can come from using infrared cameras for inspection and troubleshooting. Factors include:

Saved downtime

There’s no need to turn off equipment during an inspection so plant managers don’t lose valuable production time.

Increased productivity

Infrared inspections are non-contact, which means that technicians can scan large areas from a safe distance, and at a faster speed.

Improved production efficiency

Subtle problems can be found and addressed easily before they have a major impact on production.

Reduced capital expenses

Maintaining equipment properly can extend their average life expectancy. Through a thermal imager, technicians can find and repair problems before the equipment breaks down.

For Consultants and Contractors, ROI is based on how much more money can be earned by using a thermal imager. Factors that can increase sales include:

Increased productivity

Complete more work in less time by being able to quickly scan areas to find air leaks, insulation gaps, moisture, and overheated electrical components.

Easier sales

Eliminate guesswork and show potential clients exactly what the problem is, and what needs to be repaired, on an infrared camera.

More word of mouth referrals

With a thermal imager, you will not only resolve problems, but also send customers a before and after scan of the same area so they can compare results. This will lead to more satisfied clients and more referrals.

To get a quick estimate on your ROI, try using the Fluke Thermal Imaging ROI Calculator.

Fluke is a trusted manufacturer of numerous tools and test instruments including infrared cameras. In the Philippines, Presidium.ph Corporation is an official distributor of Fluke products. For additional queries, contact Presidium at +632 464 9339 or info@presidium.ph.

Various energy saving methods and energy-saving appliances or devices have been around in the market for years now. There’s no wonder that energy-saving hacks is really important nowadays because of the unstable price of energy from various utility companies.

This is where the importance of thorough power quality analysis and energy studies comes out. This is to ensure that the overall electrical system health of any facilities is well taken care of and assessed for any malfunctions and/or wear and tear that can even cause higher electrical consumption.

Now, in order to have a comprehensive systems analysis and energy studies, you’ll need an ideal tool that can help you out – just like the Fluke 1738 Advanced Power Energy Logger.

This tool is effective for:

• Load studies — verify electrical system capacity before adding loads. The 1738 is also suitable for NEC 220 load studies.
• Energy assessments — quantify energy consumption before and after improvements to justify energy saving expenditures.
• Harmonic measurements — uncover harmonic issues that can damage or disrupt critical equipment.
• Voltage and current event capture — monitor for dips, swells, and inrush currents that cause false resets or nuisance circuit breaker trips.

Fluke 1738 is a three-phase advanced Fluke Connect compatible-power logger for making critical power quality and energy decisions in real time. It also automatically captures and logs voltage, current, power, harmonics, and other associated power quality values. The tool provides the highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream and automatically logs all measured values and stores more than 20 separate logging sessions.

Since the tool is part of the Fluke Connect^® system of software and more than 30 wireless test tools, the Fluke 1738 allows the technicians and electricians to access and share data remotely with their entire team via Fluke Connect app. You can also access the logger through the facilities’ Wi-Fi infrastructure so you can maintain safer working distances, reducing the need for protective equipment, site visits, and check ins.

Energy consumption is indeed a vital issue that always needs to be addressed properly and thoroughly to make sure that no financial resources is being compromised. Hence, a comprehensive power quality and energy study is very crucial as well. Make sure that you got the best Fluke products with you at work to ensure effectiveness, reliability, and durability all in one tool.

Visit www.presidium.ph for more information!